Share
Print
DAYTON
Centrifugal Pump: 3 hp, 230V AC, 74 ft Max Head, 2 in , 1 1/2 in Intake and Disch, TEFC, 1 Phase
Hover over image to magnify
#920461-4 | Pkg Qty: 1
$1,393.36 pkg | $1,393.36 ea
This item requires special shipping, additional charges may apply.
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
c UL us
Maximum Fluid Viscosity
100 SSU
Amps
-/12.5 A
Maximum GPM @ Head
170 gpm @ 10 ft.
Bearing Type
Ball
Maximum Head
74
Bearings
Ball
Maximum Liquid Temperature
200°F
Best Efficiency GPM @ Head
95 GM @ 57 FT.
Maximum Pressure
32.03 psi
Best Efficiency Range GPM @ Head
30 to 140 GPM @ 75 to 35 ft.
Maximum Specific Gravity
1
Brand
DAYTON
Mfr. Part Number
2ZWX1
Drain Plug
Easily Accessible, 2 Position
Mfr. Warranty Length
1 yr.
Duty
Continuous
Minimum GPM @ Head
35 gpm @ 70 ft.
Duty Cycle
Continuous
Motor Enclosure
TEFC
Frame
56J
Motor RPM
3450
GPM of Water @ 10 Ft. of Head
170
Motor Type
Capacitor Start
GPM of Water @ 15 Ft. of Head
166
NEMA/IEC Frame
56J
GPM of Water @ 150 Ft. of Head
166
Number of Port Positions
4 Position
GPM of Water @ 20 Ft. of Head
162
Outlet Size
1-1/2 in. NPT
GPM of Water @ 25 Ft. of Head
154
Pack Quantity
1
GPM of Water @ 30 Ft. of Head
146
Phase
1
GPM of Water @ 40 Ft. of Head
130
Port Rotation
4 Position Increments
GPM of Water @ 50 Ft. of Head
110
Pump Height
7 in.
GPM of Water @ 60 Ft. of Head
82
Pump Length
14-13/16 in.
GPM of Water @ 70 Ft. of Head
35
Pump Size
2 in. X 1-1/2
Height
7 in.
Screw Material
Stainless Steel
Horsepower
3
Seal Application
Long Life When not Run Dry or Pumping Abrasives
Housing Material
Stainless Steel
Seal Material
Carbon, Ceramic, Stainless Steel, Viton
Hz
60
Seal Type
Mechanical
Impeller Material
Stainless Steel
Service Factor
1
Impeller Type
Semi Open
Shaft Material
Stainless Steel
Inlet
2 in. NPT
Shaft Size
5/8 in.
Inlet Pressure
200 psi
Shipping Weight
70.75 lb.
Item
Straight Centrifugal High Flow Pump
Type
Centrifugal
Length
14-13/16 in.
Voltage
240 VAC
Liquid Compatibility
Nonflammable, Non Abrasive
Volute Material
Stainless Steel
Maximum Case Pressure
200 psi
Wetted Materials
Carbon, Ceramic, Stainless Steel, Viton
Maximum Diameter Solids
1/2 in.
Width
7-5/8 in.
General
Application
Suitable for general transfer, boiler feed, condensate return, water circulation, irrigation, cooling towers, filtration, and pressure boosting.
Impeller Design
Semi-Open
Best Efficiency Flow
95 gpm
Includes
Manual
Best Efficiency Head
57 ft
Intake Type
NPT
Compatible Discharge Pipe Size
1 1/2 in
Intake and Discharge Size
2 in , 1 1/2 in
Compatible Intake Pipe Size
2 in
Manufacturer Warranty Length
1 yr
Compatible with Media Type
Non-Flammable Liquids
Maximum Feet of Head
74 ft
Discharge Rotation
90 Degrees Increments
Maximum Media Temperature
200 Degrees F
Discharge Type
NPT
Minimum Media Temperature
40 Degrees F
Feet of Head (Minimum)
10 ft
Motor Enclosure Type
TEFC
Flow Rate @ 10 ft of Head (Maximum)
170 gpm
Motor Frame Designation
56J
Flow Rate @ 15 ft of Head (Maximum)
166 gpm
Nameplate Voltage
230V AC
Flow Rate @ 20 ft of Head (Maximum)
162 gpm
Nominal Voltage
230V AC
Flow Rate @ 30 ft of Head (Maximum)
146 gpm
Pump Housing Material
Stainless Steel
Flow Rate @ 40 ft of Head (Maximum)
130 gpm
Pumping Application
Aggressive Liquid Applications and Other General Purpose Pumping, Boiler Feed, Boosters, Chemical Processing, Condensate Return, Cooling Towers, Filtration, Fountains, General Transfer, Irrigation, Jockey Pump Service, Marine Applications, Spraying Systems, Utility, Water Circulation
Flow Rate @ 50 ft of Head (Maximum)
110 gpm
Shut Off Pressure (Maximum)
32 psi
Flow Rate @ 60 ft of Head (Maximum)
82 gpm
Solid Diameter (Maximum)
0.5 in
Flow Rate @ 70 ft of Head (Maximum)
35 gpm
Specific Gravity (Maximum)
1
For Use With
Non-Flammable and Non-Abrasive Liquids Compatible with Pump Component Materials
Wetted Material
Carbon, Ceramic, Stainless Steel, Viton
Product Description
Dayton close-coupled units pump continuously, producing high flow rates under low-head conditions. Designed for continuous low-pressure circulation and transfer of nonflammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fountains, boosters, water circulation, irrigation, spraying systems, jockey pump service, chemical processing, aggressive liquid applications, and other general purpose pumping compatible with pump component materials where no suction lift or self priming is required.
Expertly Selected Product Pairings
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Pump,Centrifugal, 3 Hp, 1 Ph,
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 2ZWX1 | Pump, Centrifugal, |
 | UNSPSC CODES | 40151503 | |
 | VMRS (ATA) CODES | 053-006-009 | Pump, Centrifugal, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here