This item is currently unavailable. Shop Alternates
Share
Print
DAYTON
Dayton Recessed Electric Wall-Mount Heater: 1,000W, 120V AC, 1-phase, White
Hover over image to magnify
#938672-6 | Pkg Qty: 1
$356.07 pkg | $356.07 ea
Unavailable
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
cULus
Mfr. Part Number
3ENC7
Air Flow
65 cfm
Mfr. Warranty Length
1 yr.
Amperage
8.3 A
Mounting Location
Wall or Ceiling
Amps AC
8.3
Mounting Type
Recessed
Brand
DAYTON
Package Quantity
1
Color Family
White
Phase
1
Control Type
Mechanical Selector Dial
Programming Capability
Not Programmable
Finish
Polyester Powder Coating
Requires
Proper Gauge Wire for Distance From Heater to Breaker Panel for Load
Frequency
60 Hz
Shipping Weight
9.85 lb.
Heating Capacity
3,413 BtuH
Tamper Resistant
Yes
Heating Method
Fan Forced
Type
Residental, Light Commercial
Housing Depth
3-3/4 in.
Voltage
120 VAC
Housing Height
11-1/4 in.
Wall Opening Depth
3-3/4 in.
Housing Material
Steel
Wall Opening Height
11-1/4 in.
Housing Width
9-1/2 in.
Wall Opening Width
9-1/2 in.
Hz
60
Watts
1000
Item
Recessed Electric Wall-Mount Heater
General
Air Temp. Rise
40 Degrees F
Minimum Mounting Height from Floor
4 in
Automatic Fan Delay (On/Off)
Yes
Nominal Voltage - HVAC
120V AC
BtuH
3413
Remote Control Functions
No Remote Control Included
Disconnect Switch
Yes
Rough-In Depth
3 3/4 in
Grille Depth
1 in
Rough-In Dimensions - H x W x D
11-1/4 in x 9-1/2 in x 3-3/4 in
Grille Finish
Powder Coated
Rough-In Height
11 1/4 in
Grille Height
12 1/2 in
Rough-In Width
9 1/2 in
Grille Material
Steel
Smart Connectivity
No Connectivity
Grille Width
10 3/8 in
Thermal Overheat Protection
Automatic Reset
Heater Mounting Position
Horizontal Burn
Thermostat Contact Type
Single Pole
Includes
Built-in Thermal Cutout, Fan Delay Switch
Thermostat Included
Unit-Mounted
Key Features
Mechanical Controls, Overheat Protection, Tamper Resistant
Voltage, Phase
120V AC, 1-phase
Minimum Mounting Distance from Ceiling
12 in
Wattage Output
1,000W
Product Description
Compact recessed electric wall heaters heat areas with limited installation or mounting space, like restrooms, bedrooms, hallways, or offices. These fan-forced heaters install in an opening in the wall near the floor so heat flows into the space to be heated. They have a built-in thermostat.
Item Barcode
Cmpct Recssd Elct Wl Heatr,11-
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 3ENC7 | |
 | UNSPSC CODES | 40101814 | |
 | VMRS (ATA) CODES | 053-006-009 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here