Home All Products Fluid Transfer & Pumps Water Pumps Centrifugal Pumps Straight Pumps (above 80' Of Max. Head) SKU: 938348-4
Share  
Print  
DAYTON

240V AC Totally Enclosed Fan-Cooled Centrifugal Pump, 1-Phase, 1-1/2 in NPT Inlet Size

Hover over image to magnify
Pump,3 Hp,1 Ph,240VAC
Pump,3 Hp,1 Ph,240VAC

#938348-4 | Pkg Qty: 1

$815.01 pkg | $815.01 ea
This item requires special shipping, additional charges may apply.

Drop Ship Item

Shipping to 60045
|

Technical Specifications

Key Specifications
Agency Compliance
UL Approval in. Motor
Motor Type
TEFC
Amps
-/12.5
NEMA/IEC Frame
56J
Bearing Type
Ball
Number of Port Positions
4
Best Efficiency GPM @ Head
95 @ 57 ft.
Outlet
1-1/4 in.
Brand
DAYTON
Pack Quantity
1
Drain Plug
Easily Accessible
Phase
1
Duty
Continuous
Port Rotation
4 Position Increments
Duty Cycle
Continuous
Screw Material
Zinc Plated
Frame
56J
Seal Application
Long life When Not Run Dry or Pumping Abrasives
Housing Material
Cast Iron
Seal Type
Mechanical Carbon on Ceramic
Hz
60
Service Factor
1
Impeller Material
Cast-Iron
Shaft Material
Stainless Steel
Impeller Type
Closed
Shipping Weight
77.18 lb.
Inlet
1-1/2 in.
Type
High Head
Inlet Pressure
200 PSI
Voltage
230 VAC
Mfr. Part Number
2ZXK2
Volute Material
Cast Iron
Mfr. Warranty Length
1 yr.
Wetted Materials
Carbon, Cast Iron, Ceramic, Stainless Steel, Viton
Motor Enclosure
TEFC
Width
8-3/4 in.
Motor RPM
3450 RPM
General
Application
Rugged Close-Coupled Pumps Continuously Produce High Head Condition
Flow Rate @ 60 ft of Head (Maximum)
79 gpm
Best Efficiency Flow
95 gpm
Flow Rate @ 70 ft of Head (Maximum)
72 gpm
Best Efficiency Head
57 ft
Flow Rate @ 80 ft of Head (Maximum)
63 gpm
Compatible with Media Type
Non-Flammable Liquids
Flow Rate @ 90 ft of Head (Maximum)
55 gpm
Discharge Rotation
90 Degrees Increments
For Use With
Nonflammable and Nonabrasive Liquids
Discharge Type
NPT
Includes
Manual
Feet of Head (Minimum)
10 ft
Intake Type
NPT
Flow Rate @ 10 ft of Head (Maximum)
107 gpm
Maximum Feet of Head
130 ft
Flow Rate @ 100 ft of Head (Maximum)
43 gpm
Maximum Media Temperature
200 Degrees F
Flow Rate @ 120 ft of Head (Maximum)
17 gpm
Nominal Voltage
230V AC
Flow Rate @ 20 ft of Head (Maximum)
103 gpm
Pumping Application
Aggressive Liquid Applications and Other General Purpose Pumping, Boiler Feed, Boosters, Chemical Processing, Condensate Return, Cooling Towers, Filtration, Fountains, General Transfer, Irrigation, Jockey Pump Service, Marine Applications, Spraying Systems, Utility, Water Circulation
Flow Rate @ 30 ft of Head (Maximum)
98 gpm
Shut Off Pressure (Maximum)
56 psi
Flow Rate @ 40 ft of Head (Maximum)
92 gpm
Solid Diameter (Maximum)
0.31 in
Flow Rate @ 50 ft of Head (Maximum)
87 gpm
Wetted Material
Carbon, Cast Iron, Ceramic, Stainless Steel, Viton

Product Description

Dayton close-coupled units pump continuously, producing high flow rates under low-head conditions. Designed for continuous low-pressure circulation and transfer of nonflammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fountains, boosters, water circulation, irrigation, spraying systems, jockey pump service, chemical processing, aggressive liquid applications, and other general purpose pumping compatible with pump component materials where no suction lift or self priming is required.

Expertly Selected Product Pairings

Pump Repair Kit,For 2ZXK2,2ZXK3
$112.76 pkg | $112.76 ea
Item: 938374-8 | Pkg Qty: 1

Compliance & Restrictions

California Proposition 65 Icon
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Documents

Sell Sheet
Item Barcode
9383484
Pump,3 Hp,1 Ph,240VAC
 NameItemDescription
Grainger DropshipGrainger Dropship2ZXK2
UNSPSC CODESUNSPSC CODES40151503
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009

For more product information by email, click here