Proto Number of Pieces 1, 258, Technician, Metric, SAE, Tool Storage Included Yes

Breaker Bar: 5-3/4 in, Flex Socket Extension: 6-1/4 in, Flex Socket Hex: 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, Flex Socket 12 PT: 1/2 in, 1/4 in, 11/32 in, 3/8 in, 5/16 in, 7/16 in, 7/32 in, 9/16 in, 9/32 in, Hand Ratchet, Sliding T-Handle: 4-1/2 in, Socket: 5/32 in, Socket Deep 12 PT: 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, Socket Bit Phillips:

7

Breaker Bar: 20 in, Hand Ratchet, Impact Socket 6 PT: 1 in, 1-1/16 in, 1-1/4 in, 1-1/8 in, 13/16 in, 1-3/16 in, 15/16 in, 1-5/16 in, 3/4 in, 7/8 in, Sliding T-Handle, Socket Extension: 4 in, 8 in, 16 in, Socket 12 PT: 1 in, 7/8 in, 1-1/16 in, 1-1/2 in, 1-11/16 in, 1-13/16 in, 1-1/4 in, 1-1/8 in, 1-3/16 in, 1-3/4 in, 1-3/8 in, 15/16 in, 1-5/16 in, 1-5/8 in, 1-7/16 in, 1-7/8 in, 1-9/16 in, 2 in, 2-1/4 in, 2-1/8 in, 2-3/16 in, 2-3/8 in, Universal Joint

2

(3) Hand Ratchet, Locking Extension: 6 in, Breaker Bar: 8-1/4 in, Crowfoot Open End: 1/2 in, 11/16 in, 13/16 in, 3/4 in, 3/8 in, 5/8 in, 7/8 in, 7/16 in, 9/16 in, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, Flex Socket Extension: 8 in, Impact Driver: 5-1/2 in, Impact Socket 6 PT: 1 in, 1/2 in, 1/4 in, 11/16 in, 11/32 in, 13/16 in, 15/16 in, 3/4 in, 3/8 in, 5/16 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in, 9/32 in, Impact Socket Extension: 12 in, Impact Universal Joint, Power Hex Bit Holder, 1/4 in, 1-15/16 in, Ratchet Adapter, Sliding T-Handle, Socket 12 PT: 1 in, 1/2 in, 1/4 in, 11/16 in, 13/16 in, 15/16 in, 3/4 in, 3/8 in, 5/16 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 18mm, 19mm, Socket 6 PT: 1 in, 1/2 in, 1/4 in, 11/16 in, 13/16 in, 15/16 in, 3/16 in, 3/4 in, 3/8 in, 5/16 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, Socket 8 PT: 1/2 in, 1/4 in, 3/8 in, 5/16 in, 7/16 in, Socket Bit Hex Extra Long: 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, Socket Bit Hex: 1/4 in, 1/8 in, 3/16 in, 3/8 in, 5/16 in, 5/32 in, 7/32 in, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, Socket Bit Phillips:

38

Aviation Snips Left: 10 in, Aviation Snips Right: 10 in, Aviation Snips Straight: (2) 10 in, Duckbill Straight: 7 in, Folding Pocket Knife: 8-3/4 in, Hacksaw High Tension: 12 in, Hacksaw Mini: 10 in, Safety Knife: 5-7/8 in, Tinners Snips Straight: 12-3/4 in, 14 in, Tubing Cutter, 6 in, Utility Knife Gray: 6 in

22

Ignition Point File: 5-1/4 in

23

Bolt Extractor: 7mm (Turns 1/4, 9/32 in), 8mm (Turns 5/16 in), 9mm (Turns 11/32 in), 3/8 in, 10mm, 11mm (Turns 7/16 in), 12mm, 13mm (Turns 1/2 in), 14mm (Turns 9/16 in), 15mm (Turns 16mm, 5/8 in), & Tool Holder, Screw Extractor: 13/16 in, 1/8 in, 11/32 in, 11/64 in, 15/32 in, 19/32 in, 19/64 in, 31/32 in, 7/32 in, 9/16 in

67

Wire Stripper: 8-1/4 in

705

Hex Key 11 PC: 5/64 in, 3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in, 5/16 in, 3/8 in, Hex Key 6 PC: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, Hex Key 13 PC: 3/64 in, 1/16 in, 5/64 in, 3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in, 5/16 in, 3/8 in, SET Hex Key 9 PC:: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm

50

J9969-NA

Nut Driver Fractional: 1/2 in x 2-3/4 in, 1/4 in x 2-3/4 in, 1-1/3 in x 2-3/4 in, 3/16 in x 2-3/4 in, 3/8 in x 2-3/4 in, 5/16 in x 2-3/4 in, 5/8 in x 2-3/4 in, 7/16 in x 2-3/4 in, 7/32 in x 2-3/4 in, 9/16 in x 2-3/4 in, 9/32 in x 2-3/4 in, Nut Driver: 4mm x 4 in, 5mm x 4 in, 5.5mm x 4 in, 6mm x 4 in, 7mm x 4 in, 8mm x 4 in, 9mm x 4 in, 10mm x 4 in, 11mm x 4 in, 12mm x 4 in, 13mm x 4 in, 14mm x 4 in

(4) Blow Molded Box, Folding Knife Sheath, Kit Tool: 3 Pockets, 5 Pockets, (2) 7 Pockets, 8 Pockets, 9 Pockets, (2) Pockets, (2) 11 Pockets, 13 Pockets, 14 Pockets, 26 Pockets, (3) Tool Pouch

Adjustable Reversible Puller Jaw, Blind Bearing Puller, Cap Screw Puller Jaw, (2) Dual Reach Puller Jaw, (2) Forcing Screw Tip, Inside Puller Jaw, Long Narrow Puller Jaw, Prybar Alignment, 18 in, 24 in, Prybar Flat: 12-3/4 in, Prybar Rolling Head: 12 in, 16 in, Puller: 2-Way Yoke, 3-Way Yoke, Puller Jaw Block: 6 Ton, Puller Jaw Reversible: 6 Ton, Puller Blind Bearing, Puller Cape Screw: 3/8"-16 UNC x 3 in, 3/8"-16 UNC x 4 in, 3/8"-24 UNC x 3 in, Puller Crossarm 2 Way: 3/4"-12 ACME, (2) 2/3 Way 5/8"-12 ACME, 3 Way 3/4"-12 ACME, (2) Puller Forcing Screw, Puller Inside Hook Jaw, Puller Jaw Block, Puller Jaw Block Lock, Puller Jaw Long Narrow, Puller Lock Screw, (2) Puller Nut Hex, Puller Pivot Pin, Puller Rod Threader, Puller Screw Cap, (2) Puller Spring Clip, Puller Step Plate: 1 in, 1-1/2 in, 1-1/4 in, 1-1/8 in, 1-3/4 in, 1-3/8 in, 1-5/8 in, 1-7/8 in, 2 in, 2-1/4 in, 2-1/8 in, 2-3/8 in, 3/4 in, 7/8 in, Rear Axle Flange Foot, Reversible Adjustable Puller Nut, Reversible Puller Jaw: 4 in Reach, 6 in Reach, Screwdriver Handle Prybar: 3/4 in, 5/8 in, (2) Separator Plate, Short Slide Rod, Slide Hammer: 2-1/2 lb, 5 lb, Slotted Crossarm Threaded: 5/8"-12 ACME, T-Handle Slide Rod

Hook Pick: 10 in, 10-3/4 in, 10-7/8 in, Oval Inspection Mirror, Puller Pick: 10-3/8 in, Rectangular Telescoping Mirror, Retrieving Tool Telescopic Magnetic

Carbon Scraper: 1 in, 1-1/2 in, Flex Putty Knife: (2) 1-1/4 in

Flashlight, Handheld LED Light

J456646-12RD

Feeler Gauge Set: 0.0015 in, 0.002 in, 0.003 in, 0.004 in, 0.005 in, 0.006 in, 0.007 in, 0.008 in, 0.009 in, 0.010 in, 0.011 in, 0.012 in, 0.013 in, 0.014 in, 0.015 in, 0.016 in, 0.017 in, 0.018 in, 0.020 in, 0.022 in, 0.025 in, 0.030 in, 0.032 in, 0.035 in, 0.040 in, Ignition Feeler Gauge Set: 0.013 in, 0.015 in, 0.017 in, 0.018 in, 0.020 in, 0.025 in, 0.030 in, 0.032 in, 0.035 in, 0.040 in, Tape: 12 ft x 1/2 in, 25 ft x 1-1/4 in, Torpedo Level: 9 in,

Cabinet Round: 1/8 in x 3 in, 1/8 in x 4 in, 1/8 in x 8 in, 3/16 in x 4 in, 3/16 in x 8 in, Jewelers Precision 6 PC:

76 PC Tap and Die Set, Bit Holder: (2) 1/4 in, 8-1/2 in, C-Clamp: 4 in, 6 in, Flaring Tool, Hex Insert Bit:

Ball Pein Hammer: 8 oz, 16 oz, 32 oz, Center Punch: 4-7/8 in, 5-5/8 in, Cold Chisel: 1 in, 1/2 in, 1/4 in, 1-3/16 in, 3/4 in, 3/8 in, 5/16 in, 5/8 in, 7/8 in, Dead Blow Hammer: 15 oz, 21 oz, 28 oz, 56 oz, Drift Punch: 1/4 in, 1/8 in, 3/16 in, Drive Pin Punch: 1/4 in x 6-3/4 in, Hammer Tip 1-1/2 in :, Extra Hard, Hard, Medium Hard, Medium, Soft, Super Soft, Tough, Hammer Tip 2-1/2 in : Extra Hard, Hard, Tough, Medium, Medium Hard, Chisel/Punch Holder, Nonsparking Sledge: 1-1/2 lb, Plastic Mallet, Prick Punch: 5 in, Punch Drive: 3/16 in, 3/32 in, 5/32 in, 7/32 in, Punch Drive Tip: 1/8 in, Soft Face Hammer: 13-1/2 in, 16-1/2 in, Starter Punch: 1/4 in x 6-1/2 in, 1/8 in x 5-1/8 in, 3/16 in x 5-5/8 in, 3/32 in x 5 in, 7/32 in x 6 in

1

Cutting Tools, Deburring and Finishing Tools, Drilling/Extracting/Tapping Tools, Electrical and Telecomm Tools, Hex and Torx Keys, Inspection and Retrieving Tools, Lights, Measuring Tools, Nut Drivers and Nutsetters, Pliers, Prybars and Pullers, Putty Knives and Scrapers, Screwdrivers, Sockets and Accessories, Striking Tools, Wrenches

20

Tool Kits

1

Yes

39

Box