Abrasives
Air Brake
Assortments
Building & Grounds
Chemicals
Cutting & Holemaking Tools
Electrical
Fasteners
Fluid Transfer & Pumps
Furniture & Office Supplies
Hardware
Hose & Hose Ends
HVACR
Hydraulics
Janitorial
Lighting
Material Handling
Paint & Paint Supplies
Pipe, Tubing & Fittings
Plumbing
Pneumatics
Power Transmission
Safety
Steel Equipment & Storage
Tape
Testing & Inspection Tools
Tools
Vehicle & Trailer Parts
Welding
Wheel & TireShare
Share Item
Print
FINISH THOMPSON
Air Operated Drum Pump, Basic Pump with Discharge Hose, For Container Type Drum
Hover over image to magnify
Double tap image to magnify
#936154-2Pkg Qty: 1
$1,778.56 pkg | $1,778.56 ea
Out of Stock
Shipping to 43085
Backordered, expected to arrive by end of May, 2025.
Shipping Restrictions May Apply
This product cannot be shipped to some parts of the United States and Canada.
Acid, base, and solvent pneumatic drum pumps are made with corrosion-resistant materials that withstand a range of acidic and basic chemical concentrations. They are used to dispense and transfer moderate to large volumes of substances and solutions in laboratories and chemical processing plants.
Pkg Qty 1 | Order Qty 1
Technical Specifications
Key Specifications
Adapter Material
Polypropylene
Motor Enclosure
Air
Agency Compliance
NO
Package Quantity
1
Air Inlet Size
1/4 in. MNPT
Power Source
Air
Brand
FINISH THOMPSON
Seal Material
PTFE
Duty Cycle
Continuous
Shipping Weight
20.05 lb.
Food Grade
No
Suction Tube Length
40 in.
Hose Length
48 in.
Variable Speed
Yes
Item
Air Operated Drum Pump
Wetted Materials
Brass, PTFE, Stainless Steel
Mfr. Part Number
DTTS016
General
Air Outlet Size
1/4 in
Max. Air Pressure
100 psi
Compatible Chemicals
Acetic Acid 20%, Acetic Acid 80%, Acetone, Ammonia (Liquids), Ammonium Hydroxide, Anhydrous Ammonia, Antifreeze (Coolant), Automatic Transmission Fluid, Biodiesel, Brake Fluid, Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Citric Acid 50%, Cyclohexane, Deionized Water, Diesel Fuel, E85, Ethyl (Ethanol), Ethyl Acetate, Ethylene Glycol, Formaldehyde, Formaldehyde 40%, Formic Acid, Fresh Water, Gasoline, Glycerin, Heptane, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrazine, Isopropyl (Isopropanol), Kerosene, Lacquer Thinners, Methyl (Methanol), Methyl Ethyl Ketone (MEK), Naphtha, Paint Thinner, Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Stoddard Solvent (Mineral Spirits), Toluene, Trichlorethylene (50%), Turpentine, Windshield Washer Fluid, Xylene
Max. Flow Rate
16 gpm
Discharge Connection Type
Hose Barb
Max. Fluid Temp.
150 Degrees F
Discharge Tube Outlet ID
1 in
Max. Head - Pumps
10 ft
Discharge Tube Outlet OD
1 15/32 in
Max. Head Pressure
4.3 psi
Explosion Proof
Yes
Max. Oil Flow
5 gpm
For Container Size
55 gal
Max. Viscosity
2,000 cps
For Container Type
Drum
Min. Air Pressure
80 psi
For Media Type
Acetic Acid, Ammonia, Ammonium Hydroxide, Antifreeze, Automatic Transmission Fluid, Biodiesel, Calcium Chloride, Chromic Acid, Citric Acid, Cyclohexane, Diesel Fuel, E85, Ethanol, Ethyl Acetate, Ethylene Glycol, Formaldehyde, Formic Acid, Gasoline, Glycerin, Heptane, Hexane, Hydraulic Oil, Hydrazine, Isopropanol, Kerosene, Ketones, Lacquer Thinners, Methanol, Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide, Stoddard Solvent, Toluene, Trichlorethylene, Water, Xylene
Min. Fluid Temp.
-20 Degrees F
Height Above Container
8 1/16 in
Noise Level
78 db
Hose Inside Dia.
1 in
Not Recommended Chemicals
Acetic Acid (Glacial), DEF, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Phosphoric Acid (40% Solution), Sodium Hypochlorite/Bleach (to 20%), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%)
Hose Outside Dia.
1 5/16 in
Pump Connection OD
1 1/2 in
Hose Tube Material
Polyethylene
Pump Package Type
Basic Pump with Discharge Hose
Housing Material - Pumps
Stainless Steel
Suction Tube ID
1 1/2 in
Includes
Motor and Static Kit
Suction Tube Material
316 Stainless Steel
Includes Discharge Hose
Yes
Suction Tube OD
1 1/2 in
Includes Suction Tube
Yes
Product Description
Acid, base, and solvent pneumatic drum pumps are made with corrosion-resistant materials that withstand a range of acidic and basic chemical concentrations. They are used to dispense and transfer moderate to large volumes of substances and solutions in laboratories and chemical processing plants.
Others also viewed
Sorry,
Please contact your Dedicated Account Advisor at 1-800-558-2808 if you need assistance
Shipping Restrictions May Apply
This product cannot be shipped to some parts of the United States and Canada.
Pkg Qty | Order Qty 1
Item Barcode
Air Operated Drum Pump,16 Gpm,
For more product information by email, click here
Compare
You can compare up to three items at a time
Compare
You are already comparing this item.
Alternate Products
No alternate products are currently available.