Share
Print
LIQUIDYNAMICS INC.
Electric Operated Drum Pump, Metered Dispensing with Manual Shut-Off, 115V AC, 1/10 hp Motor HP
Hover over image to magnify
#930170-7 | Pkg Qty: 1
$1,558.79 pkg | $1,558.79 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
ISO
Mfr. Warranty Length
30 Days Manufacturing Defects, 2 yr. Pump
Brand
LIQUIDYNAMICS INC.
Motor Enclosure
IP55
Cord Length
54 in.
Motor RPM
1,750 RPM
DEF Compatible
Yes
Motor Type
2 Pole
Duty Cycle
Intermittent
Nozzle Material
Poly, Stainless Steel
Food Grade
No
Outlet Size
3/4"
For Use On
55 gal. Drums
Package Quantity
1
Full Load Amps
4-1/2
Phase
1
GPM
8
Power Source
Electric
Gasket Material
EPDM
Seal Material
EPDM
Horsepower
1/10
Self-Priming
Yes
Hose Length
12 ft.
Shipping Weight
29 lb.
Hose Material
Peroxide Cured EPDM
Spout Length
3 in.
Housing Material
Polypropylene / EPDM
Spout Material
316 Stainless Steel
Inlet Size
3/4"
Suction Tube Length
48 in.
Item
Electric Operated Drum Pump
Variable Speed
No
Maximum Head
48 ft.
Voltage
115 VAC
Metered
Yes
Wetted Materials
EPDM, Polypropylene, Stainless Steel
Mfr. Part Number
33115-S1MG
pH Range
9.8 to 10
General
Application
Diesel Exhaust Fluid, Anti-Freeze, Clean Water
Includes Suction Tube
Yes
Compatible Chemicals
Acetic Acid 20%, Ammonium Hydroxide, Antifreeze (Coolant), Citric Acid 50%, DEF, Deionized Water, Ethyl (Ethanol), Ethylene Glycol, Formaldehyde, Formaldehyde 40%, Fresh Water, Glycerin, Isopropyl (Isopropanol), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfite, Sodium Hypochlorite/Bleach (to 20%)
Max. Fluid Temp.
104 Degrees F
Diesel Exhaust Fluid Compatible
Yes
Max. Outlet Pressure
23 psi
Discharge Connection Type
Hose Barb
Max. Viscosity
10 cps
Discharge Tube Outlet ID
3/4 in
Min. Fluid Temp.
17 Degrees F
For Container Size
55 gal, 275 gal, 330 gal
Noise Level
70 db
For Container Type
Drum, Tote
Nominal Voltage
110V AC
For Media Type
Acetic Acid, Ammonium Hydroxide, Antifreeze, Bleach, Citric Acid, DEF, Ethanol, Ethylene Glycol, Formaldehyde, Glycerin, Isopropanol, Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfite, Water
Not Recommended Chemicals
Acetic Acid (Glacial), Acetic Acid 80%, Acetone, Ammonia (Liquids), Anhydrous Ammonia, Automatic Transmission Fluid, Biodiesel, Brake Fluid, Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Cyclohexane, Diesel Fuel, E85, Ethyl Acetate, Fertilizers, Formic Acid, Fungicides, Gasoline, Heptane, Herbicides, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrazine, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Kerosene, Lacquer Thinners, Lithium Grease, Methyl (Methanol), Methyl Chloride, Methyl Ethyl Ketone (MEK), Motor Oil, Naphtha, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Paint, Paint Thinner, Pesticides, Phosphoric Acid (40% Solution), Sodium Bisulfate, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%), Toluene, Trichlorethylene (50%), Turpentine, Windshield Washer Fluid, Xylene
For Use With
Anti-Freeze, Clean Water, Diesel Exhaust Fluid
Nozzle Operation
Manual
Frequency (Hz)
60
Pump Connection Type
Hose Barb
Hose Cover Material
Thermal Plastic
Pump Package Type
Metered Dispensing with Manual Shut-Off
Hose Inside Dia.
3/4 in
Rated Voltage
115V AC
Housing Material - Pumps
Polypropylene
Runs Dry
Yes
Includes
Digital Turbine Meter, Nozzle Drip/Holder, Polypropylene Manual Nozzle, Spring loaded SS Drum Mounting Bracket
Spout Connection Type
Integral to Nozzle
Includes Discharge Hose
Yes
Spout Discharge Size
3/4 in
Includes Nozzle
Yes
Standards
CE, IP 55, ISO 22241
Includes Spout
Yes
Suction Tube ID
3/4 in
Product Description
Diesel exhaust fluid (DEF) stationary electric drum pumps are used specifically with DEF to maintain purity when filling the reservoir of a diesel engine's Selective Catalytic Reduction (SCR) system. These pumps are certified to ISO standards that regulate the handling, transportation, and storage of DEF. They are used for dispensing and transferring moderate to large volumes of DEF when servicing late model trucks and SUVs as well as SCR-based stationary industrial systems that operate on diesel fuel.
Item Barcode
Drum Topper System,115VAC,1/10
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 45NA85 | Drum Topper System, |
 | UNSPSC CODES | 40151529 | |
 | VMRS (ATA) CODES | 053-006-009 | Drum Topper System, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here