Share
Print
LIQUIDYNAMICS INC.
Electric Operated Drum Pump, Metered Dispensing with Automatic Shut-Off, 12V DC, 1/10 hp Motor HP
Hover over image to magnify
#929420-2 | Pkg Qty: 1
$1,833.34 pkg | $1,833.34 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
ISO
Motor Type
2 Pole
Brand
LIQUIDYNAMICS INC.
Nozzle Material
Stainless Steel
Cord Length
18 ft.
Outlet Size
3/4"
DEF Compatible
Yes
Package Quantity
1
Duty Cycle
Intermittent
Phase
1
Food Grade
No
Plug Type
Spring Clamp
For Use On
55 gal. Drums
Power Source
Electric
Full Load Amps
22
RPM
1730
GPM
8
Seal Material
EPDM
Gasket Material
EPDM
Self-Priming
Yes
Hose Length
12 ft.
Shipping Weight
26.8 lb.
Inlet Size
3/4"
Spout Length
6 in.
Item
Electric Operated Drum Pump
Spout Material
316 Stainless Steel
Maximum Head
48 ft.
Suction Tube Length
48 in.
Metered
Yes
Variable Speed
No
Mfr. Part Number
33115-S2AG
Voltage
12 VDC
Mfr. Warranty Length
30 Days Manufacturing Defects, 2 yr. Pump
Wetted Materials
EPDM, Polypropylene, Stainless Steel
Motor Enclosure
IP55
pH Range
9.8 to 10
Motor RPM
2,600 RPM
General
Application
Diesel Exhaust Fluid, Anti-Freeze, Clean Water
Max. Head - Pumps
48 ft
Compatible Chemicals
Acetic Acid 20%, Ammonium Hydroxide, Antifreeze (Coolant), Citric Acid 50%, DEF, Deionized Water, Ethyl (Ethanol), Ethylene Glycol, Formaldehyde, Formaldehyde 40%, Fresh Water, Glycerin, Isopropyl (Isopropanol), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfite, Sodium Hypochlorite/Bleach (to 20%)
Max. Head Pressure
23 psi
Diesel Exhaust Fluid Compatible
Yes
Max. Oil Flow
8 gpm
Discharge Connection Type
Hose Barb
Max. Outlet Pressure
23 psi
Discharge Tube Outlet ID
3/4 in
Max. Viscosity
10 cps
Discharge Tube Outlet OD
1 in
Min. Fluid Temp.
17 Degrees F
For Container Size
55 gal, 275 gal, 330 gal
Noise Level
70 db
For Container Type
Drum, Tote
Nominal Voltage
12V DC
For Media Type
Acetic Acid, Ammonium Hydroxide, Antifreeze, Bleach, Citric Acid, DEF, Ethanol, Ethylene Glycol, Formaldehyde, Glycerin, Isopropanol, Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfite, Water
Not Recommended Chemicals
Acetic Acid (Glacial), Acetic Acid 80%, Acetone, Ammonia (Liquids), Anhydrous Ammonia, Automatic Transmission Fluid, Biodiesel, Brake Fluid, Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Cyclohexane, Diesel Fuel, E85, Ethyl Acetate, Fertilizers, Formic Acid, Fungicides, Gasoline, Heptane, Herbicides, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrazine, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Kerosene, Lacquer Thinners, Lithium Grease, Methyl (Methanol), Methyl Chloride, Methyl Ethyl Ketone (MEK), Motor Oil, Naphtha, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Paint, Paint Thinner, Pesticides, Phosphoric Acid (40% Solution), Sodium Bisulfate, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%), Toluene, Trichlorethylene (50%), Turpentine, Windshield Washer Fluid, Xylene
For Use With
Anti-Freeze, Clean Water, Diesel Exhaust Fluid
Nozzle Operation
Automatic
Height Above Container
12 in
Number of Phases
1
Hose Cover Material
Thermal Plastic
Pump Connection OD
1 in
Hose Inside Dia.
3/4 in
Pump Connection Type
Hose Barb
Hose Outside Dia.
1 in
Pump Package Type
Metered Dispensing with Automatic Shut-Off
Hose Tube Material
EPDM
Rated Voltage
12V DC
Housing Material - Pumps
Polypropylene
Runs Dry
Yes
Includes
Digital Turbine Meter, Nozzle Drip/Holder, Spring loaded SS Drum Mounting Bracket, SS Automatic Nozzle
Spout Connection Type
Integral to Nozzle
Includes Discharge Hose
Yes
Spout Discharge Size
3/4 in
Includes Nozzle
Yes
Standards
CE, IP 55, ISO 22241
Includes Spout
Yes
Suction Tube ID
3/4 in
Includes Suction Tube
Yes
Suction Tube Material
EPDM
Max. Flow Rate
8 gpm
Suction Tube OD
1 in
Max. Fluid Temp.
104 Degrees F
Product Description
Diesel exhaust fluid (DEF) stationary electric drum pumps are used specifically with DEF to maintain purity when filling the reservoir of a diesel engine's Selective Catalytic Reduction (SCR) system. These pumps are certified to ISO standards that regulate the handling, transportation, and storage of DEF. They are used for dispensing and transferring moderate to large volumes of DEF when servicing late model trucks and SUVs as well as SCR-based stationary industrial systems that operate on diesel fuel.
Item Barcode
Drum Topper System,12VDC,
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 45NA86 | Drum Topper System,12VDC, |
 | UNSPSC CODES | 40151529 | |
 | VMRS (ATA) CODES | 053-006-009 | Drum Topper System,12VDC, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here