Share
Print
DAYTON
Sump Pump, 1/2 HP, Amps 6.00, Flow Rate at 10 Ft. of Head 72.0 gpm
Hover over image to magnify
#927436-3 | Pkg Qty: 1
$952.91 pkg | $952.91 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
cCSAus
Maximum Diameter Solids
3/4 in.
Amps
6.0 A
Maximum Head
20-1/2 ft.
Amps AC
9
Maximum Liquid Temperature
200°F
Base Material
Zinc-Plated Steel
Mfr. Part Number
5URJ5
Bearing Material
Carbon
Minimum Sump Pit Diameter
18 in.
Bearing Type
Sleeve
Motor Enclosure
TEFC
Brand
DAYTON
Motor Housing
Aluminum
Cord Length
8 ft.
Motor RPM
1725
Cord Size
16/3
Motor Type
PSC
Cord Type
SJT
Off Point
4
Diameter
13
On Point
11
Discharge NPT
2 in. F
Outlet
2
Duty
Continuous
Package Quantity
1
Float Material
Stainless Steel
Phase
1
GPM of Water @ 10 Ft. of Head
72
Pump Body Material
Cast Iron
GPM of Water @ 15 Ft. of Head
39
Pump HP
1/2
GPM of Water @ 20 Ft. of Head
2
Pump Type
Commercial/Industrial
GPM of Water @ 5 Ft. of Head
103
RPM
1725
Height
43 in.
Shipping Weight
45.38 lb.
Horsepower
1/2
Sump Pump Item
Upright Sump Pump
Housing Material
Cast Iron
Switch
Float with Rod and Stops
Hz
60
Switch Type
Vertical
Impeller Material
Cast Iron
Thermal Protection
Automatic
Input Phase AC
1
Type
Commercial/Industrial
Insulation Class
B
Voltage
120 VAC
Item
Upright Sump Pump
Volute Material
Cast Iron
General
Application
For Pumping Clear Water Or Effluent from Wet Pits, Loading Docks, Boiler Dump Pits, Below Ground Vaults, Elevator Pits and Other Residential, Commercial And Industrial Applications, for Hot Water Applications Up to 200 Degrees Fahrenheit
Flow Rate @ 5 Ft. of Head
103.0 gpm
Base to Motor Height
33
For Use With
Nonflammable Liquids Compatible with Pump Materials of Construction
Basin Dia.
33 in
HP
1/2 hp
Body Dia.
13 in
Includes
Manual
Column Material
Stainless Steel
Max. Liquid Temp.
200 Degrees F
Discharge Dia.
2 in
Min. Sump Pit Dia.
18 in
Discharge Gender
Female
Nominal Voltage
110V AC
Discharge Standard
NPT
Phase - Pumps
1
Features
An Automatic Float Type Switch, Double Shielded Ball Bearings at Both Ends
Pump Base
Zinc Plated Steel
Flow Rate @ 10 Ft. of Head
72.0 gpm
Rated Voltage
120V AC
Flow Rate @ 15 Ft. of Head
39.0 gpm
Switch Actuation
Vertical Float
Flow Rate @ 20 Ft. of Head
2.0 gpm
Switch Electrical Connection
Integral
Product Description
These pedestal sump pumps have a cast-iron body that efficiently disperses heat as the pump is draining water from basement sump pits. They are for use in smaller-diameter sump pits that cannot accommodate submersible sump pumps.
Expertly Selected Product Pairings
Item Barcode
Upright Sump Pump, 1/2 Hp
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 5URJ5 | Upright Sump Pump, 1/2 HP |
 | UNSPSC CODES | 40151512 | |
 | VMRS (ATA) CODES | 053-006-009 | Upright Sump Pump, 1/2 HP |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here