Share
Print
DAYTON
Effluent Pump, HP 1, 240 VAC, Intermittent Duty Cycle, Max. Head 109.0 ft.
#927092-7 | Pkg Qty: 1
$1,455.85 pkg | $1,455.85 ea
This item requires special shipping, additional charges may apply.
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Amps
8.3 A
Hz
60
Base Material
Cast Iron
Impeller Material
Polypropylene
Brand
DAYTON
Input Phase AC
1
Cord Length
20 ft.
Item
Submersible Effluent Pump
Diameter
12-3/16 in.
Length
16-3/4 in.
Discharge NPT
2 in.
Maximum Diameter Solids
3/4 in.
Duty
Intermittent
Maximum Head
109 ft.
GPM of Water @ 10 Ft. of Head
85
Maximum Liquid Temperature
104°F
GPM of Water @ 100 Ft. of Head
12
Maximum Temperature (Deg. F)
104
GPM of Water @ 15 Ft. of Head
83
Mechanical Seal
SiC/Buna
GPM of Water @ 20 Ft. of Head
80
Mfr. Part Number
3BB85
GPM of Water @ 25 Ft. of Head
78
Minimum Sump Pit Diameter
18 in.
GPM of Water @ 30 Ft. of Head
74
Operation Type
Automatic
GPM of Water @ 35 Ft. of Head
71
Package Quantity
1
GPM of Water @ 40 Ft. of Head
68
Phase
1
GPM of Water @ 45 Ft. of Head
64
Pump Body Material
Cast Iron
GPM of Water @ 5 Ft. of Head
86
Pump HP
1
GPM of Water @ 50 Ft. of Head
60
Pump RPM
3450
GPM of Water @ 55 Ft. of Head
56
Pump Type
Automatic Operation (Switch Included)
GPM of Water @ 60 Ft. of Head
52
Shaft Material
Silicon Carbide/Buna N
GPM of Water @ 70 Ft. of Head
44
Shaft Seal
Silicon Carbide/Buna N
GPM of Water @ 80 Ft. of Head
34
Shaft Seal Material
Buna-N, Silicon Carbide
GPM of Water @ 90 Ft. of Head
22
Shipping Weight
81 lb.
Handle
Yes
Switch Type
Tether
Height
16-3/4 in.
Top Material
Cast Iron
Horsepower
1
Type
Automatic Operation (Switch Included)
Housing
Cast Iron
Voltage
240 VAC
Housing Material
Cast Iron
Width
12-3/16 in.
General
Body Dia.
12 3/16 in
Min. Sump Pit Dia.
18 in
Discharge Dia.
2 in
Minimum Water Depth
18 in
Flow Rate @ 10 Ft. of Head
85 gpm
Nominal Voltage
220V AC
Flow Rate @ 100 Ft. of Head
12 gpm
Phase - Pumps
1
Flow Rate @ 15 Ft. of Head
83 gpm
Rated Voltage
240V AC
Flow Rate @ 20 Ft. of Head
80 gpm
Shaft Seal Material - Pumps
Nitrile Rubber, Silicon Carbide
Flow Rate @ 40 Ft. of Head
68 gpm
Switch Actuation
Tether Float
Flow Rate @ 60 Ft. of Head
52 gpm
Switch Electrical Connection
Piggyback
Flow Rate @ 80 Ft. of Head
34 gpm
Width at Widest Point
12 3/16 in
HP
1
Product Description
These single-phase 200 to 240V effluent pumps use a higher voltage that allows for larger motors that require less current than lower-voltage motors. They are used to drain treated water containing small solids from septic tanks and out to a drain field.
Expertly Selected Product Pairings
$51.41 pkg | $51.41 ea
$20.72 pkg | $20.72 ea
$106.06 pkg | $106.06 ea
$37.07 pkg | $37.07 ea
$2.77 pkg | $2.77 ea
$983.64 pkg | $983.64 ea
$2.22 pkg | $2.22 ea
$263.30 pkg | $263.30 ea
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Pump,Effluent,1hp
Name | Item | Description | |
---|---|---|---|
Grainger Dropship | 3BB85 | Pump, Effluent,1hp | |
UNSPSC CODES | 40151512 | ||
VMRS (ATA) CODES | 053-006-009 | Pump, Effluent,1hp |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here