Share
Print
DAYTON
Effluent Pump, HP 1/2, 120 VAC, Intermittent Duty Cycle, Max. Head 79.0 ft.
Hover over image to magnify
#927038-1 | Pkg Qty: 1
$1,140.68 pkg | $1,140.68 ea
This item requires special shipping, additional charges may apply.
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Amps
11.9 A
Input Phase AC
1
Base Material
Cast Iron
Item
Submersible Effluent Pump
Bearing Type
Ball
Length
16-3/4 in.
Brand
DAYTON
Maximum Diameter Solids
3/4 in.
Cord Length
20 in.
Maximum Head
79 ft.
Diameter
12-3/16 in.
Maximum Liquid Temperature
104°F
Discharge NPT
2 in.
Maximum Temperature (Deg. F)
104
Duty
Intermittent
Mechanical Seal
SiC/Buna
GPM of Water @ 10 Ft. of Head
76
Mfr. Part Number
4HU75
GPM of Water @ 15 Ft. of Head
70
Minimum Sump Pit Diameter
18 in.
GPM of Water @ 20 Ft. of Head
66
Motor RPM
3450
GPM of Water @ 25 Ft. of Head
61
Motor Type
Oil Filled PSC
GPM of Water @ 30 Ft. of Head
56
Operation Type
Manual
GPM of Water @ 35 Ft. of Head
51
Package Quantity
1
GPM of Water @ 40 Ft. of Head
47
Phase
1
GPM of Water @ 45 Ft. of Head
62
Pump Body Material
Cast Iron
GPM of Water @ 5 Ft. of Head
79
Pump HP
1/2
GPM of Water @ 50 Ft. of Head
36
Pump RPM
3450
GPM of Water @ 55 Ft. of Head
56
Pump Type
Manual Operation (Switch Not Included)
GPM of Water @ 60 Ft. of Head
25
RPM
3450
GPM of Water @ 70 Ft. of Head
12
Shaft Seal
Silicon Carbide/Buna N
Handle
Yes
Shaft Seal Material
Buna-N, Silicon Carbide
Height
16-3/4 in.
Shipping Weight
77.95 lb.
Horsepower
1/2
Switch Type
None
Housing
Cast Iron
Top Material
Cast Iron
Housing Material
Cast Iron
Type
Manual Operation (Switch Not Included)
Hz
60
Voltage
120 VAC
Impeller Material
Polypropylene
Width
12-1/6 in.
General
Body Dia.
12 3/16 in
Minimum Water Depth
18 in
Discharge Dia.
2 in
Nominal Voltage
110V AC
Flow Rate @ 10 Ft. of Head
76 gpm
Phase - Pumps
1
Flow Rate @ 15 Ft. of Head
70 gpm
Rated Voltage
120V AC
Flow Rate @ 20 Ft. of Head
66 gpm
Shaft Seal Material - Pumps
Nitrile Rubber, Silicon Carbide
Flow Rate @ 40 Ft. of Head
47 gpm
Switch Actuation
No Switch Included
Flow Rate @ 60 Ft. of Head
25 gpm
Switch Electrical Connection
No Switch Included
Min. Sump Pit Dia.
18 in
Width at Widest Point
12 1/6 in
Product Description
These 110 to 120V effluent pumps are used to drain treated water containing small solids from septic tanks and out to a drain field. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
Expertly Selected Product Pairings
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Pump,Effluent,1/2 Hp
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 4HU75 | Pump, Effluent,1/2 |
 | UNSPSC CODES | 40151512 | |
 | VMRS (ATA) CODES | 053-006-009 | Pump, Effluent,1/2 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here