Share
Print
DAYTON
120/240 VAC Booster Pump, 1-Phase, 27 PSI Max. Pressure, 1-1/2" NPT Inlet Size
Hover over image to magnify
#927037-9 | Pkg Qty: 1
$543.51 pkg | $543.51 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
cULus
Mfr. Part Number
45MW11
Amps
7.5/3.4 A
Mfr. Warranty Length
1 yr.
Bearing Type
Double Sealed
Motor Ambient Temperature Rating
65°C
Best Efficiency GPM @ Head
33 @ 44 ft.
Motor Enclosure
ODP
Brand
DAYTON
Motor RPM
3450
Duty
Continuous
Motor Type
CSCR
Frame
56J
NEMA/IEC Frame
56J
GPM @ 20 PSI
28
Number of Stages
1
GPM @ 25 PSI
20
Outlet
1-1/4 in.
Height
8-3/4 in.
Outlet Size
1-1/4 in. NPT
Horsepower
1/3
Package Quantity
1
Housing Material
Cast Iron
Phase
1
Hz
60
Seal Material
Stainless Steel, Buna, Carbon/Silicon Carbide
Impeller Material
Stainless Steel
Seal Type
Mechanical
Impeller Type
Closed
Shaft Material
Stainless Steel
Inlet
1-1/2 in.
Shipping Weight
43 lb.
Item
Booster Pump
Stages
1
Length
15-1/8 in.
Suction Lift
25 ft.
Maximum Case Pressure
100 psi
Type
Booster
Maximum Fluid Viscosity
31 SSU
Voltage
120/240 VAC
Maximum Inlet Pressure
73
Wetted Materials
Cast Iron, Stainless Steel, Buna N, Carbon, Ceramic
Maximum Pressure
27 psi
Width
6-1/2 in.
Maximum Working Pressure
27
General
Application
Pressure Boosting, Pressure Cleaning, Spray or Mist Systems, Reverse Osmosis, Water Circulation
Maximum GPM @ PSI
38 @ 15
Best Efficiency GPM @ PSI
33 @ 19
Maximum Media Temperature
200 Degrees F
Best Efficiency Pressure
19 psi
Maximum PSI Boost @ 2-10 GPM
26
Booster Pump Type
Booster Pump
Maximum PSI Boost @ 20 GPM
22
Case Pressure (Maximum)
100 psi
Maximum PSI Boost @ 30 GPM
18
Compatible Discharge Pipe Size
1 1/4 in
Minimum GPM @ PSI
20 @ 25
Compatible Intake Pipe Size
1 1/2 in
Minimum Inlet Flow Required
2 GPM
Compatible with Media Type
Water
Motor Ambient Temperature (Maximum)
149 Degrees F
Discharge Rotation
90 Degrees
Motor Ambient Temperature (Minimum)
65 Degrees F
Discharge Type
NPT
Motor Enclosure Type
ODP
Flow Rate @ 15 psi
38 gpm
Motor Frame Designation
56J NEMA
Flow Rate @ 20 psi
28 gpm
Mounting Orientation
Horizontal
For Use With
Nonflammable Liquids Compatible with Pump Component Materials
Nameplate Voltage
115/230V AC
For Use With Systems
Non-Potable
Nominal Voltage
115/230V AC
GPM @ 15 PSI
38
Pressure Boost (Maximum)
26 psi
Impeller Design
Closed
Priming
Manual
Includes
Manual
Pump Housing Material
Cast Iron
Intake Size
1 1/2 in
Pumping Application
General Service in Farm, Liquid Transfer, Pressure Boosting, Water Supply
Intake Type
NPT
Shut Off Pressure (Maximum)
27 psi
Intake and Discharge Size
1 1/2 in , 1 1/4 in
Suction Lift (Maximum)
25 ft
Manufacturer Warranty Length
1 yr
Wetted Material
Buna-N, Carbon, Cast Iron, Ceramic, Stainless Steel
Product Description
This Dayton® pressure booster pump is non-self-priming and can lift water up to 25 ft. with foot valve and pump suction line/piping filled with water. Continuous-duty motor can boost pressure for high-flow applications. Includes a discharge port on the pump housing that can be adjusted 90°.
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Booster Pump,1/3 Hp,1Ph,120/
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 45MW11 | Booster Pump, 1/3 HP,1Ph, |
 | UNSPSC CODES | 40151503 | |
 | VMRS (ATA) CODES | 053-006-009 | Booster Pump, 1/3 HP,1Ph, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here