Home All Products Fluid Transfer & Pumps Water Pumps Sewage Pumps, Systems & Accessories Submersible Sewage Pumps SKU: 926164-6
Share  
Print  
DAYTON

2 HP Automatic Submersible Sewage Pump, 230 Voltage, 335 GPM of Water @ 15 Ft. of Head

Hover over image to magnify
Submersible Sewage Pump,2 Hp
PI_Asset_958669
PI_Asset_958670
Submersible Sewage Pump,2 Hp
PI_Asset_958669
PI_Asset_958670

#926164-6 | Pkg Qty: 1

$1,911.65 pkg | $1,911.65 ea
This item requires special shipping, additional charges may apply.

Drop Ship Item

Shipping to 60045
|

Technical Specifications

Key Specifications
Agency Compliance
CSA
Maximum Head
46.5 ft.
Amps
19 A
Maximum Liquid Temperature
104°F
Base Material
303 Stainless Steel
Maximum Temperature (Deg. F)
104
Bearing Type
Ball
Mfr. Part Number
4LE23
Brand
DAYTON
Motor RPM
1750
Cord Length
25 ft.
Motor Type
PSC
Diameter
16-23/32 in.
Off Point
14.35
Discharge NPT
3 in.
On Point
23.35
GPM of Water @ 10 Ft. of Head
375
Package Quantity
1
GPM of Water @ 15 Ft. of Head
335
Phase
1
GPM of Water @ 20 Ft. of Head
290
Pump Body Material
Cast Iron
GPM of Water @ 25 Ft. of Head
250
Pump HP
2
GPM of Water @ 30 Ft. of Head
200
Pump Type
Automatic
GPM of Water @ 40 Ft. of Head
85
RPM
1750
GPM of Water @ 5 Ft. of Head
405
Shaft Material
SiC
Height
21-1/4 in.
Shaft Seal
Silicon Carbide
Horsepower
2
Shaft Seal Material
Carbon Ceramic
Housing
Cast Iron
Shipping Weight
132 lb.
Housing Material
Cast Iron
Switch Type
Tether
Impeller Material
Cast Iron
Thermal Protection
Auto
Input Phase AC
1
Top Material
Cast Iron
Item
Submersible Sewage Pump
Type
Automatic
Maximum Diameter Solids
2-1/2 in.
Voltage
240 VAC
General
Body Dia.
16 23/32 in
Nominal Voltage
220V AC
Discharge Dia.
3 in
Phase - Pumps
1
Discharge Standard
NPT
Rated Voltage
240V AC
Flow Rate @ 10 Ft. of Head
375 gpm
Shaft Seal Material - Pumps
Carbon Ceramic
Flow Rate @ 15 Ft. of Head
335 gpm
Standards
CSA
Flow Rate @ 20 Ft. of Head
290 gpm
Switch Actuation
Tether Float
Flow Rate @ 40 Ft. of Head
85 gpm
Switch Electrical Connection
Integral
HP
2

Product Description

These general purpose single-phase 200 to 240V sewage ejector pumps use a higher voltage that allows for larger motors that require less current than lower-voltage motors. They remove sewage containing solids from drains where a gravity system won't work, such as in septic systems that are below the main sewer line. They are compatible with most 240V U.S. wall outlets.

Expertly Selected Product Pairings

Extension Cord, 100' 12 Gauge
$152.05 pkg | $152.05 ea
Item: 910929-3 | Pkg Qty: 1
Check Valve 1 1/2"
$26.04 pkg | $26.04 ea
Item: 910956-1 | Pkg Qty: 1
Sewage Basin,Inlet 4 In,65 Gal.
$489.04 pkg | $489.04 ea
Item: 912680-7 | Pkg Qty: 1
Check Valve,2 In,Slipxslip,PVC
$51.41 pkg | $51.41 ea
Item: 912791-2 | Pkg Qty: 1
Extension Cord,50ft
$79.49 pkg | $79.49 ea
Item: 914087 | Pkg Qty: 1
Float Switch
$283.47 pkg | $283.47 ea
Item: 928385-2 | Pkg Qty: 1

Compliance & Restrictions

California Proposition 65 Icon
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
9261646
Submersible Sewage Pump,2 Hp
 NameItemDescription
Grainger DropshipGrainger Dropship4LE23Submersible Sewage Pump,
UNSPSC CODESUNSPSC CODES40151517
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Submersible Sewage Pump,

For more product information by email, click here