Share
Print
DAYTON
1-1/2-HP Self Priming Centrifugal Pump, 96 ft. Max. Head, 1/8" Max. Dia. Solids, Cast Iron
Hover over image to magnify
#925581-5 | Pkg Qty: 1
$721.10 pkg | $721.10 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
c UL us
Maximum Head
96 ft.
Amps
17.0/9.0-8.5 A
Maximum Liquid Temperature
200°F
Bearing Type
Ball
Maximum Pressure
41.5 psi
Best Efficiency GPM @ Head
49 gpm @ 72 ft.
Maximum Specific Gravity
1
Best Efficiency Range GPM @ Head
41 to 67 gpm @ 80 to 56 ft.
Mfr. Part Number
4UA71
Brand
DAYTON
Mfr. Warranty Length
1 yr.
Drain Plug
Easily Accessible
Minimum GPM @ Head
20 gpm @ 90 ft.
Duty
Continuous
Motor Design
Capacitor-Start
Frame
56J
Motor Enclosure
ODP
GPM of Water @ 10 Ft. of Head
88
Motor RPM
3500
GPM of Water @ 15 Ft. of Head
85
Motor Type
Single Phase
GPM of Water @ 20 Ft. of Head
82
NEMA/IEC Frame
56J
GPM of Water @ 25 Ft. of Head
80
Outlet
1-1/2 in. NPT
GPM of Water @ 30 Ft. of Head
78
Outlet Size
1-1/2 in. NPT
GPM of Water @ 40 Ft. of Head
74
Pack Quantity
1
GPM of Water @ 50 Ft. of Head
70
Phase
1
GPM of Water @ 60 Ft. of Head
63
Port Rotation
No
GPM of Water @ 70 Ft. of Head
55
RPM
3450
GPM of Water @ 80 Ft. of Head
41
Screw Material
Zinc Plated
GPM of Water @ 90 Ft. of Head
16
Seal Application
Non-Flammable and Non-Abrasive Liquids Compatible with Seal Component Materials Up to 180° F
Height
9-1/8 in.
Seal Material
Carbon Ceramic-Buna N
Horsepower
1-1/2
Seal Type
Mechanical
Housing Material
Cast Iron
Self-Priming
Yes
Hz
60
Service Factor
1.3
Impeller Material
Cast Iron
Shaft Material
Stainless Steel
Impeller Type
Semi Open
Shipping Weight
65.05 lb.
Inlet
1-1/2 in. NPT
Suction Lift
20 ft.
Inlet Pressure
100 psi
Type
Self Priming
Item
Centrifugal Pump
Voltage
115/208 to 230 VAC
Maximum Case Pressure
165 psi
Volute Material
Cast Iron
Maximum Diameter Solids
1/8 in.
Wetted Materials
Cast Iron, Buna N, Carbon, Ceramic
Maximum Fluid Viscosity
100 SSU
Width
6-7/8 in.
Maximum GPM @ Head
68 gpm @ 10 ft.
General
Application
For High-Volume Industrial and Commercial Applications Including Liquid and Chemical Transfer, Irrigation, Dewatering, and Processing Application
Impeller Design
Semi-Open
Best Efficiency Head
56 to 80 ft
Includes
Manual
Discharge Type
NPT
Intake Type
NPT
Flow Rate @ 10 ft of Head (Maximum)
68 gpm
Maximum Feet of Head
96 ft
Flow Rate @ 15 ft of Head (Maximum)
66 gpm
Minimum Media Temperature
40 Degrees F
Flow Rate @ 20 ft of Head (Maximum)
65 gpm
Nominal Voltage
115/208-230V AC
Flow Rate @ 40 ft of Head (Maximum)
62 gpm
Solid Diameter (Maximum)
0.13 in
Flow Rate @ 60 ft of Head (Maximum)
57 gpm
Suction Lift (Maximum)
20 ft
Flow Rate @ 80 ft of Head (Maximum)
40 gpm
Wetted Material
Buna-N, Carbon, Cast Iron, Ceramic
For Use With
Non-Flammable/Non-Abrasive Liquids, Compatible with Pump Material
Product Description
Dayton self-priming centrifugal pumps are close-coupled to continuous duty motors and designed to provide high volume service for industrial and commercial applications. These applications include process applications, for nonflammable liquids compatible with pump component materials, liquid and chemical transfer, dewatering, irrigation, and decorative water features.
Expertly Selected Product Pairings
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Pump,Cast Iron,1-1/2hp
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 4UA71 | Pump,Cast Iron,1-1/2hp |
 | UNSPSC CODES | 40151503 | |
 | VMRS (ATA) CODES | 053-006-009 | Pump,Cast Iron,1-1/2hp |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here