Share  
Print  
DAYTON

120/240 VAC Totally Enclosed Fan-Cooled Centrifugal Pump, 1-Phase, 1-1/2" NPT Inlet Size

Hover over image to magnify
Pump,2 Hp,1 Ph,120/240VAC
Pump,2 Hp,1 Ph,120/240VAC

#925563-6 | Pkg Qty: 1

$1,166.57 pkg | $1,166.57 ea
This item requires special shipping, additional charges may apply.

Drop Ship Item

Shipping to 60045
|

Technical Specifications

Key Specifications
Agency Compliance
UL Approval in Motor
Maximum Diameter Solids
5/16 in.
Amps
16.6/8.3 A
Maximum Fluid Viscosity
100 SSU
Bearing Type
Ball
Maximum Head
110 ft.
Best Efficiency GPM @ Head
54 @ 70 ft.
Maximum Liquid Temperature
200° F
Brand
DAYTON
Maximum Pressure
47 psi
Drain Plug
Easily Accessible
Maximum Specific Gravity
1
Duty
Continuous
Mfr. Part Number
2ZXJ9
Duty Cycle
Continuous
Mfr. Warranty Length
1 yr.
Frame
56J
Minimum GPM @ Head
32 gpm @ 90 ft.
GPM of Water @ 10 Ft. of Head
94
Motor Enclosure
TEFC
GPM of Water @ 15 Ft. of Head
92
Motor RPM
3450
GPM of Water @ 20 Ft. of Head
90
Motor Type
TEFC
GPM of Water @ 25 Ft. of Head
87
NEMA/IEC Frame
56J
GPM of Water @ 30 Ft. of Head
85
Number of Port Positions
4
GPM of Water @ 40 Ft. of Head
78
Outlet
1-1/4 in.
GPM of Water @ 50 Ft. of Head
71
Outlet Size
1-1/4 in. NPT
GPM of Water @ 60 Ft. of Head
62
Package Quantity
1
GPM of Water @ 70 Ft. of Head
54
Phase
1
GPM of Water @ 80 Ft. of Head
43
Port Rotation
4 Position Increments
GPM of Water @ 90 Ft. of Head
32
Screw Material
Zinc Plated
Height
9 in.
Seal Application
Long life When Not Run Dry or Pumping Abrasives
Horsepower
2
Seal Material
Viton
Housing Material
Cast Iron
Seal Type
Mechanical Carbon on Ceramic
Hz
60
Service Factor
1.2
Impeller Material
Cast-Iron
Shaft Material
Stainless Steel
Impeller Type
Closed
Shipping Weight
73.08 lb.
Inlet
1-1/2 in.
Type
High Head
Inlet Pressure
200 psi
Voltage
120/240 VAC
Item
Straight Centrifugal High Head Pump
Volute Material
Cast Iron
Length
17 in.
Wetted Materials
Cast Iron, Viton, Carbon, Ceramic, SS
Maximum Case Pressure
200 psi
Width
8-3/4 in.
General
Application
Rugged Close-Coupled Pumps Continuously Produce High Head Condition
Intake Type
NPT
Best Efficiency Head
70 ft
Maximum Media Temperature
200 Degrees F
Compatible with Media Type
Non-Flammable Liquids
Nominal Voltage
115/230V AC
Discharge Type
NPT
Pumping Application
Aggressive Liquid Applications and Other General Purpose Pumping, Boiler Feed, Boosters, Chemical Processing, Condensate Return, Cooling Towers, Filtration, Fountains, General Transfer, Irrigation, Jockey Pump Service, Marine Applications, Spraying Systems, Utility, Water Circulation
Feet of Head (Minimum)
10 ft
Solid Diameter (Maximum)
0.31 in
For Use With
Nonflammable and Nonabrasive Liquids
Wetted Material
Carbon, Cast Iron, Ceramic, Stainless Steel, Viton
Includes
Manual

Product Description

Dayton close-coupled units pump continuously, producing high flow rates under low-head conditions. Designed for continuous low-pressure circulation and transfer of nonflammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fountains, boosters, water circulation, irrigation, spraying systems, jockey pump service, chemical processing, aggressive liquid applications, and other general purpose pumping compatible with pump component materials where no suction lift or self priming is required.

Expertly Selected Product Pairings

Galv Long Nipple 1-1/4X2
$5.81 pkg | $5.81 ea
Item: 916389-8 | Pkg Qty: 1
Nipple,1-1/2 In.,2 In.,Galv
$7.08 pkg | $7.08 ea
Item: 919490-7 | Pkg Qty: 1

Compliance & Restrictions

California Proposition 65 Icon
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Documents

Item Barcode
9255636
Pump,2 Hp,1 Ph,120/240VAC
 NameItemDescription
Grainger DropshipGrainger Dropship2ZXJ9Pump,2 HP,1 Ph,120/240VAC
UNSPSC CODESUNSPSC CODES40151503
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Pump,2 HP,1 Ph,120/240VAC

For more product information by email, click here