Share
Print
DAYTON
Dayton Tubeaxial Fan: Clean Air, 16 in Blade, 46 sones Max Noise Level @ 5 Feet, Belt Drive
Hover over image to magnify
#925545-6 | Pkg Qty: 1
$1,203.23 pkg | $1,203.23 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Blade Diameter
16 in.
Mounting Position
Vertical/Horizontal
Blade Material
Aluminum
Number of Blades
6
Brand
DAYTON
Package Quantity
1
Height
28-5/16 in.
Shipping Weight
52.15 lb.
Item
Tubeaxial Fan
Width
18-1/2 in.
Mfr. Part Number
166204A
General
Assembly
Fully Assembled
Maximum Inlet Air Temperature
200 Degrees F
Body Diameter
16 1/8 in
Maximum Motor Horsepower
1 hp
Bolt Circle Diameter
17 1/2 in
Maximum Motor Speed
2,547 RPM
Brake Horsepower
1 hp
Maximum Noise Level @ 5 Feet
46 sones
Center Height
11 1/2 in
Maximum Static Pressure
1 in wc
Compatible Flange Part Number
4C717
Minimum Airflow
2,379 cfm
For Air Type
Clean Air
Minimum Motor Horsepower
33/100 hp
For Airflow (Dependent on Motor)
2,379 cfm to 3,859 cfm
Minimum Motor Speed
1,570 RPM
For Fan Speed (Motor Sold Separately)
1,570 RPM to 2,547 RPM
Propeller Shaft Diameter
7/8 in
For Motor Horsepower (Motor Sold Separately)
33/100 hp to 1 hp
Replacement Fan Blade Part Number
4C663
Includes
Belt Guard
Resistance Properties
Rust Resistant
Maximum Airflow
3,859 cfm
Spark Resistant Construction Type
B
Maximum Ambient Temperature
104 Degrees F
Standards
AMCA
Maximum Fan Speed
2,547 RPM
Product Description
Belt-Drive Tubeaxial Fans
- Mount: vertical or horizontal Permanently lubricated ball bearings Max. inlet air temperature: 200°F Max. ambient: 104°F Precision-balanced, spark-resistant aluminum blades Belt guards AMCA Type B spark-resistant propellers (99-0401-86) Optional companion flanges are sold in pairs
- Streamlined belt tunnel ventilates the drive compartment with air from outside the fan. Steel housing is iron phosphate-processed for rust protection; baked enamel paint finish. Factory installed cast-iron sheave is assembled on fan shaft. Motors and belts are packed separately when complete fan with drive package is ordered.
- Note: These fans cannot be used if the environment surrounding them is not always free of flammable gases, vapors, or liquids; combustible dust; or ignitable fibers or flyings. Installation must comply with all local and national safety codes including the National Electrical Code (NEC) and the National Fire Protection Act (NFPA). OSHA complying guards are required when fan is installed within 8 ft. of floor or working level, or within reach of personnel. Review OSHA Codes and UL Standards.
Expertly Selected Product Pairings
Item Barcode
Tubeaxial Fan,28-5/16 In. H,18-
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 4C660 | Tubeaxial Fan,28-5/16 |
 | UNSPSC CODES | 40101604 | |
 | VMRS (ATA) CODES | 053-006-009 | Tubeaxial Fan,28-5/16 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here