Share
Print
DAYTON
120/208 to 240 VAC Thermoplastic Centrifugal Pump, 1-Phase, 2" NPT Inlet Size
Hover over image to magnify
#924386-9 | Pkg Qty: 1
$789.22 pkg | $789.22 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
Motor Only CSA
Mfr. Part Number
5RWP5
Amps
18.4/9.5-9.2 A
Mfr. Warranty Length
1 yr.
Bearing Type
Double Shielded Pre Lubricated Ball
Minimum GPM @ Head
18 gpm @ 104 ft.
Best Efficiency GPM @ Head
39 @ 85 FT.
Motor Enclosure
TEFC
Brand
DAYTON
Motor Type
Capacitor-Start, Capacitor-Run
Drain Plug
Yes
NEMA/IEC Frame
56J
Duty
Continuous
Outlet
1-1/2 in.
Frame
56J
Outlet Size
1-1/2 in. NPT
GPM @ 10 PSI
67
Package Quantity
1
GPM @ 20 PSI
61
Phase
1
GPM @ 25 PSI
55
Port Rotation
90 Degrees Increments
GPM @ 40 PSI
33
RPM
3450
GPM of Water @ 2 Ft. of Head
69
Screw Material
Stainless Steel
Height
11-13/16 in.
Seal Application
Water
Horsepower
1-1/2
Seal Material
Viton, Carbon, Ceramic, Stainless Steel
Housing Material
Thermoplastic
Seal Type
Viton Fitted Mechanical Shaft
Hz
60
Service Factor
1.1
Impeller Material
Noryl
Shaft Material
Stainless Steel
Impeller Type
Closed
Shipping Weight
50.45 lb.
Inlet
2 in.
Shut-Off
115 ft.
Inlet Pressure
30 psi
Stages
1
Item
Centrifugal Pump
Suction Lift
25 ft.
Length
18-5/8 in.
Thermal Protection
Automatic Reset
Maximum Case Pressure
80 psi
Type
Self-Priming
Maximum Fluid Viscosity
31 SSU
Voltage
120/208 to 240 VAC
Maximum Head
115 ft.
Volute Material
Thermoplastic
Maximum Pressure
50 psi
Wetted Materials
Thermoplastic, SS,Viton,Carbon,Ceramic
Maximum Specific Gravity
1
Width
6-9/16 in.
General
Application
Water Transfer, Dewatering and Lawn Sprinkling for Residential and Commercial Uses
GPM @ 35 PSI
39
Best Efficiency Flow
39 gpm
GPM @ 45 PSI
18
Best Efficiency Head
85 ft of head
Includes
Manual
Case Pressure (Maximum)
80 psi
Intake Type
NPT
Compatible Discharge Pipe Size
1 1/2 in
Intake and Discharge Size
2 in , 1 1/2 in
Compatible Intake Pipe Size
2 in
Manufacturer Warranty Length
1 yr
Compatible with Media Type
Non-Flammable Liquids
Maximum Feet of Head
115 ft
Discharge Rotation
90 Degrees Increments
Motor Ambient Temperature (Maximum)
104 Degrees F
Discharge Type
NPT
Motor Enclosure Type
TEFC
Features
Stainless Steel Fasteners and Inserts
Motor Frame Designation
56J
Flow Rate @ 10 psi
67 gpm
Nameplate Voltage
120/208-240V AC
Flow Rate @ 15 psi
66 gpm
Pressure Pump Type
Centrifugal Pump
Flow Rate @ 20 psi
61 gpm
Priming
Self-Priming
Flow Rate @ 30 psi
48 gpm
Pump Housing Material
Plastic
Flow Rate @ 40 psi
33 gpm
Shut Off Pressure (Maximum)
50 psi
Flow Rate @ 50 psi
0 gpm
Specific Gravity (Maximum)
1
For Use With
Nonflammable Liquids Compatible with Pump Component Materials
Suction Lift (Maximum)
20 ft
GPM @ 15 PSI
66
Thermal Overload Protection
Yes
GPM @ 30 PSI
48
Wetted Material
Carbon, Ceramic, Stainless Steel, Thermoplastic, Viton
Product Description
Durable and corrosion-resistant, this pump features built-in thermal overload protection. The fiberglass-reinforced pump body is specially fitted to resist seawater and saltwater.
Expertly Selected Product Pairings
Item Barcode
Pump,Centrifugal,1-1/2 Hp, 1 Ph
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 5RWP5 | Pump, Centrifugal, |
 | UNSPSC CODES | 40151503 | |
 | VMRS (ATA) CODES | 053-006-009 | Pump, Centrifugal, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here