Share
Print
ZOELLER
Effluent Pump, HP 4/10, 115 VAC, Intermittent Duty Cycle, Max. Head 38.0 ft.
Hover over image to magnify
#922456-3 | Pkg Qty: 1
$487.80 pkg | $487.80 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
UL, CSA
Maximum Liquid Temperature
130°F
Amps
8.5 A
Maximum Temperature (Deg. F)
130
Base Material
Cast Iron
Mechanical Seal
Carbon/Ceramic
Bearing Type
Lower Ball, Upper Sleeve
Mfr. Part Number
N152
Brand
ZOELLER
Mfr. Warranty Length
3 yr.
Cord Length
20 ft.
Minimum Sump Pit Diameter
18 in.
Diameter
10-3/32 in.
Motor RPM
3450
Discharge NPT
1-1/2 in.
Motor Type
Oil Filled
Duty
Continuous
Operation Type
Manual
GPM of Water @ 10 Ft. of Head
61
Package Quantity
1
GPM of Water @ 15 Ft. of Head
53
Phase
1
GPM of Water @ 20 Ft. of Head
44
Pump Body Material
Cast Iron
GPM of Water @ 25 Ft. of Head
34
Pump HP
4/10
GPM of Water @ 30 Ft. of Head
23
Pump RPM
3450
GPM of Water @ 35 Ft. of Head
9
Pump Type
Manual Operation (Switch Not Included)
GPM of Water @ 5 Ft. of Head
69
RPM
3450
Handle
Yes
Shaft Material
Carbon Steel
Height
12-1/8 in.
Shaft Seal
Carbon/Ceramic
Horsepower
4/10
Shaft Seal Material
Carbon, Ceramic
Housing
Cast Iron
Shipping Weight
38.3 lb.
Housing Material
Cast Iron
Switch Type
None
Hz
60
Thermal Protection
Thermal Protection
Impeller Material
Polypropylene
Top Material
Cast Iron
Input Phase AC
1
Type
Manual Operation (Switch Not Included)
Item
Submersible Effluent Pump
Voltage
120 VAC
Length
10-1/16 in.
Warranty
3 yr.
Maximum Diameter Solids
3/4 in.
Width
7-3/4 in.
Maximum Head
38 ft.
General
Body Dia.
10 3/32 in
Minimum Water Depth
18 in
Discharge Dia.
1 1/2 in
Nominal Voltage
110V AC
Discharge Gender
Female
Phase - Pumps
1
Discharge Standard
NPT
Rated Voltage
115V AC
Flow Rate @ 10 Ft. of Head
61 gpm
Shaft Seal Material - Pumps
Carbon, Ceramic
Flow Rate @ 15 Ft. of Head
53 gpm
Standards
UL, CSA
Flow Rate @ 20 Ft. of Head
44 gpm
Switch Actuation
No Switch Included
Includes
1-1/2" x 2" PVC Adapter Fitting
Switch Electrical Connection
No Switch Included
Min. Sump Pit Dia.
18 in
Width at Widest Point
7 3/4 in
Product Description
These 110 to 120V effluent pumps are used to drain treated water containing small solids from septic tanks and out to a drain field. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
Expertly Selected Product Pairings
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Submersible Effluent Pump,4/
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 5CZG2 | Submersible Effluent |
 | UNSPSC CODES | 40151513 | |
 | VMRS (ATA) CODES | 053-006-009 | Submersible Effluent |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here