Share
Print
DAYTON
Dayton 18" 3-Phase Tubeaxial Fan with Motor and Drive Package, 208-230/460V, 1988 Fan RPM
Hover over image to magnify
#922294-5 | Pkg Qty: 1
$2,071.51 pkg | $2,071.51 ea
This item requires special shipping, additional charges may apply.
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Assembled/Unassembled
Unassembled
Motor HP
1
Blade Diameter
18 in.
Motor Type
3-Phase
Blade Material
Aluminum
Mounting Position
Vertical/Horizontal
Brand
DAYTON
Number of Blades
6
Height
31 in.
Package Quantity
1
Item
Tubeaxial Fan with Motor and Drive Package
Phase
3
Mfr. Part Number
7AF53
Shipping Weight
98.89 lb.
Motor Enclosure
Totally Enclosed Fan Cooled
Width
21 in.
General
Airflow @ 0.000 in SP
4,671 cfm
Includes Motor
Yes
Airflow @ 0.000 in SP - Range
0 to 9,999 cfm
Maximum Ambient Temperature
104 Degrees F
Airflow @ 0.000 in. SP - Range
2,000 to 4,999 cfm
Maximum Fan Speed
1,988 RPM
Airflow @ 0.250 in Static Pressure
4,321 cfm
Maximum Inlet Air Temperature
200 Degrees F
Assembly
Unassembled
Maximum Noise Level @ 5 Feet
32 sones
Body Diameter
18 1/2 in
Motor Enclosure Design
Totally Enclosed Fan-Cooled (TEFC)
Bolt Circle Diameter
19 7/8 in
Motor Horsepower
1 hp
Brake Horsepower
91/100 hp
Motor Speed
1,740 RPM
Compatible Flange Part Number
4C718
Nameplate Voltage
208-230/460V AC
Current
3.1 to 2.8/1.4 A
Noise Level
32 sones@ 0.250 in SP and 5 ft
Exhaust Airflow @ 0.000 in SP
4,671 cfm
Nominal Voltage
208-230/460V AC
Exhaust Airflow @ 0.125 in SP
4,504 cfm
Propeller Shaft Diameter
7/8 in
Exhaust Airflow @ 0.250 in SP
4,321 cfm
Replacement Fan Blade Part Number
4C715
Exhaust Airflow @ 0.500 in SP
3,914 cfm
Resistance Properties
Rust Resistant
For Air Type
Clean Air
Spark Resistant Construction Type
B
Includes
Drive Package and Belt Guard
Standards
AMCA
Includes Drive Package
Yes
Product Description
Belt-Drive Tubeaxial Fans
- Mount: vertical or horizontal Permanently lubricated ball bearings Max. inlet air temperature: 200°F Max. ambient: 104°F Precision-balanced, spark-resistant aluminum blades Belt guards AMCA Type B spark-resistant propellers (99-0401-86) Optional companion flanges are sold in pairs
- Streamlined belt tunnel ventilates the drive compartment with air from outside the fan. Steel housing is iron phosphate-processed for rust protection; baked enamel paint finish. Factory installed cast-iron sheave is assembled on fan shaft. Motors and belts are packed separately when complete fan with drive package is ordered.
- Note: These fans cannot be used if the environment surrounding them is not always free of flammable gases, vapors, or liquids; combustible dust; or ignitable fibers or flyings. Installation must comply with all local and national safety codes including the National Electrical Code (NEC) and the National Fire Protection Act (NFPA). OSHA complying guards are required when fan is installed within 8 ft. of floor or working level, or within reach of personnel. Review OSHA Codes and UL Standards.
Item Barcode
Tubeaxial Fan w/Drive Pkg,208-
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 7AF53 | Tubeaxial Fan w/Drive |
 | UNSPSC CODES | 40101604 | |
 | VMRS (ATA) CODES | 053-006-009 | Tubeaxial Fan w/Drive |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here