Share
Print
DAYTON
Constant Pressure Booster System with Pump Controller, 3/4 HP, 1" NPT Inlet, 1" NPT Outlet
Hover over image to magnify
#921685-8 | Pkg Qty: 1
$745.85 pkg | $745.85 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
CSA CUS
Motor Ambient Temperature Rating
65°C/149°F
Amps
6.1 A
Motor Enclosure
TEFC
Best Efficiency GPM @ Head
15.4 @ 45 ft.
Motor RPM
3450
Brand
DAYTON
Motor Type
PSC
Duty
Continuous
Number of Stages
2
GPM @ 20 PSI
12.7
Outlet
1 in.
GPM @ 25 PSI
10-1/2
Outlet Size
1 in. NPT
Height
18 in.
Package Quantity
1
Horsepower
3/4
Phase
1
Housing Material
Stainless Steel
Plug/Connector Type
Direct Wire
Hz
60
Seal Application
Clear Water Below 200 PSI
Impeller Material
Thermoplastic
Seal Material
Buna
Impeller Type
Closed
Seal Type
Mechanical Seal
Inlet
1 in.
Self-Priming
No
Item
Constant Pressure Booster System
Service Factor
1.1
Length
17 in.
Shaft Material
Stainless Steel
Maximum Case Pressure
75 psi
Shipping Weight
22.38 lb.
Maximum Diameter Solids
1
Stages
2
Maximum Fluid Viscosity
100 SSU
Suction Lift
25 ft.
Maximum Inlet Pressure
50
Voltage
115 VAC
Maximum Pressure
36.7 psi
Wetted Materials
Thermoplastic,CI,416 SS,Buna N,Carbon,Ceramic,BR
Mfr. Part Number
4HFA7
Width
10 in.
Mfr. Warranty Length
1 yr.
General
Application
Home Water System
Maximum GPM @ PSI
25.1 @ 39.2
Best Efficiency GPM @ PSI
15.4 @ 20
Maximum Media Temperature
95 Degrees F
Case Pressure (Maximum)
75 psi
Maximum PSI Boost @ 2-10 GPM
39.2
Compatible Discharge Pipe Size
1 in
Maximum PSI Boost @ 20 GPM
15.9
Compatible Intake Pipe Size
1 in
Maximum PSI Boost @ 30 GPM
8.8
Compatible with Media Type
Water
Minimum GPM @ PSI
25.1 @ 39.2
Discharge Flange Size
1 in
Minimum Inlet Flow Required
25.1
Discharge Type
NPT
Motor Ambient Temperature (Maximum)
149 Degrees F
Electrical Connection Type
Plug-In
Nameplate Voltage
115V AC
For Use With
Nonflammable Liquids Compatible with Pump Component Materials
Pressure Boost (Maximum)
35 psi
For Use With Systems
Non-Potable
Pressure Boost (Minimum)
25 psi
GPM @ 15 PSI
15.0
Pressure Switch Setting
14.5-45
GPM @ 30 PSI
7.4
Priming
Manual
GPM @ 35 PSI
1.8
Pump Housing Material
Stainless Steel
Impeller Design
Closed
Pumping Application
Multi-Bath Homes
Includes
Pump Controller
Solid Diameter (Maximum)
1 in
Includes Controller
Yes
Suction Lift (Maximum)
25 ft
Intake Type
NPT
System Pressure (Maximum)
37 psi
Intake and Discharge Size
1 in , 1 in
Thermal Overload Protection
Yes
Manufacturer Warranty Length
1 yr
Wetted Material
Stainless Steel, BR, Buna-N, Carbon, Ceramic, CI, Thermoplastic
Product Description
For boosting water pressure in a home water system. 2-stage impeller design increases pump performance. Stainless steel body and thermoplastic impellers resist corrosion.
Item Barcode
Booster System, Stainless
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 4HFA7 | Booster System, |
 | UNSPSC CODES | 40151503 | |
 | VMRS (ATA) CODES | 053-006-009 | Booster System, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here