Share
Print
LIQUIDYNAMICS INC.
Electric Operated Drum Pump, Metered Dispensing with Manual Shut-Off, 115V AC, 1/10 hp Motor HP
Hover over image to magnify
#921427-6 | Pkg Qty: 1
$1,374.54 pkg | $1,374.54 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Adapter Material
316 Stainless Steel
Mfr. Warranty Length
12 yr. Pump, 1 yr. Dispensing System
Adapter Type
RSV
Motor Enclosure
IP55
Agency Compliance
ISO
Motor RPM
1,750 RPM
Amps
3-1/2
Motor Type
2 Pole
Bearing Type
Sealed Ball
Nozzle Material
Poly, Stainless Steel
Brand
LIQUIDYNAMICS INC.
Nozzle Type
Manual
Bypass Valve
Internal
Outlet Size
3/4" Barb
Cord Length
6 ft.
Outside Height
16 in.
Duty
Intermittent
Overall Length
20 in.
Duty Cycle
Intermittent
Overall Width
12 in.
Food Grade
No
Package Quantity
1
Full Load Amps
4-1/2
Phase
1
GPM
8
Power Source
Electric
Gasket Material
EPDM
Pressure Range
23 psi
Horsepower
1/10
Pump Body Material
Polypropylene
Hose Diameter
3/4 in.
Pump Design
Nutating Diaphragm
Hose Length
12 ft.
Seal Material
EPDM
Hose Material
Peroxide Cured EPDM
Seal Type
Mechanical
Housing Material
Polypropylene
Self-Priming
Yes
Hz
60
Shaft Material
Stainless Steel
Inlet Size
3/4"
Shipping Weight
32 lb.
Item
Electric Operated Drum Pump
Spout Material
316 Stainless Steel
Maximum GPM for Water
8
Suction Lift
6 ft.
Maximum Head
48 ft.
Transfer Pump Application
Agriculture, Automotive, Construction, Farming, Industrial, Marine, Trucking
Maximum Liquid Temperature
104°F
Variable Speed
No
Maximum Pressure
33 psi
Voltage
115 VAC
Maximum Viscosity
18 cps
Wetted Materials
EPDM, Polypropylene, Stainless Steel
Metered
Yes
pH Range
5.0 to 10
Mfr. Part Number
DS15H12XMPXXRSV
General
Application
Diesel Exhaust Fluid, Anti-Freeze, Clean Water
Includes Nozzle
Yes
Compatible Chemicals
Acetic Acid 20%, Ammonium Hydroxide, Antifreeze (Coolant), Citric Acid 50%, DEF, Deionized Water, Ethyl (Ethanol), Ethylene Glycol, Formaldehyde, Formaldehyde 40%, Fresh Water, Glycerin, Isopropyl (Isopropanol), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfite, Sodium Hypochlorite/Bleach (to 20%)
Includes Spout
Yes
Diesel Exhaust Fluid Compatible
Yes
Includes Suction Tube
Yes
Discharge Connection Type
Hose Barb
Max. Fluid Temp.
104 Degrees F
Discharge Tube Outlet ID
3/4 in
Max. Head - Pumps
48 ft
Features
Dispenses 8 gpm
Min. Fluid Temp.
17 Degrees F
For Container Size
55 gal, 275 gal, 330 gal
Noise Level
70 db
For Container Type
Drum, Tote
Nominal Voltage
110V AC
For Media Type
Acetic Acid, Ammonium Hydroxide, Antifreeze, Bleach, Citric Acid, DEF, Ethanol, Ethylene Glycol, Formaldehyde, Glycerin, Isopropanol, Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfite, Water
Not Recommended Chemicals
Acetic Acid (Glacial), Acetic Acid 80%, Acetone, Ammonia (Liquids), Anhydrous Ammonia, Automatic Transmission Fluid, Biodiesel, Brake Fluid, Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Cyclohexane, Diesel Fuel, E85, Ethyl Acetate, Fertilizers, Formic Acid, Fungicides, Gasoline, Heptane, Herbicides, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrazine, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Kerosene, Lacquer Thinners, Lithium Grease, Methyl (Methanol), Methyl Chloride, Methyl Ethyl Ketone (MEK), Motor Oil, Naphtha, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Paint, Paint Thinner, Pesticides, Phosphoric Acid (40% Solution), Sodium Bisulfate, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%), Toluene, Trichlorethylene (50%), Turpentine, Windshield Washer Fluid, Xylene
For Use With
Anti-Freeze, Clean Water, Diesel Exhaust Fluid
Pump Connection Type
Hose Barb
Height Above Container
4 in
Pump Package Type
Metered Dispensing with Manual Shut-Off
Hose Cover Material
Thermal Plastic
Rated Voltage
115V AC
Hose Inside Dia.
3/4 in
Runs Dry
Yes
Includes
Coupler, Drip Cup, Hose, Nozzle, Nozzle Hanger, Side Mount Hanger
Spout Connection Type
Integral to Nozzle
Includes Discharge Hose
Yes
Suction Tube ID
3/4 in
Product Description
Diesel exhaust fluid (DEF) stationary electric drum pumps are used specifically with DEF to maintain purity when filling the reservoir of a diesel engine's Selective Catalytic Reduction (SCR) system. These pumps are certified to ISO standards that regulate the handling, transportation, and storage of DEF. They are used for dispensing and transferring moderate to large volumes of DEF when servicing late model trucks and SUVs as well as SCR-based stationary industrial systems that operate on diesel fuel.
Item Barcode
Def Transfer Pump,6 Ft. Cord L.
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 49NT49 | DEF Transfer Pump,6 ft. |
 | UNSPSC CODES | 40151532 | |
 | VMRS (ATA) CODES | 053-006-009 | DEF Transfer Pump,6 ft. |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here