Share
Print
DAYTON
Dayton 24" 3-Phase Tubeaxial Fan with Motor and Drive Package, 208-230/460V, 1910 Fan RPM
Hover over image to magnify
#921186-1 | Pkg Qty: 1
$2,716.80 pkg | $2,716.80 ea
This item requires special shipping, additional charges may apply.
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Assembled/Unassembled
Unassembled
Motor HP
3
Blade Diameter
24 in.
Motor Type
3-Phase
Blade Material
Spark Resistant Aluminum
Mounting Position
Vertical/Horizontal
Brand
DAYTON
Number of Blades
6
Height
37-1/4 in.
Package Quantity
1
Item
Tubeaxial Fan with Motor and Drive Package
Phase
3
Mfr. Part Number
7F832
Shipping Weight
192.81 lb.
Motor Enclosure
Totally Enclosed Fan Cooled
Width
26-7/8 in.
General
Airflow @ 0.000 in SP
10,310 cfm
Includes Motor
Yes
Airflow @ 0.000 in SP - Range
10,000 to 19,999 cfm
Maximum Ambient Temperature
104 Degrees F
Airflow @ 0.000 in. SP - Range
8,000 to 15,000 cfm
Maximum Fan Speed
1,910 RPM
Airflow @ 0.250 in Static Pressure
9,850 cfm
Maximum Inlet Air Temperature
200 Degrees F
Bolt Circle Diameter
25 3/4 in
Maximum Noise Level @ 5 Feet
50 sones
Brake Horsepower
2 77/100 hp
Motor Enclosure Design
Totally Enclosed Fan-Cooled (TEFC)
Compatible Flange Part Number
3C436
Motor Speed
1,740 RPM
Current
8.7 to 7.8/3.9 A
Nameplate Voltage
208-230/460V AC
Exhaust Airflow @ 0.000 in SP
10,310 cfm
Noise Level
50 sones@ 0.250 in SP and 5 ft
Exhaust Airflow @ 0.125 in SP
10,084 cfm
Nominal Voltage
208-230/460V AC
Exhaust Airflow @ 0.250 in SP
9,850 cfm
Propeller Shaft Diameter
1 in
Exhaust Airflow @ 0.500 in SP
9,332 cfm
Replacement Fan Blade Part Number
4C664
For Air Type
Clean Air
Resistance Properties
Rust Resistant
Includes
Belt Guard
Spark Resistant Construction Type
B
Includes Drive Package
Yes
Standards
AMCA
Product Description
Belt-Drive Tubeaxial Fans
- Mount: vertical or horizontal Permanently lubricated ball bearings Max. inlet air temperature: 200°F Max. ambient: 104°F Precision-balanced, spark-resistant aluminum blades Belt guards AMCA Type B spark-resistant propellers (99-0401-86) Optional companion flanges are sold in pairs
- Streamlined belt tunnel ventilates the drive compartment with air from outside the fan. Steel housing is iron phosphate-processed for rust protection; baked enamel paint finish. Factory installed cast-iron sheave is assembled on fan shaft. Motors and belts are packed separately when complete fan with drive package is ordered.
- Note: These fans cannot be used if the environment surrounding them is not always free of flammable gases, vapors, or liquids; combustible dust; or ignitable fibers or flyings. Installation must comply with all local and national safety codes including the National Electrical Code (NEC) and the National Fire Protection Act (NFPA). OSHA complying guards are required when fan is installed within 8 ft. of floor or working level, or within reach of personnel. Review OSHA Codes and UL Standards.
Item Barcode
Fan,Tubeaxial,24 In
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 7F832 | Fan, Tubeaxial,24 |
 | UNSPSC CODES | 40101604 | |
 | VMRS (ATA) CODES | 053-006-009 | Fan, Tubeaxial,24 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here