Share
Print
DAYTON
Effluent Pump, HP 1/2, 120 VAC, Intermittent Duty Cycle, Max. Head 79.0 ft.
Hover over image to magnify
#920857-6 | Pkg Qty: 1
$1,171.01 pkg | $1,171.01 ea
This item requires special shipping, additional charges may apply.
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Amps
11.9 A
Impeller Material
Polypropylene
Base Material
Cast Iron
Input Phase AC
1
Brand
DAYTON
Item
Submersible Effluent Pump
Cord Length
20 ft.
Length
16-3/4 in.
Diameter
12-1/4 in.
Maximum Diameter Solids
3/4 in.
Discharge NPT
2 in.
Maximum Head
79 ft.
Duty
Intermittent
Maximum Liquid Temperature
104°F
GPM of Water @ 10 Ft. of Head
76
Maximum Temperature (Deg. F)
104
GPM of Water @ 15 Ft. of Head
70
Mechanical Seal
SiC/Buna
GPM of Water @ 20 Ft. of Head
66
Mfr. Part Number
3BB83
GPM of Water @ 25 Ft. of Head
61
Minimum Sump Pit Diameter
18 in.
GPM of Water @ 30 Ft. of Head
56
Operation Type
Automatic
GPM of Water @ 35 Ft. of Head
60
Package Quantity
1
GPM of Water @ 40 Ft. of Head
47
Phase
1
GPM of Water @ 45 Ft. of Head
40
Pump Body Material
Cast Iron
GPM of Water @ 5 Ft. of Head
77
Pump HP
1/2
GPM of Water @ 50 Ft. of Head
36
Pump RPM
3450
GPM of Water @ 55 Ft. of Head
30
Pump Type
Automatic Operation (Switch Included)
GPM of Water @ 60 Ft. of Head
25
Shaft Seal
Silicon Carbide/Buna N
GPM of Water @ 70 Ft. of Head
12
Shaft Seal Material
Buna-N, Silicon Carbide
Handle
Yes
Shipping Weight
79.75 lb.
Height
16-3/4 in.
Switch Type
Tether
Horsepower
1/2
Top Material
Cast Iron
Housing
Cast Iron
Type
Automatic Operation (Switch Included)
Housing Material
Cast Iron
Voltage
120 VAC
Hz
60
Width
12-3/16 in.
General
Body Dia.
12 1/4 in
Minimum Water Depth
18 in
Discharge Dia.
2 in
Nominal Voltage
110V AC
Flow Rate @ 10 Ft. of Head
76 gpm
Phase - Pumps
1
Flow Rate @ 100 Ft. of Head
0 gpm
Rated Voltage
120V AC
Flow Rate @ 15 Ft. of Head
70 gpm
Shaft Seal Material - Pumps
Nitrile Rubber, Silicon Carbide
Flow Rate @ 20 Ft. of Head
66 gpm
Switch Actuation
Tether Float
Flow Rate @ 40 Ft. of Head
47 gpm
Switch Electrical Connection
Piggyback
Flow Rate @ 60 Ft. of Head
25 gpm
Width at Widest Point
12 3/16 in
Min. Sump Pit Dia.
18 in
Product Description
These 110 to 120V effluent pumps are used to drain treated water containing small solids from septic tanks and out to a drain field. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
Expertly Selected Product Pairings
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Pump,Effluent,1/2hp
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 3BB83 | Pump, Effluent,1/ |
 | UNSPSC CODES | 40151512 | |
 | VMRS (ATA) CODES | 053-006-009 | Pump, Effluent,1/ |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here