Share  
Print  
DAYTON

Effluent Pump, HP 1/2, 120 VAC, Intermittent Duty Cycle, Max. Head 45.0 ft.

Hover over image to magnify
Pump,Effluent,1/2hp
PI_Asset_1757908
PI_Asset_1767731
Pump,Effluent,1/2hp
PI_Asset_1757908
PI_Asset_1767731

#920820-3 | Pkg Qty: 1

$732.16 pkg | $732.16 ea

Drop Ship Item

Shipping to 60045
|

Technical Specifications

Key Specifications
Amps
6.4
Length
14-1/32 in.
Base Material
Cast Iron
Maximum Diameter Solids
3/4 in.
Bearing Type
Ball
Maximum Head
45 ft.
Body Material
Cast Iron
Maximum Liquid Temperature
77°F
Brand
DAYTON
Maximum Temperature (Deg. F)
77
Cord Length
20 ft.
Mechanical Seal
SiC/Buna
Diameter
9-5/8 in.
Mfr. Part Number
4HU70
Discharge
2 in.
Minimum Sump Pit Diameter
18 in.
Discharge NPT
2 in.
Motor RPM
3450
Duty
Intermittent
Motor Type
Oil Filled PSC
Duty Cycle
Intermittent
Operation Type
Manual
GPM of Water @ 10 Ft. of Head
45
Overall Height
14-1/16 in.
GPM of Water @ 15 Ft. of Head
42
Package Quantity
1
GPM of Water @ 20 Ft. of Head
37
Phase
1
GPM of Water @ 25 Ft. of Head
32
Pump Body Material
Cast Iron
GPM of Water @ 30 Ft. of Head
26
Pump HP
1/2
GPM of Water @ 35 Ft. of Head
18
Pump RPM
3450
GPM of Water @ 40 Ft. of Head
10
Pump Type
Manual Operation (Switch Not Included)
GPM of Water @ 5 Ft. of Head
48
RPM
3450 RPM
Handle
Yes
Shaft Seal
Silicon Carbide/Buna N
Height
14-1/16 in.
Shaft Seal Material
Buna-N, Silicon Carbide
Horsepower
1/2
Shipping Weight
45.95 lb.
Housing
Cast Iron
Switch Type
None
Housing Material
Cast Iron
Top Material
Cast Iron
Hz
60 Hz
Type
Manual Operation (Switch Not Included)
Impeller Material
Cast Iron
Voltage
120 VAC
Input Phase AC
1
Width
9-5/8 in.
Item
Submersible Effluent Pump
General
Body Dia.
9 5/8 in
Nominal Voltage
110V AC
Discharge Dia.
2 in
Phase - Pumps
1
Flow Rate @ 10 Ft. of Head
45 gpm
Rated Voltage
120V AC
Flow Rate @ 15 Ft. of Head
42 gpm
Shaft Seal Material - Pumps
Nitrile Rubber, Silicon Carbide
Flow Rate @ 20 Ft. of Head
37 gpm
Switch Actuation
No Switch Included
Flow Rate @ 40 Ft. of Head
10 gpm
Switch Electrical Connection
No Switch Included
Min. Sump Pit Dia.
18 in
Width at Widest Point
9 5/8 in
Minimum Water Depth
18 in

Product Description

These 110 to 120V effluent pumps are used to drain treated water containing small solids from septic tanks and out to a drain field. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.

Expertly Selected Product Pairings

Hose Clamp,Min.Dia.1,SAE 24,
$14.00 pkg | $1.40 ea
Item: 912391-6 | Pkg Qty: 10
Nipple,Hose,1 1/2 In
$4.21 pkg | $4.21 ea
Item: 914711-9 | Pkg Qty: 1
Float Switch,Mechanical,115
$122.32 pkg | $122.32 ea
Item: 914966-7 | Pkg Qty: 1
Check Valve,Tpr,1-1/4 In. Or 1-
$23.34 pkg | $23.34 ea
Item: 915562 | Pkg Qty: 1

Compliance & Restrictions

California Proposition 65 Icon
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
9208203
Pump,Effluent,1/2hp
 NameItemDescription
Grainger DropshipGrainger Dropship4HU70Pump, Effluent,1/
UNSPSC CODESUNSPSC CODES40151512
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Pump, Effluent,1/

For more product information by email, click here