Home All Products Fluid Transfer & Pumps Water Pumps Sewage Pumps, Systems & Accessories Effluent Pumps SKU: 920516-9
Share  
Print  
DAYTON

Effluent Pump, HP 1, 460 VAC, Intermittent Duty Cycle, Max. Head 109.0 ft.

Hover over image to magnify
Pump,Effluent,1 Hp
PI_Asset_1757910
PI_Asset_1767733
Pump,Effluent,1 Hp
PI_Asset_1757910
PI_Asset_1767733

#920516-9 | Pkg Qty: 1

$1,436.00 pkg | $1,436.00 ea
This item requires special shipping, additional charges may apply.

Drop Ship Item

Shipping to 60045
|

Technical Specifications

Key Specifications
Amps
2.8
Housing Material
Cast Iron
Base Material
Cast Iron
Hz
60 Hz
Bearing Type
Ball
Impeller Material
Polypropylene
Body Material
Cast Iron
Input Phase AC
3
Brand
DAYTON
Item
Submersible Effluent Pump
Cord Length
20 ft.
Length
16-3/4 in.
Diameter
12-3/16 in.
Maximum Diameter Solids
3/4 in.
Discharge
2 in.
Maximum Head
109 ft.
Discharge NPT
2 in.
Maximum Liquid Temperature
104°F
Duty
Intermittent
Maximum Temperature (Deg. F)
104
Duty Cycle
Intermittent
Mechanical Seal
SiC/Buna
GPM of Water @ 10 Ft. of Head
85
Mfr. Part Number
4HU78
GPM of Water @ 100 Ft. of Head
12
Minimum Sump Pit Diameter
18 in.
GPM of Water @ 15 Ft. of Head
83
Motor RPM
3450
GPM of Water @ 20 Ft. of Head
80
Motor Type
3 Phase
GPM of Water @ 25 Ft. of Head
78
Operation Type
Manual
GPM of Water @ 30 Ft. of Head
74
Overall Height
16-3/4 in.
GPM of Water @ 35 Ft. of Head
71
Package Quantity
1
GPM of Water @ 40 Ft. of Head
68
Phase
3
GPM of Water @ 45 Ft. of Head
64
Pump Body Material
Cast Iron
GPM of Water @ 5 Ft. of Head
86
Pump HP
1
GPM of Water @ 50 Ft. of Head
60
Pump RPM
3450
GPM of Water @ 55 Ft. of Head
56
Pump Type
Manual Operation (Switch Not Included)
GPM of Water @ 60 Ft. of Head
52
RPM
3450 RPM
GPM of Water @ 70 Ft. of Head
44
Shaft Seal
Silicon Carbide/Buna N
GPM of Water @ 80 Ft. of Head
34
Shaft Seal Material
Buna-N, Silicon Carbide
GPM of Water @ 90 Ft. of Head
22
Shipping Weight
78.55 lb.
Gauge/Conductor
18/3
Switch Type
None
Handle
Yes
Top Material
Cast Iron
Height
16-3/4 in.
Type
Manual Operation (Switch Not Included)
Horsepower
1
Voltage
460 VAC
Housing
Cast Iron
Width
12-1/6 in.
General
Body Dia.
12 3/16 in
Min. Sump Pit Dia.
18 in
Discharge Dia.
2 in
Minimum Water Depth
18 in
Flow Rate @ 10 Ft. of Head
85 gpm
Nominal Voltage
480V AC
Flow Rate @ 100 Ft. of Head
12 gpm
Phase - Pumps
3
Flow Rate @ 15 Ft. of Head
83 gpm
Rated Voltage
460V AC
Flow Rate @ 20 Ft. of Head
80 gpm
Shaft Seal Material - Pumps
Nitrile Rubber, Silicon Carbide
Flow Rate @ 40 Ft. of Head
68 gpm
Switch Actuation
No Switch Included
Flow Rate @ 60 Ft. of Head
52 gpm
Switch Electrical Connection
No Switch Included
Flow Rate @ 80 Ft. of Head
34 gpm
Width at Widest Point
12 1/6 in
HP
1

Product Description

These three-phase 220 to 480V effluent pumps have three-phase motors that are more efficient than one phase, and they use a higher voltage that allows for larger motors that require less current than lower-voltage motors. They are used to drain treated water containing small solids from septic tanks and out to a drain field. Three-phase pumps require a control panel.

Expertly Selected Product Pairings

Hose Clamp,Min.Dia.1-1/2,SAE
$14.70 pkg | $1.47 ea
Item: 912773-4 | Pkg Qty: 10
Hose Clamp,3 To 5 In,SAE 72,SS,
$23.60 pkg | $2.36 ea
Item: 914551-2 | Pkg Qty: 10

Compliance & Restrictions

California Proposition 65 Icon
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Documents

Dayton 4HU78 Submersible Effluent Pumps Technical Data Sheet
Item Barcode
9205169
Pump,Effluent,1 Hp
 NameItemDescription
Grainger DropshipGrainger Dropship4HU78Pump, Effluent,1 HP
UNSPSC CODESUNSPSC CODES40151512
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Pump, Effluent,1 HP

For more product information by email, click here