Share
Print
LIQUIDYNAMICS INC.
Electric Operated Drum Pump, Metered Dispensing with Manual Shut-Off, 115VAC, 1/10 Motor HP
Hover over image to magnify
#920351-1 | Pkg Qty: 1
$1,893.20 pkg | $1,893.20 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
ISO
Motor RPM
1,750 RPM
Amps AC
4.7
Motor Type
2 Pole
Bearing Type
Sealed Ball
Nozzle Material
Poly, Stainless Steel
Brand
LIQUIDYNAMICS INC.
Nozzle Type
Manual
Bypass Valve
Internal
Outlet Size
3/4"
Compatible Fluids
Diesel Exhaust Fluid, Antifreeze, Clean Water
Package Quantity
1
Duty Cycle
Intermittent
Power Cord Length
6 ft.
Food Grade
No
Power Source
Electric
Full Load Amps
4-1/2
Pressure Range
23 psi
GPM
8
Pump Design
Nutating Diaphragm
Horsepower
1/2
Seal Material
EPDM
Hose Diameter
3/4 in.
Seal Type
Mechanical
Hose Length
15 ft.
Self-Priming
Yes
Housing Material
Polyproplylene
Shipping Weight
33 lb.
Inlet Size
3/4"
Spout Material
316 Stainless Steel
Item
Electric Operated Drum Pump
Suction Tube Length
4 ft.
Maximum Viscosity
0.01 cP
Transfer Pump Application
Agriculture, Automotive, Construction, Farming, Industrial, Marine, Trucking
Metered
Yes
Variable Speed
No
Mfr. Part Number
970027-06MG
Voltage
115 VAC
Mfr. Warranty Length
30 Days Manufacturing Defects, 2 yr. Pump
Wetted Materials
EPDM, Polypropylene, Stainless Steel
Motor Enclosure
IP55
General
Compatible Chemicals
Acetic Acid 20%, Ammonium Hydroxide, Antifreeze (Coolant), Citric Acid 50%, DEF, Deionized Water, Ethyl (Ethanol), Ethylene Glycol, Formaldehyde, Formaldehyde 40%, Fresh Water, Glycerin, Isopropyl (Isopropanol), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfite, Sodium Hypochlorite/Bleach (to 20%)
Includes Suction Tube
Yes
Diesel Exhaust Fluid Compatible
Yes
Max. Fluid Temp.
104 Degrees F
Discharge Connection Type
Hose Barb
Max. Head - Pumps
48 ft
Discharge Tube Outlet ID
3/4 in
Min. Fluid Temp.
17 Degrees F
Discharge Tube Outlet OD
1 in
Noise Level
70 db
For Container Size
55 gal, 275 gal, 330 gal
Nominal Voltage
110V AC
For Container Type
Drum, Tote
Not Recommended Chemicals
Acetic Acid (Glacial), Acetic Acid 80%, Acetone, Ammonia (Liquids), Anhydrous Ammonia, Automatic Transmission Fluid, Biodiesel, Brake Fluid, Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Cyclohexane, Diesel Fuel, E85, Ethyl Acetate, Fertilizers, Formic Acid, Fungicides, Gasoline, Heptane, Herbicides, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrazine, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Kerosene, Lacquer Thinners, Lithium Grease, Methyl (Methanol), Methyl Chloride, Methyl Ethyl Ketone (MEK), Motor Oil, Naphtha, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Paint, Paint Thinner, Pesticides, Phosphoric Acid (40% Solution), Sodium Bisulfate, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%), Toluene, Trichlorethylene (50%), Turpentine, Windshield Washer Fluid, Xylene
For Media Type
Acetic Acid, Ammonium Hydroxide, Antifreeze, Bleach, Citric Acid, DEF, Ethanol, Ethylene Glycol, Formaldehyde, Glycerin, Isopropanol, Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfite, Water
Number of Phases
1
For Use With
Antifreeze, Clean Water, Diesel Exhaust Fluid
Pump Connection OD
1 in
Frequency (Hz)
60
Pump Connection Type
Hose Barb
Hose Cover Material
Thermal Plastic
Pump Package Type
Metered Dispensing with Manual Shut-Off
Hose Inside Dia.
3/4 in
Rated Voltage
115V AC
Hose Outside Dia.
1 in
Runs Dry
Yes
Housing Material - Pumps
Polypropylene
Spout Connection Type
Integral to Nozzle
Includes
Digital Turbine Meter, Drip Cup, Hanger Plate, Nozzle Holder, Pump
Spout Discharge Size
3/4 in
Includes Discharge Hose
Yes
Standards
CE, IP 56
Includes Nozzle
Yes
Suction Tube ID
3/4 in
Includes Spout
Yes
Suction Tube OD
1 in
Product Description
Diesel exhaust fluid (DEF) stationary electric drum pumps are used specifically with DEF to maintain purity when filling the reservoir of a diesel engine's Selective Catalytic Reduction (SCR) system. These pumps are certified to ISO standards that regulate the handling, transportation, and storage of DEF. They are used for dispensing and transferring moderate to large volumes of DEF when servicing late model trucks and SUVs as well as SCR-based stationary industrial systems that operate on diesel fuel.
Item Barcode
Def Transfer Pump,115VAC, 8
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 45NA79 | DEF Transfer Pump,115VAC, |
 | UNSPSC CODES | 40151532 | |
 | VMRS (ATA) CODES | 053-006-009 | DEF Transfer Pump,115VAC, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here