Share
Print
FINISH THOMPSON
Electric Operated Drum Pump, Unmetered Dispensing with Automatic Shut-Off, 115VAC, 1/3 Motor HP
Hover over image to magnify
#920344-7 | Pkg Qty: 1
$1,441.23 pkg | $1,441.23 ea
This item requires special shipping, additional charges may apply.
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Action Type
Piston
Metered
No
Adapter Material
PVC
Mfr. Part Number
EFP-54/S1
Adapter Type
Sealed
Mfr. Warranty Length
1 yr.
Agency Compliance
CSA, ISO 22241-3 (Purity Standard)
Motor Enclosure
ODP
Brand
FINISH THOMPSON
Motor RPM
8000 to 14,000
DEF Compatible
Yes
Motor Type
Universal AC/DC
Discharge Tube Length
8 ft.
Nozzle Material
FKM, Polypropylene, Stainless Steel
Discharge Tube Outlet ID Size
3/4"
Outlet Size
3/4" Barb
Discharge Tube Outlet Outside Diameter
1-1/8"
Overall Length
48-5/8 in.
Discharge Tubing Material
EPDM
Package Quantity
1
Duty Cycle
Continuous
Phase
1
Food Grade
No
Plug Type
NEMA 5-15
For Use On
Super Totes
Power Source
Electric
Full Load Amps
2
Pump Body Material
Polypropylene
GPM
17
RPM
8000 to 14,000
Horsepower
1/3
Seal Material
FKM
Hose Length
8 ft.
Self-Priming
Yes
Hose Material
EPDM
Series
EF
Housing Material
Polypropylene
Shipping Weight
11.83 lb.
Hz
60
Suction Tube Length
54 in.
Inlet Size
1-1/4"
Suction Tube Outlet Outside Diameter
1-1/4 in.
Item
Electric Operated Drum Pump
Suction Tube Type
Constant
Maximum Air Inlet PSI
8.7
Thermal Protection
No
Maximum GPM for Oil
7 @ 100 CPS
Type
Motor and Tube
Maximum GPM for Water
17
Variable Speed
Yes
Maximum Head
20 ft.
Voltage
115 VAC
Maximum Liquid Temperature
150°F
Wetted Materials
316 Stainless Steel, FKM, Polypropylene, PTFE
Maximum Pressure
8.7 psi
pH Range
6 to 10
Maximum Viscosity
300 CPS
General
Adapter Connection Type
Buttress
Max. Flow Rate
17 gpm
Application
Diesel Exhaust Fluid
Max. Fluid Temp.
150 Degrees F
Bung Connection Dia.
2 in
Max. Head - Pumps
20 ft
Compatible Chemicals
Acetic Acid 20%, Acetic Acid 80%, Ammonium Hydroxide, Antifreeze (Coolant), Calcium Chloride, Citric Acid 50%, Deionized Water, Ethylene Glycol, Formic Acid, Fresh Water, Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%)
Max. Head Pressure
8.7 psi
Discharge Connection Type
Hose Barb
Max. Outlet Pressure
8.7 psi
Discharge Tube Outlet ID
3/4 in
Min. Fluid Temp.
0 Degrees F
Discharge Tube Outlet OD
1 in
Noise Level
74 db
For Container Size
275 gal
Nominal Voltage
110V AC
For Container Type
Tote
Not Recommended Chemicals
Acetic Acid (Glacial), Acetone, Ammonia (Liquids), Anhydrous Ammonia, Automatic Transmission Fluid, Biodiesel, Brake Fluid, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Cyclohexane, DEF, Diesel Fuel, E85, Ethyl (Ethanol), Ethyl Acetate, Formaldehyde, Formaldehyde 40%, Gasoline, Glycerin, Heptane, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrazine, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Isopropyl (Isopropanol), Kerosene, Lacquer Thinners, Methyl (Methanol), Methyl Ethyl Ketone (MEK), Naphtha, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Paint Thinner, Sodium Hypochlorite/Bleach (to 20%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%), Toluene, Trichlorethylene (50%), Turpentine, Windshield Washer Fluid, Xylene
For Media Type
Acetic Acid, Ammonium Hydroxide, Antifreeze, Calcium Chloride, Citric Acid, Ethylene Glycol, Formic Acid, Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide, Water
Nozzle Operation
Automatic
For Use With
Diesel Exhaust Fluid
Number of Phases
1
Frequency (Hz)
60
Pump Connection ID
1 1/4 in
Height Above Container
8 5/8 in
Pump Connection OD
2 in
Hose Inside Dia.
3/4 in
Pump Connection Type
Smooth Bore
Hose Outside Dia.
1 in
Pump Package Type
Unmetered Dispensing with Automatic Shut-Off
Hose Tube Material
EPDM
Rated Voltage
115V AC
Housing Material - Pumps
Polypropylene
Special Features
Economical choice, Available with a two-speed electric or air motor, Ideal alternative to slow, troublesome hand pumps
Includes
Adapter and Nozzle, Clamp, Hose, Motor, Pump
Standards
CSA Certified
Includes Bung Adapter
Yes
Suction Tube ID
1 1/4 in
Includes Discharge Hose
Yes
Suction Tube Material
Polypropylene
Includes Nozzle
Yes
Suction Tube OD
1 1/4 in
Includes Suction Tube
Yes
Product Description
Acid, base, and solvent electric drum pumps are made with corrosion-resistant materials that withstand a range of acidic and basic chemical concentrations. They are used to dispense and transfer moderate to large volumes of substances and solutions in laboratories and chemical processing plants.
Documents
Item Barcode
Drum Pump,115VAC,1/3 Hp,60 Hz
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 15R542 | Drum Pump, 115VAC,1/3 |
 | UNSPSC CODES | 40151529 | |
 | VMRS (ATA) CODES | 053-006-009 | Drum Pump, 115VAC,1/3 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here