Share
Print
DAYTON
Constant Pressure Booster System with Pump Controller, 1 HP, 1" NPT Inlet, 1" NPT Outlet
Hover over image to magnify
#920005-6 | Pkg Qty: 1
$893.14 pkg | $893.14 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
CSA CUS
Mfr. Warranty Length
1 yr.
Amps
7.7 A
Motor Ambient Temperature Rating
65°C/149°F
Best Efficiency GPM @ Head
15.2 @ 67 ft.
Motor Enclosure
TEFC
Brand
DAYTON
Motor RPM
3450
Duty
Continuous
Motor Type
PSC
GPM @ 20 PSI
16-1/2
Number of Stages
2
GPM @ 25 PSI
14.4
Outlet
1 in.
GPM @ 40 PSI
5.3
Outlet Size
1 in. NPT
Height
18 in.
Package Quantity
1
Horsepower
1
Phase
1
Housing Material
Stainless Steel
Plug/Connector Type
Direct Wire
Hz
60
Seal Application
Clear Water Below 200 PSI
Impeller Material
Thermoplastic
Seal Material
Buna
Impeller Type
Closed
Seal Type
Mechanical Seal
Inlet
1 in.
Self-Priming
No
Item
Constant Pressure Booster System
Service Factor
1.1
Length
17 in.
Shaft Material
Stainless Steel
Maximum Case Pressure
75 psi
Shipping Weight
22.35 lb.
Maximum Diameter Solids
1
Stages
2
Maximum Fluid Viscosity
100 SSU
Suction Lift
25 ft.
Maximum Inlet Pressure
50
Voltage
115 VAC
Maximum Pressure
45.3 psi
Wetted Materials
Thermoplastic,CI,416 SS,Buna N,Carbon,Ceramic,BR
Mfr. Part Number
4HFA8
Width
10 in.
General
Application
Home Water System
Maximum PSI Boost @ 20 GPM
20.4
Best Efficiency GPM @ PSI
15.2 @ 30
Maximum PSI Boost @ 30 GPM
18.7
Compatible with Media Type
Water
Minimum GPM @ PSI
28.6 @ 47.1
Discharge Type
NPT
Minimum Inlet Flow Required
28.6
Electrical Connection Type
Plug-In
Motor Ambient Temperature (Maximum)
149 Degrees F
For Use With
Nonflammable Liquids Compatible with Pump Component Materials
Nameplate Voltage
115V AC
For Use With Systems
Non-Potable
Pressure Boost (Maximum)
35 psi
GPM @ 15 PSI
18.5
Pressure Boost (Minimum)
25 psi
GPM @ 30 PSI
12
Pressure Switch Setting
14.5-45
GPM @ 35 PSI
9.1
Priming
Manual
Includes
Pump Controller
Pumping Application
Multi-Bath Homes
Includes Controller
Yes
Suction Lift (Maximum)
25 ft
Intake Type
NPT
System Pressure (Maximum)
45 psi
Maximum GPM @ PSI
28.6 @ 47.1
Thermal Overload Protection
Yes
Maximum Media Temperature
95 Degrees F
Wetted Material
Stainless Steel, BR, Buna-N, Carbon, Ceramic, CI, Thermoplastic
Maximum PSI Boost @ 2-10 GPM
47.1
Product Description
For boosting water pressure in a home water system. 2-stage impeller design increases pump performance. Stainless steel body and thermoplastic impellers resist corrosion.
Item Barcode
Booster System, Stainless
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 4HFA8 | Booster System, |
 | UNSPSC CODES | 40151503 | |
 | VMRS (ATA) CODES | 053-006-009 | Booster System, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here