3/8" NPT Filter/Regulator/Lubricator with 5 to 150 psi Adjustment Range
#919551-5 | Pkg Qty: 1
Drop Ship Item
Technical Specifications
Key Specifications
General
Product Description
This 3-pc. unit combines filter, regulator, and MicroMist lubricator. Modular connector allows easy removal and swap out. Some assembly required. For filter, the CFM is based on 100 psig inlet and 5 psig pressure drop. For regulator, the CFM flow is measured with 100 psig inlet adjusted to a set pressure of 90 psig (while increasing flow) and a 15 psig drop. For lubricator, the CFM is based on 100 psig inlet and 5 psig pressure drop. Note: Polycarbonate bowls are not recommended for use in atmospheres containing chemicals such as acetone, benzene, carbon tetrachloride, ethylene dichloride, gasoline, toluene, and/or air compressor systems using synthetic fire-resistant lubricants.
Expertly Selected Product Pairings
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 7D713 | FRL,3/8 In. NPT,60 cfm, |
 | UNSPSC CODES | 27131604 | |
 | VMRS (ATA) CODES | 053-008-004 | FRL,3/8 In. NPT,60 cfm, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here