Share  
Print  
DAYTON

Centrifugal Pump: 1 hp HP, 115/230, 90 gpm @ 5 ft, 65 ft Max. Head, 1-1/2 in NPT, 1 Phase

Hover over image to magnify
Pump, 1 Hp, 115/230V, 14.0/7.0
Pump, 1 Hp, 115/230V, 14.0/7.0

#918942-7 | Pkg Qty: 1

$809.53 pkg | $809.53 ea

Drop Ship Item

Shipping to 60045
|

Technical Specifications

Key Specifications
Agency Compliance
CUS
Maximum Case Pressure
150 psi
Amps
14.0/7.0
Maximum Diameter Solids
1/8 in.
Bearing Type
Ball
Maximum Fluid Viscosity
31 SSU
Best Efficiency GPM @ Head
48 gpm @ 40 ft.
Maximum GPM @ Head
90 gpm @ 5 ft.
Best Efficiency Range GPM @ Head
21 to 66 GPM @ 50 to 20 ft.
Maximum Head
65 ft.
Brand
DAYTON
Maximum Liquid Temperature
200°F
Drain Plug
No
Maximum Specific Gravity
1
Duty
Continuous
Mfr. Part Number
4JMV7
Frame
56J
Mfr. Warranty Length
1 yr.
GPM of Water @ 10 Ft. of Head
84
Minimum GPM @ Head
8 gpm @ 60 ft.
GPM of Water @ 15 Ft. of Head
79
Motor Enclosure
ODP
GPM of Water @ 150 Ft. of Head
79
Motor RPM
3450
GPM of Water @ 20 Ft. of Head
77
Motor Type
PSC
GPM of Water @ 25 Ft. of Head
70
NEMA/IEC Frame
56J
GPM of Water @ 30 Ft. of Head
57
Outlet
1-1/4 in. NPT
GPM of Water @ 40 Ft. of Head
48
Package Quantity
1
GPM of Water @ 5 Ft. of Head
90
Phase
1
GPM of Water @ 50 Ft. of Head
24
Port Rotation
90° Increments
GPM of Water @ 60 Ft. of Head
8
RPM
3450
Height
7-7/8 in.
Screw Material
Stainless Steel
Horsepower
1
Seal Material
Carbon, Ceramic, Stainless Steel, Viton
Housing Material
304 Stainless Steel
Seal Type
Mechanical
Hz
60
Service Factor
1.3
Impeller Material
304 Stainless Steel
Shaft Material
Stainless Steel
Impeller Type
Closed
Shipping Weight
37 lb.
Inlet
1-1/2 in. NPT
Type
Chemical Resistant
Inlet Pressure
122 psi
Voltage
115/230
Inlet Type
1-1/2 in. NPT
Wetted Materials
304 Stainless Steel, Carbon, Ceramic, Viton
Item
Centrifugal Pump
Width
6-9/16 in.
Length
14-1/4 in.
General
Application
Chemical Processing, Circulation, Cooling, Liquids Transfer, Pressure Boosting and Circulating
Includes
Manual
For Use With
Clear, Non-Flammable/Non-Abrasive Liquids Compatible with Pump Components
Max. Dia. Solids
1/8 in
HP
1 hp
Max. Liquid Temp.
200 Degrees F

Product Description

Stainless Steel Centrifugal Pumps are designed for continuous duty and are intended for use with clear, non-abrasive and nonflammable liquids compatible with the pump material make-up. These pumps are a non-self priming, gravity feed design; they will pull water a maximum of 15 ft. with the pump and suction line completely filled with water and a foot valve on the end of the suction line. Pumps operate with a 3450RPM motor. Single phase pump motors have thermal protection; it automatically shuts off with sudden rises in temperature and restarts after cooling down. All models are manual mode and require field wiring, no controls are supplied. Check motor wiring before putting units into operation (see motor nameplate for specific wiring diagram)

Expertly Selected Product Pairings

Pump Shaft Seal Kit, Seal Type
$81.57 pkg | $81.57 ea
Item: 916017-8 | Pkg Qty: 1

Compliance & Restrictions

California Proposition 65 Icon
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
9189427
Pump, 1 Hp, 115/230V, 14.0/7.0
 NameItemDescription
Grainger DropshipGrainger Dropship4JMV7Pump, 1 HP, 115/230V, 14.
UNSPSC CODESUNSPSC CODES40151503
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Pump, 1 HP, 115/230V, 14.

For more product information by email, click here