Home All Products SKU: 918658-2
Share  
Print  
EATON AEROQUIP

Hydraulic Hose Assembly: 3/8 in x 3/8 in Fitting Size, M Coupler x M Coupler, Rubber, 6 ft Hose Lg

Hover over image to magnify
Hose,High Pressure,6ft
Hose,High Pressure,6ft

#918658-2 | Pkg Qty: 1

$134.67 pkg | $134.67 ea

Drop Ship Item

Shipping to 60045
|

Technical Specifications

Key Specifications
Brand
EATON AEROQUIP
Item
Hydraulic Hose Assembly
Fitting Size
3/8 in. x 3/8 in.
Mfr. Part Number
HC-9206C
Fitting Type
M Coupler x M Coupler
Pack Quantity
1
Hose Length
6 ft.
Shipping Weight
6 lb.
General
Compatible Chemicals
Air, Automatic Transmission Fluid, Diesel Fuel, Ethylene Glycol, Fresh Water, Fuel Oil, Gasoline, Hydraulic Fluid (Petroleum), Hydraulic Fluid (Synthetic), Kerosene, Lithium Grease, Lubricated Air, Mineral Oil, Motor Oil, Salt Water
Hose Inside Dia.
1/4 in
For Media Type
Air, Automatic Transmission Fluid, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydraulic Fluid, Kerosene, Lithium Grease, Lubricated Air, Mineral Oil, Motor Oil, Water
Hose Reinforcement Material
Carbon Steel
For Use With
10,000 PSI Pumps and Cylinders
Hose Reinforcement Type
Braid
Hose Configuration
Coupled Assembly
Hose Tube Material
Rubber
Hose Cover Material
Synthetic Rubber
Includes
(2) 3/8" Male Coupler
Hose Fitting A Material
Carbon Steel
Max. Working Pressure @ 70 F
10,000 psi
Hose Fitting A Type
M Quick Disconnect
Not Recommended Chemicals
0, Acetic Acid (Glacial), Acetic Acid 20%, Acetic Acid 80%, Acetone, Antifreeze (Coolant), Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Citric Acid 50%, Ethyl (Ethanol), Formic Acid, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Isopropyl (Isopropanol), Methyl (Methanol), Methyl Ethyl Ketone (MEK), Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Phosphoric Acid (40% Solution), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%)
Hose Fitting B Material
Carbon Steel
Safety Factor
1899-12-31 02:01:00
Hose Fitting B Type
M Quick Disconnect
Standards
MHI 1J100, MSHA APPROVED
Hose Fittings
Carbon Steel 3/8 in M Coupler x Carbon Steel 3/8 in M Coupler
Temp. Range
-40 Degrees to 212 Degrees F

Product Description

These Eaton Aeroquip FC579 hydraulic hose assemblies are suitable for high-pressure applications and have crimped-on rubber strain relief on their ends that helps extend the hoses' life. They have an abrasion-resistant SBR (styrene-butadiene rubber) tube and cover and are reinforced with two layers of steel wire braids for strength. The hose exhibits low volumetric expansion under pressure, which helps maintain the efficiency of the hydraulic system. These hydraulic hose assemblies are used for hydraulic jacking applications with petroleum- and water-based fluids. They come with fittings installed on both ends and are ready to connect to compatible equipment.

Hydraulic hose assemblies come with fittings installed on both ends for connecting the hoses to compatible equipment. Hydraulic hoses are used for transferring fluids in petroleum- and water-based hydraulic systems commonly found on industrial, mining, and manufacturing equipment. These hoses are reinforced to maximize their strength.

Item Barcode
9186582
Hose,High Pressure,6ft
 NameItemDescription
Grainger DropshipGrainger Dropship3KD66Hose,High Pressure,6ft
UNSPSC CODESUNSPSC CODES40142005
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Hose,High Pressure,6ft

For more product information by email, click here