Share
Print
APPROVED SUPPLIER
#12-24 Machine Screw, Flat, Phillips, Carbon Steel, Zinc Plated, 1/2" Length, PK 100
Hover over image to magnify
#917841-3 | Pkg Qty: 100
$5.61 pkg | $0.06 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Basic Material
Steel
Machine Screw Head Type
Flat
Brand
APPROVED SUPPLIER
Material
Carbon Steel
Driver Size
#3
Meets/Exceeds
ANSI B18.6.3
Fastener Head Height
0.112 in.
Mfr. Part Number
U24670.021.0050
Finish
Zinc Plated
Pack Quantity
100
Head Angle
82 deg.
Point Size
Machine Srew Flat Countersunk Phillips
Head Diameter Range
0.380 in.
Rockwell Hardness
B69 to B100
Item
Machine Screw
Shipping Weight
.63 lb.
Length
1/2 in.
System of Measurement
Fractional
Machine Screw Drive Type
Phillips
Thread Size
#12-24
General
Maximum Head Height
0.132 in
Minimum Head Width
0.38 in
Maximum Head Width
0.412 in
Thread Fit
3A/2A
Minimum Head Height
0.112 in
Product Description
Flat-Head Machine Screws
- 82° head angle 18-8 stainless steel and brass screws are RoHS compliant
- Meet ANSI/ASME B18.6.3 standard.
- Note: Bulk quantities of some sizes and nylon available.
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Ph Fl MS 12-24 X 1/2
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 1MY20 | Mach Scr, Flat,PK100 |
 | UNSPSC CODES | 31161504 | |
 | VMRS (ATA) CODES | 053-007-006 | Mach Scr, Flat,12-24x1/ |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here