Share
Print
GOULDS WATER TECHNOLOGY
Effluent Pump, HP 1/2, 120VAC, Continuous Duty Cycle, Max. Head 61.0 ft.
Hover over image to magnify
#917761-2 | Pkg Qty: 1
$1,180.43 pkg | $1,180.43 ea
This item requires special shipping, additional charges may apply.
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
UL 778, CSA C22.2 108
Impeller Material
Cast Iron
Amps
14.5 A
Input Phase AC
1
Base Material
Cast Iron
Item
Submersible Effluent Pump
Bearing Type
Ball
Length
8-1/2 in.
Brand
GOULDS WATER TECHNOLOGY
Maximum Diameter Solids
3/4 in.
Cord Length
20 ft.
Maximum Head
61 ft.
Diameter
11-1/2 in.
Maximum Liquid Temperature
140°F
Discharge NPT
2 in.
Maximum Temperature (Deg. F)
140
Duty
Continuous
Mechanical Seal
Stainless Steel/Silicon Carbide/Buna-N
GPM of Water @ 10 Ft. of Head
58
Mfr. Part Number
WE0511HH
GPM of Water @ 100 Ft. of Head
16
Minimum Sump Pit Diameter
18 in.
GPM of Water @ 15 Ft. of Head
53
Motor RPM
3450
GPM of Water @ 20 Ft. of Head
49
Motor Type
Oil Filled Capacitor Start
GPM of Water @ 25 Ft. of Head
45
Operation Type
Manual
GPM of Water @ 30 Ft. of Head
41
Package Quantity
1
GPM of Water @ 35 Ft. of Head
35
Phase
1
GPM of Water @ 40 Ft. of Head
30
Pump Body Material
Cast Iron
GPM of Water @ 45 Ft. of Head
25
Pump HP
1/2
GPM of Water @ 5 Ft. of Head
62
Pump RPM
3450
GPM of Water @ 50 Ft. of Head
18
Pump Type
Manual Operation (Switch Not Included)
GPM of Water @ 55 Ft. of Head
10
RPM
3450
GPM of Water @ 60 Ft. of Head
2
Shaft Material
Stainless Steel
GPM of Water @ 70 Ft. of Head
56
Shaft Seal
Stainless Steel, Buna-N, Silicon Carbide
GPM of Water @ 80 Ft. of Head
45
Shaft Seal Material
Buna-N, Silicon Carbide, Stainless Steel
GPM of Water @ 90 Ft. of Head
30
Shipping Weight
71.6 lb.
Handle
Yes
Switch Type
None
Height
16 in.
Thermal Protection
Thermal Protection
Horsepower
1/2
Top Material
Cast Iron
Housing
Cast Iron
Type
Manual Operation (Switch Not Included)
Housing Material
Cast Iron
Voltage
120 VAC
Hz
60
Width
8-1/2 in.
General
Body Dia.
11 3/4 in
Min. Sump Pit Dia.
18 in
Discharge Dia.
2 in
Minimum Water Depth
18 in
Discharge Gender
Female
Nominal Voltage
110V AC
Discharge Standard
NPT
Phase - Pumps
1
Flow Rate @ 10 Ft. of Head
58 gpm
Rated Voltage
120V AC
Flow Rate @ 15 Ft. of Head
53 gpm
Shaft Seal Material - Pumps
Nitrile Rubber, Silicon Carbide, Stainless Steel
Flow Rate @ 20 Ft. of Head
50 gpm
Standards
UL 778, CSA C22.2 108
Flow Rate @ 40 Ft. of Head
30 gpm
Switch Actuation
No Switch Included
Flow Rate @ 60 Ft. of Head
2 gpm
Switch Electrical Connection
No Switch Included
Includes
1-1/2" FNPT Flange
Width at Widest Point
8 1/2 in
Product Description
These 110 to 120V effluent pumps are used to drain treated water containing small solids from septic tanks and out to a drain field. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Documents
Item Barcode
Submersible Effluent Pump,1/
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 2NVC1 | Submersible Effluent |
 | UNSPSC CODES | 40151510 | |
 | VMRS (ATA) CODES | 053-006-009 | Submersible Effluent |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here