Share
Print
DAYTON
Effluent Pump, HP 2, 240 VAC, Intermittent Duty Cycle, Max. Head 86.0 ft.
Hover over image to magnify
#917741 | Pkg Qty: 1
$1,890.09 pkg | $1,890.09 ea
This item requires special shipping, additional charges may apply.
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Amps
10.9
Length
17-21/64
Base Material
Cast Iron
Maximum Diameter Solids
3/4 in.
Bearing Type
Ball
Maximum Head
86 ft.
Body Material
Cast Iron
Maximum Liquid Temperature
104°F
Brand
DAYTON
Maximum Temperature (Deg. F)
104
Cord Length
20 ft.
Mechanical Seal
SiC
Diameter
13-7/16 in.
Mfr. Part Number
4LE14
Discharge
2 in.
Minimum Sump Pit Diameter
18 in.
Discharge NPT
2 in.
Motor RPM
3450
Duty
Intermittent
Motor Type
Oil Filled PSC
Duty Cycle
Intermittent
Operation Type
Manual
GPM of Water @ 40 Ft. of Head
100
Overall Height
17-5/16 in.
GPM of Water @ 45 Ft. of Head
90
Package Quantity
1
GPM of Water @ 50 Ft. of Head
80
Phase
1
GPM of Water @ 55 Ft. of Head
71
Pump Body Material
Cast Iron
GPM of Water @ 60 Ft. of Head
62
Pump HP
2
GPM of Water @ 70 Ft. of Head
32
Pump RPM
3450
GPM of Water @ 80 Ft. of Head
10
Pump Type
Manual Operation (Switch Not Included)
Handle
Yes
RPM
3450 RPM
Height
17-5/16 in.
Shaft Seal
Silicon Carbide
Horsepower
2
Shaft Seal Material
Silicone Carbide
Housing
Cast Iron
Shipping Weight
94.2 lb.
Housing Material
Cast Iron
Switch Type
None
Hz
60 Hz
Top Material
Cast Iron
Impeller Material
Polypropylene
Type
Manual Operation (Switch Not Included)
Input Phase AC
1
Voltage
240 VAC
Item
Submersible Effluent Pump
Width
13-1/2 in.
General
Body Dia.
13 7/16 in
Nominal Voltage
220V AC
Discharge Dia.
2 in
Phase - Pumps
1
Flow Rate @ 40 Ft. of Head
100 gpm
Rated Voltage
240V AC
Flow Rate @ 60 Ft. of Head
62 gpm
Shaft Seal Material - Pumps
Silicone Carbide
Flow Rate @ 80 Ft. of Head
10 gpm
Switch Actuation
No Switch Included
HP
2
Switch Electrical Connection
No Switch Included
Min. Sump Pit Dia.
18 in
Width at Widest Point
13 1/2 in
Minimum Water Depth
18 in
Product Description
These single-phase 200 to 240V effluent pumps use a higher voltage that allows for larger motors that require less current than lower-voltage motors. They are used to drain treated water containing small solids from septic tanks and out to a drain field.
Expertly Selected Product Pairings
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Pump,Effluent,2 Hp
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 4LE14 | Pump, Effluent,2 HP |
 | UNSPSC CODES | 40151512 | |
 | VMRS (ATA) CODES | 053-006-009 | Pump, Effluent,2 HP |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here