Share  
Print  
DAYTON

Dayton Tubeaxial Fan: Clean Air, 36 in Blade, 60 sones Max Noise Level @ 5 Feet, Belt Drive

Hover over image to magnify
Tubeaxial Fan,52-7/8 In. H,39-
PI_Asset_948200
Tubeaxial Fan,52-7/8 In. H,39-
PI_Asset_948200

#917332-7 | Pkg Qty: 1

$2,782.96 pkg | $2,782.96 ea
This item requires special shipping, additional charges may apply.

Drop Ship Item

Shipping to 60045
|

Technical Specifications

Key Specifications
Blade Diameter
36 in.
Mounting Position
Vertical/Horizontal
Blade Material
Aluminum
Number of Blades
6
Brand
DAYTON
Package Quantity
1
Height
52-7/8 in.
Shipping Weight
241 lb.
Item
Tubeaxial Fan
Width
39-3/4 in.
Mfr. Part Number
166209A
General
Assembly
Fully Assembled
Maximum Inlet Air Temperature
200 Degrees F
Body Diameter
36 5/8 in
Maximum Motor Horsepower
5 hp
Bolt Circle Diameter
38 1/4 in
Maximum Motor Speed
1,133 RPM
Brake Horsepower
4 1/2 hp
Maximum Noise Level @ 5 Feet
60 sones
Center Height
22 1/2 in
Maximum Static Pressure
1 in wc
Compatible Flange Part Number
3C442
Minimum Airflow
12,520 cfm
For Air Type
Clean Air
Minimum Motor Horsepower
1 hp
For Airflow (Dependent on Motor)
12,520 cfm to 20,650 cfm
Minimum Motor Speed
687 RPM
For Fan Speed (Motor Sold Separately)
687 RPM to 1,133 RPM
Propeller Shaft Diameter
1 1/4 in
For Motor Horsepower (Motor Sold Separately)
1 hp to 5 hp
Replacement Fan Blade Part Number
3C420
Includes
Belt Guard
Resistance Properties
Rust Resistant
Maximum Airflow
20,650 cfm
Spark Resistant Construction Type
B
Maximum Ambient Temperature
104 Degrees F
Standards
AMCA
Maximum Fan Speed
1,133 RPM

Product Description

Belt-Drive Tubeaxial Fans

  • Mount: vertical or horizontal Permanently lubricated ball bearings Max. inlet air temperature: 200°F Max. ambient: 104°F Precision-balanced, spark-resistant aluminum blades Belt guards AMCA Type B spark-resistant propellers (99-0401-86) Optional companion flanges are sold in pairs
  • Streamlined belt tunnel ventilates the drive compartment with air from outside the fan. Steel housing is iron phosphate-processed for rust protection; baked enamel paint finish. Factory installed cast-iron sheave is assembled on fan shaft. Motors and belts are packed separately when complete fan with drive package is ordered.
  • Note: These fans cannot be used if the environment surrounding them is not always free of flammable gases, vapors, or liquids; combustible dust; or ignitable fibers or flyings. Installation must comply with all local and national safety codes including the National Electrical Code (NEC) and the National Fire Protection Act (NFPA). OSHA complying guards are required when fan is installed within 8 ft. of floor or working level, or within reach of personnel. Review OSHA Codes and UL Standards.

Expertly Selected Product Pairings

Bearing
$151.92 pkg | $151.92 ea
Item: 925816-7 | Pkg Qty: 1
Neoprene Ring
$96.71 pkg | $96.71 ea
Item: 925816-8 | Pkg Qty: 1

Item Barcode
9173327
Tubeaxial Fan,52-7/8 In. H,39-
 NameItemDescription
Grainger DropshipGrainger Dropship3C414Tubeaxial Fan,52-7/8
UNSPSC CODESUNSPSC CODES40101604
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Tubeaxial Fan,52-7/8

For more product information by email, click here