Share
Print
DAYTON
12 VDC Centrifugal Pump-Phase, 3/4" NPT Inlet Size
#917318-3 | Pkg Qty: 1
$349.01 pkg | $349.01 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Amps
8.5 A
Maximum Diameter Solids
1/8 in.
Bearing Type
Ball
Maximum Fluid Viscosity
31 SSU
Bearings
Ball
Maximum GPM @ Head
21 @ 0 ft.
Best Efficiency GPM @ Head
11 gpm @ 15 ft.
Maximum Head
17 ft.
Best Efficiency Range GPM @ Head
3 to 16 gpm @ 20 to 10 ft.
Maximum Liquid Temperature
180°F
Brand
DAYTON
Maximum Pressure
9.5 psi
Drain Plug
1/8 in. NPT
Maximum Specific Gravity
1
Duty
Intermittent
Mfr. Part Number
5PXX0
Duty Cycle
Intermittent
Mfr. Warranty Length
1 yr.
GPH of Water @ 5 Ft. of Head
660
Minimum GPM @ Head
3 @ 20 ft.
GPM @ 1 Ft. of Head
12.6
Motor Enclosure
Closed
GPM @ 7 Feet of Head
9.8
Motor RPM
5000
GPM of Water @ 0 Ft. of Head
13
Motor Type
DC
GPM of Water @ 10 Ft. of Head
8
Outlet Size
3/4 in. NPT
GPM of Water @ 15 Ft. of Head
4
Pack Quantity
1
GPM of Water @ 2 Ft. of Head
12.2
Port Rotation
180 Degree Increments
GPM of Water @ 20 Ft. of Head
3
Screw Material
Stainless Steel
GPM of Water @ 3 Ft. of Head
11.7
Seal Application
Non-Flammable Liquids Compatible with Pump Components
GPM of Water @ 5 Ft. of Head
11
Seal Material
Carbon/Ceramic, Viton, Stainless Steel
Height
3-3/8 in.
Seal Type
Mechanical
Horsepower
1/8
Service Factor
1.16
Housing Material
Stainless Steel
Shaft Material
Stainless Steel
Impeller Material
Stainless Steel
Shaft Size
5/16 in.
Impeller Type
Semi Open
Shipping Weight
5.35 lb.
Inlet
3/4 in. NPT
Type
Centrifugal
Inlet Pressure
6.5 psi
Voltage
12 VDC
Item
Straight Centrifugal High Flow Pump
Volute Material
Stainless Steel
Length
7-1/8 in.
Wetted Materials
Bronze, Carbon, Ceramic, Buna N, Viton, Stainless Steel
Liquid Compatibility
Nonflammable, Non Abrasive
Width
4-5/16 in.
Maximum Case Pressure
200 psi
General
Application
Pumps are suitable for dewatering and liquid transfer
where there are non-abrasive non flammable liquids compatible with the pump material make-up.
Maximum Feet of Head
17 ft
Best Efficiency Head
15 ft
Maximum Media Temperature
180 Degrees F
Compatible Intake Pipe Size
3/4 in
Minimum Media Temperature
40 Degrees F
Discharge Rotation
180 Degrees Increments
Motor Ambient Temperature (Maximum)
104 Degrees F
Discharge Type
NPT
Nameplate Voltage
12V DC
For Use With
Non-Flammable Liquids Compatible with Pump Component Materials
Shut Off Pressure (Maximum)
10 psi
Impeller Design
Semi-Open
Solid Diameter (Maximum)
0.13 in
Includes
Manual
Specific Gravity (Maximum)
1
Intake Type
NPT
Wetted Material
Bronze, Buna-N, Carbon, Ceramic, Stainless Steel, Viton
Intake and Discharge Size
3/4 in , 3/4 in
Product Description
Dayton DC Centrifugal Pumps are suitable for dewatering and liquid transfer where there are non-abrasive non flammable liquids compatible with the pump material make-up. The units produce high flow rates under low-head conditions. These units are manual units, no controls are supplied. All pumps feature a mechanical seal.
Expertly Selected Product Pairings
$5.67 pkg | $5.67 ea
$4.53 pkg | $4.53 ea
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Centrifugal Pump, 12 Vdc, 8.5
Name | Item | Description | |
---|---|---|---|
Grainger Dropship | 5PXX0 | Centrifugal Pump, 12 VDC, | |
UNSPSC CODES | 40151503 | ||
VMRS (ATA) CODES | 053-006-009 | Centrifugal Pump, 12 VDC, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here