Share
Print
DAYTON
3-Phase Sewage/Trash Centrifugal Pump, 5 HP, 208 to 230/460VAC, 105 ft. Max. Head
Hover over image to magnify
#916347-2 | Pkg Qty: 1
$2,827.91 pkg | $2,827.91 ea
This item requires special shipping, additional charges may apply.
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
cULus
Maximum Diameter Solids
1
Amps
13.4-12.6/6.3 A
Maximum Fluid Viscosity
100 SSU
Bearing Type
Ball
Maximum Head
105
Best Efficiency GPM @ Head
93 @ 66 ft.
Maximum Specific Gravity
1
Brand
DAYTON
Mfr. Part Number
12N806
Drain Plug
3/4 in. NPT
Mfr. Warranty Length
1 yr.
Duty
Continuous
Minimum GPM @ Head
12 gpm @ 100 ft.
Frame
184JM
Motor Design
3-Phase
GPM of Water @ 20 Ft. of Head
148
Motor Enclosure
TEFC
GPM of Water @ 25 Ft. of Head
144
Motor RPM
3450
GPM of Water @ 30 Ft. of Head
139
Motor Type
3 Phase
GPM of Water @ 40 Ft. of Head
128
NEMA/IEC Frame
184JM
GPM of Water @ 50 Ft. of Head
116
Outlet Size
2 in. NPT
GPM of Water @ 60 Ft. of Head
103
Package Quantity
1
GPM of Water @ 70 Ft. of Head
85
Phase
3
GPM of Water @ 80 Ft. of Head
65
Port Rotation
None
GPM of Water @ 90 Ft. of Head
40
Screw Material
Zinc Plated
Height
9-9/64 in.
Seal Material
Carbon/Ceramic/Buna-N
Horsepower
5
Seal Type
Mechanical
Housing Material
Cast Iron
Self-Priming
Yes
Hz
60
Service Factor
1-1/4
Impeller Material
Stainless Steel CF8M
Shaft Material
Steel
Impeller Type
Semi-Open
Shipping Weight
159 lb.
Inlet
2
Voltage
208 to 230/460 VAC
Inlet Pressure
15 psi
Volute Material
Cast Iron
Item
Sewage/Trash Centrifugal Pump
Wetted Materials
CI, SS, Carbon,Ceramic,Buna-N
Length
24-13/16 in.
Width
10-61/64 in.
Maximum Case Pressure
60 psi
General
Application
Process, Liquid Transfer, Irrigation, Clear or Gray Water and Sewage Treatment
Maximum Feet of Head
105 ft
Best Efficiency Head
66 ft
Maximum Media Temperature
160 Degrees F
Compatible Discharge Pipe Size
2 in
Minimum Media Temperature
40 Degrees F
Compatible Intake Pipe Size
2 in
Motor Ambient Temperature (Maximum)
104 Degrees F
Compatible with Media Type
Sewage
Motor Ambient Temperature (Minimum)
104 Degrees F
Discharge Type
NPT
Motor Enclosure Type
TEFC
Feet of Head (Minimum)
20 ft
Motor Frame Designation
184JM
Flow Rate @ 20 ft of Head (Maximum)
148 gpm
NPSHr
15 psi
Flow Rate @ 40 ft of Head (Maximum)
128 gpm
Nameplate Voltage
208-230/460V AC
Flow Rate @ 60 ft of Head (Maximum)
103 gpm
Priming
Self-Priming
Flow Rate @ 80 ft of Head (Maximum)
65 gpm
Pump Housing Material
Cast Iron
For Use With
Water and Nonflammable Liquids Compatible with Pump Component Materials
Pumping Application
Clear or Gray Water, Irrigation, Liquid Transfer, Sewage Treatment
Impeller Design
Semi-Open
Requires Control Panel
Yes
Includes
Strainer
Solid Diameter (Maximum)
1 in
Intake Type
NPT
Specific Gravity (Maximum)
1
Intake and Discharge Size
2 in , 2 in
Suction Lift (Maximum)
20 ft
Manufacturer Warranty Length
1 yr
Wetted Material
Buna-N, Carbon, Ceramic, CI, Stainless Steel
Product Description
Dayton self-priming (to 20 ft. lift) sewage/trash pumps are close-coupled to continuous duty motors and designed to be installed in a stationary application. Pumps are utilized for Industrial and Commercial facilities.
Expertly Selected Product Pairings
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Sewage/Trash Pump,5 Hp
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 12N806 | Sewage/Trash Pump,5 HP |
 | UNSPSC CODES | 40151517 | |
 | VMRS (ATA) CODES | 053-006-009 | Sewage/Trash Pump,5 HP |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here