Share
Print
DAYTON
Dayton Panel Exhaust Fan: Direct Drive, 24 in Blade, 3/4 hp, 6,317 cfm, 115/208-230V AC, 1 ph
Hover over image to magnify
#915969-1 | Pkg Qty: 1
$1,616.43 pkg | $1,616.43 ea
This item requires special shipping, additional charges may apply.
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
UL and cUL Listed, AMCA, CSA Certified Motor
Motor HP
3/4
Bearing Type
Ball
Mounting Position
Vertical or Horizontal
Blade Diameter
24 in.
Number of Blades
3
Blade Material
Aluminum
Package Quantity
1
Brand
DAYTON
Phase
1
Height
28 in.
Shaft Diameter
5/8 in.
Item
Panel Exhaust Fan
Shipping Weight
70 lb.
Mfr. Part Number
10E005
Voltage
115/208-230 VAC
Motor Enclosure
Explosion Proof Fan Cooled
Width
28 in.
General
Assembled
Fully Assembled
Maximum Exhaust Airflow @ 0.000 in SP
0 to 10,000 cfm
Enclosure Design
Totally Enclosed Motor
Maximum Inlet Temperature
104 Degrees F
Exhaust Airflow @ 0.000 in SP
6,317 cfm
Maximum Noise Level
28 sones
Exhaust Airflow @ 0.125 in SP
5,851 cfm
Maximum Noise Level @ 0.000 in SP @ 5 ft
Greater than 50 sones
Exhaust Airflow @ 0.250 in SP
5,314 cfm
Motor Enclosure Design
Totally Enclosed Fan Cooled (TEFC)
Exhaust Airflow @ 0.375 in SP
4,729 cfm
Motor Horsepower
3/4 hp
Exhaust Airflow @ 0.500 in SP
4,117 cfm
Motor Speed
1,750 RPM
Fan Style
Panel
Motor Speed Range
1601 to 1800 RPM
Fan Voltage
115/208-230V AC
Nameplate Voltage
115/208-230V AC
For Cut-Out Length
26 1/2 in
Noise Level @ 0.000 in SP @ 5 ft
28 sones
For Cut-Out Width
26 1/2 in
Noise Level @ 0.125 in SP @ 5 ft
27 sones
For Use With
NEC Class I, Div 1, Group C and D; NEC Class II, Div 1, Group F and G
Nominal Voltage
115/208-230V AC
Full Load Current
10.6 A
Number of Fans
1
Includes Motor
Yes
Vent Design
Ductless
Manufacturer Warranty Length
1 yr
Ventilation Type
Exhaust
Maximum Airflow
6,317 cfm
Venturi Depth
4 in
Maximum Ambient Operating Temperature
104 Degrees F
Venturi Diameter
24 1/2 in
Product Description
Hazardous Location Direct-Drive Exhaust Fans
- Mount: vertical or horizontal Motors: explosionproof, fan-cooled enclosure with Class B insulation Hazardous location ball bearings Max. ambient temp.: 104°F
- Fans ventilate spaces containing flammable or explosive vapors, gases, or dusts (per NEC 500). For use with NEC Class I, Division I, Groups C and D; NEC Class II, Division I, Groups F and G (No. 10E020 for Groups E, F, and G). Galvanized frame and finish. Spark-resistant aluminum propellers. Motorized damper and shutters are not recommended.
- UL and C-UL Listed.
- Note:
- OSHA complying guards are required when a fan is installed within 8 ft. of floor, working level, or within reach of personnel. Not for use with hazardous location exhaust applications. Review OSHA codes and UL standards. See index under Guards, Fan. Consult local ventilation contractor or fire inspector for local code requirements. Do not use where motor or blades will accumulate paint residue. Electrically ground all components in hazardous location system.
Compliance & Restrictions
Shipping Exclusions: NJ
Item Barcode
Exhaust Fan,24 In,Hazardous
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 10E005 | Exhaust Fan, 24 In, |
 | UNSPSC CODES | 40101502 | |
 | VMRS (ATA) CODES | 053-006-009 | Exhaust Fan, 24 In, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here