Share
Print
DAYTON
120/240 VAC Open Dripproof Straight Center Discharge Pump, 1-Phase, 1-1/4" NPT Inlet Size
#915573-8 | Pkg Qty: 1
$865.79 pkg | $865.79 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Amps
14.8/7.4 A
Maximum GPM @ Head
60 @ 20 ft.
Bearing Type
Ball
Maximum Head
113 ft.
Best Efficiency GPM @ Head
38 @ 80 ft.
Maximum Liquid Temperature
140°F
Best Efficiency Range GPM @ Head
23 to 48 gpm @ 98 to 54 ft.
Maximum Pressure
125 psi
Brand
DAYTON
Maximum Specific Gravity
1
Drain Plug
Easily Accessible
Mfr. Part Number
4RU78
Frame
48Y
Mfr. Warranty Length
1 yr.
GPM of Water @ 100 Ft. of Head
22
Minimum GPM @ Head
13 gpm @ 110 ft.
GPM of Water @ 20 Ft. of Head
60
Motor Enclosure
ODP
GPM of Water @ 30 Ft. of Head
56
Motor RPM
3450
GPM of Water @ 40 Ft. of Head
53
NEMA/IEC Frame
48Y
GPM of Water @ 50 Ft. of Head
49
Number of Port Positions
4
GPM of Water @ 60 Ft. of Head
45
Outlet
1 in. NPT
GPM of Water @ 70 Ft. of Head
40
Outlet Size
1 in. NPT
GPM of Water @ 80 Ft. of Head
36
Package Quantity
1
GPM of Water @ 90 Ft. of Head
29
Phase
1
Height
8-5/8 in.
Port Rotation
4 Positions
Horsepower
1
Seal Application
Water
Housing Material
Cast Iron
Seal Material
Buna-N Elastomers, Carbon/Ceramic Face, 316 Stainless Steel Metal Parts
Hz
60
Seal Type
Type 21
Impeller Material
Noryl
Service Factor
1-1/4
Impeller Type
Closed
Shaft Material
Stainless Steel
Inlet
1-1/4 in. NPT
Shipping Weight
35 lb.
Item
Straight Center Discharge Pump
Type
High Head
Length
12-7/8 in.
Voltage
120/240 VAC
Liquid Compatibility
Nonflammable, Non Abrasive
Wetted Materials
Stainless Steel, Carbon, Cast Iron, Noryl, Ceramic, Buna-N
Maximum Case Pressure
100 psi
Width
7-13/16 in.
Maximum Fluid Viscosity
1 cP
General
Best Efficiency Flow
35 gpm
Intake Type
NPT
Best Efficiency Head
54 to 98 ft
Intake and Discharge Size
1 1/4 in , 1 in
Compatible Discharge Pipe Size
1 in
Maximum Feet of Head
113 ft
Compatible Intake Pipe Size
1 1/4 in
Maximum Media Temperature
140 Degrees F
Discharge Pressure
Straight Center Discharge Pump
Motor Enclosure Type
ODP
Discharge Rotation
90 Degrees Increments
Motor Frame Designation
48Y
Discharge Type
NPT
Nameplate Voltage
115/230V AC
Flow Rate @ 100 ft of Head (Maximum)
22 gpm
Nominal Voltage
115/230V AC
Flow Rate @ 20 ft of Head (Maximum)
60 gpm
Priming
Manual
Flow Rate @ 40 ft of Head (Maximum)
53 gpm
Pump Housing Material
Cast Iron
Flow Rate @ 60 ft of Head (Maximum)
45 gpm
Shut Off Pressure (Maximum)
125 psi
Flow Rate @ 80 ft of Head (Maximum)
36 gpm
Specific Gravity (Maximum)
1
For Use With
Nonflammable and Nonabrasive Liquids
Suction Lift (Maximum)
25 ft
GPM of Water @ 110 Ft. of Head
13
Wetted Material
Buna-N, Carbon, Cast Iron, Ceramic, Noryl, Stainless Steel
Impeller Design
Closed
Product Description
Features replaceable case ring and easy-access housing drain plug. Does not have overload protection and requires a pump control box, sold separately. Replacement seals are also sold separately.
Expertly Selected Product Pairings
$20.72 pkg | $20.72 ea
$30.94 pkg | $30.94 ea
Item Barcode
Centrifugal Pump,1hp,1-Ph,115/
Name | Item | Description | |
---|---|---|---|
Grainger Dropship | 4RU78 | Centrifugal Pump,1hp,1- | |
UNSPSC CODES | 40151503 | ||
VMRS (ATA) CODES | 053-006-009 | Centrifugal Pump,1hp,1- |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here