Share  
Print  
DAYTON

Effluent Pump: 1/2, Tether Float, 31 ft Max. Head, 3/4 in Max. Dia Solids, 110V AC

Hover over image to magnify
Pump,Effluent,1/2 Hp
PI_Asset_958471
PI_Asset_958472
Pump,Effluent,1/2 Hp
PI_Asset_958471
PI_Asset_958472

#915549-5 | Pkg Qty: 1

$552.48 pkg | $552.48 ea

Drop Ship Item

Shipping to 60045
|

Technical Specifications

Key Specifications
Amps
9.4 A
Maximum Head
31 ft.
Base Material
Thermoplastic
Maximum Liquid Temperature
104°F
Bearing Type
Ball
Maximum Temperature (Deg. F)
104
Brand
DAYTON
Mechanical Seal
SiC/Buna
Cord Length
20 ft.
Mfr. Part Number
4HU73
Diameter
9-1/8 in.
Minimum Sump Pit Diameter
18 in.
Discharge NPT
1-1/2 in.
Motor RPM
3450
Duty
Intermittent
Motor Type
Oil Filled PSC
GPM of Water @ 10 Ft. of Head
78
Off Point
4-1/4 in.
GPM of Water @ 15 Ft. of Head
65
On Point
13-1/4 in.
GPM of Water @ 20 Ft. of Head
52
Operation Type
Automatic
GPM of Water @ 25 Ft. of Head
35
Package Quantity
1
GPM of Water @ 30 Ft. of Head
10
Phase
1
GPM of Water @ 5 Ft. of Head
85
Pump Body Material
Cast Iron
Gauge/Conductor
18/3
Pump HP
1/2
Handle
Yes
Pump RPM
3450
Height
13 in.
Pump Type
Automatic Operation (Switch Included)
Horsepower
1/2
RPM
3450
Housing
Cast Iron
Shaft Seal
Silicon Carbide/Buna N
Housing Material
Cast Iron
Shaft Seal Material
Carbon Ceramic
Hz
60
Shipping Weight
34.1 lb.
Impeller Material
Cast Iron
Switch Type
Tether
Input Phase AC
1
Top Material
Cast Iron
Item
Submersible Effluent Pump
Type
Automatic Operation (Switch Included)
Length
12-3/4 in.
Voltage
120 VAC
Maximum Diameter Solids
3/4 in.
Width
8-1/2 in.
General
Body Dia.
9 1/8 in
Nominal Voltage
110V AC
Discharge Dia.
1 1/2 in
Phase - Pumps
1
Flow Rate @ 10 Ft. of Head
78 gpm
Rated Voltage
120V AC
Flow Rate @ 15 Ft. of Head
65 gpm
Shaft Seal Material - Pumps
Carbon, Ceramic
Flow Rate @ 20 Ft. of Head
52 gpm
Switch Actuation
Tether Float
Min. Sump Pit Dia.
18 in
Switch Electrical Connection
Piggyback
Minimum Water Depth
18 in
Width at Widest Point
8 1/2 in

Product Description

These 110 to 120V effluent pumps are used to drain treated water containing small solids from septic tanks and out to a drain field. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.

Expertly Selected Product Pairings

Check Valve,Tpr,1-1/4 In. Or 1-
$23.57 pkg | $23.57 ea
Item: 915562 | Pkg Qty: 1

Compliance & Restrictions

California Proposition 65 Icon
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
9155495
Pump,Effluent,1/2 Hp
 NameItemDescription
Grainger DropshipGrainger Dropship4HU73Pump, Effluent,1/2
UNSPSC CODESUNSPSC CODES40151512
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Pump, Effluent,1/2

For more product information by email, click here