Share
Print
GOULDS WATER TECHNOLOGY
Effluent Pump, HP 1/2, 120VAC, Continuous Duty Cycle, Max. Head 46.0 ft.
Hover over image to magnify
#915043-6 | Pkg Qty: 1
$1,245.71 pkg | $1,245.71 ea
This item requires special shipping, additional charges may apply.
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
CSA C22.2 108, UL 778
Impeller Material
Cast Iron
Amps
14-1/2
Input Phase AC
1
Base Material
Cast Iron
Item
Submersible Effluent Pump
Bearing Type
Ball
Length
8-1/2 in.
Body Material
Cast Iron
Maximum Diameter Solids
3/4 in.
Brand
GOULDS WATER TECHNOLOGY
Maximum Head
46 ft.
Cord Length
20 ft.
Maximum Liquid Temperature
140°F
Diameter
11-1/2 in.
Maximum Temperature (Deg. F)
140
Discharge
2 in. FNPT
Mechanical Seal
Stainless Steel/Silicon Carbide/Buna-N
Discharge NPT
2 in.
Mfr. Part Number
WE0511H
Duty
Continuous
Minimum Sump Pit Diameter
18 in.
Duty Cycle
Continuous
Motor RPM
3450
GPM of Water @ 10 Ft. of Head
78
Motor Type
Oil Filled Capacitor Start
GPM of Water @ 100 Ft. of Head
16
Operation Type
Manual
GPM of Water @ 15 Ft. of Head
70
Overall Height
16 in.
GPM of Water @ 20 Ft. of Head
60
Package Quantity
1
GPM of Water @ 25 Ft. of Head
48
Phase
1
GPM of Water @ 30 Ft. of Head
34
Pump Body Material
Cast Iron
GPM of Water @ 35 Ft. of Head
30
Pump HP
1/2
GPM of Water @ 40 Ft. of Head
11
Pump RPM
3450
GPM of Water @ 45 Ft. of Head
5
Pump Type
Manual Operation (Switch Not Included)
GPM of Water @ 5 Ft. of Head
85
RPM
3450 RPM
GPM of Water @ 50 Ft. of Head
85
Shaft Material
Stainless Steel
GPM of Water @ 60 Ft. of Head
70
Shaft Seal
Stainless Steel, Buna-N, Silicon Carbide
GPM of Water @ 70 Ft. of Head
56
Shaft Seal Material
Buna-N, Silicon Carbide, Stainless Steel
GPM of Water @ 80 Ft. of Head
45
Shipping Weight
71 lb.
GPM of Water @ 90 Ft. of Head
30
Switch Type
None
Handle
Yes
Thermal Protection
Thermal Protection
Height
16 in.
Top Material
Cast Iron
Horsepower
1/2
Type
Manual Operation (Switch Not Included)
Housing
Cast Iron
Voltage
120 VAC
Housing Material
Cast Iron
Width
8-1/2 in.
Hz
60 Hz
General
Body Dia.
11 3/4 in
Minimum Water Depth
18 in
Discharge Dia.
2 in
Nominal Voltage
110V AC
Discharge Gender
Female
Phase - Pumps
1
Discharge Standard
NPT
Rated Voltage
120V AC
Flow Rate @ 10 Ft. of Head
78 gpm
Shaft Seal Material - Pumps
Nitrile Rubber, Silicon Carbide, Stainless Steel
Flow Rate @ 15 Ft. of Head
70 gpm
Standards
UL 778, CSA C22.2 108
Flow Rate @ 20 Ft. of Head
60 gpm
Switch Actuation
No Switch Included
Flow Rate @ 40 Ft. of Head
10 gpm
Switch Electrical Connection
No Switch Included
Includes
1-1/2" FNPT Flange
Width at Widest Point
8 1/2 in
Min. Sump Pit Dia.
18 in
Product Description
These 110 to 120V effluent pumps are used to drain treated water containing small solids from septic tanks and out to a drain field. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Documents
Item Barcode
Submersible Effluent Pump,1/
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 2NUZ8 | Submersible Effluent |
 | UNSPSC CODES | 40151510 | |
 | VMRS (ATA) CODES | 053-006-009 | Submersible Effluent |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here