Share  
Print  
DAYTON

Electric Operated Drum Pump: 1 hp Motor HP, 55 gal For Container Size, 32 gpm Max. Flow Rate

Hover over image to magnify
Drum Pump,115VAC,1 Hp,60 Hz
Drum Pump,115VAC,1 Hp,60 Hz

#914898-7 | Pkg Qty: 1

$1,401.68 pkg | $1,401.68 ea

Drop Ship Item

Shipping to 60045
|

Technical Specifications

Key Specifications
Adapter Diameter
2 in.
Metered
No
Adapter Material
Polypropylene
Mfr. Part Number
1DLP4
Adapter Type
Bung
Mfr. Warranty Length

Agency Compliance
ETL Recognized Component(Motor Only)
Motor Enclosure
ODP
Brand
DAYTON
Motor RPM
0-10,000
DEF Compatible
No
Motor Type
Electric AC Brush
Discharge Tube Length
6 ft.
Nozzle Material
Polypropylene
Discharge Tubing Material
PVC
Outlet Size
1" Barb
Duty Cycle
Intermittent
Overall Length
50 in.
Fits
2" Bung
Pack Quantity
1
Food Grade
No
Phase
1
For Use On
5, 15, 30 and 55 gal. Drums
Plug Type
NEMA 5-15-P
Full Load Amps
8-1/2
Power Source
Electric
GPM
32
RPM
10000
Gasket Material

Seal Material
Sealless
Height
39 in.
Self-Priming
Yes
Horsepower
1
Shipping Weight
21.6 lb.
Housing Material
CPVC
Suction Design
Constant
Hz
60
Suction Pipe Size
1.6 in.
Inlet Size
1.6"
Suction Tube Length
39 in.
Item
Electric Operated Drum Pump
Suction Tube Type
Centrifugal
Maximum Air Inlet PSI
16
Thermal Protection
Yes
Maximum GPM for Oil
7
Type
Motor and Tube
Maximum GPM for Water
15
Variable Speed
Yes
Maximum Head
36 ft.
Voltage
110 VAC
Maximum Liquid Temperature
190°F
Voltage @ 60 Hz
110
Maximum Pressure
16 psi
Wetted Materials
Carbon Graphite, CPVC, Hastelloy C-276, Polypropylene, PVC, PVDF, Viton
Maximum Viscosity
1500 CPS
pH Range

General
Adapter Connection Type
MNPT
Includes Suction Tube
Yes
Application
Chemical Transfer
Max. Flow Rate
32 gpm
Bung Connection Dia.
2 in
Max. Fluid Temp.
175 Degrees F
Compatible Chemicals
Calcium Chloride, Citric Acid 50%, Deionized Water, Fresh Water, Glycerin, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Nitric Acid (10% Solution), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hypochlorite/Bleach (to 20%), Sulfuric Acid (10% - 75%)
Max. Head - Pumps
36 ft
Discharge Connection Type
Hose Barb
Max. Head Pressure
16 psi
Discharge Tube Outlet ID
1 in
Max. Oil Flow
7 gpm
Discharge Tube Outlet OD
1 1/2 in
Max. Outlet Pressure
16 psi
For Container Size
55 gal
Noise Level
84 db
For Container Type
Drum
Nominal Voltage
110V AC
For Media Type
Bleach, Calcium Chloride, Citric Acid, Glycerin, Hydrochloric Acid, Nitric Acid, Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide, Sulfuric Acid, Water
Not Recommended Chemicals
Acetic Acid (Glacial), Acetic Acid 20%, Acetic Acid 80%, Acetone, Ammonia (Liquids), Ammonium Hydroxide, Chromic Acid 30%, Chromic Acid 50%, Cyclohexane, DEF, Ethyl (Ethanol), Ethyl Acetate, Ethylene Glycol, Formaldehyde, Formaldehyde 40%, Formic Acid, Heptane, Hexane, Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Isopropyl (Isopropanol), Kerosene, Lacquer Thinners, Methyl (Methanol), Methyl Chloride, Methyl Ethyl Ketone (MEK), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Phosphoric Acid (40% Solution), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (75% - 100%), Toluene, Trichlorethylene (50%), Xylene
For Use With
9430
Nozzle Operation
Manual
Frequency (Hz)
50/60
Number of Phases
1
Hose Cover Material
PVC
Pump Package Type
Unmetered Dispensing with Manual Shut-Off
Hose Inside Dia.
1 in
Rated Voltage
110V AC
Hose Outside Dia.
1 1/4 in
Runs Dry
Yes
Hose Tube Material
PVC
Spout Connection Type
Hose Barb
Housing Material - Pumps
CPVC
Standards
UL Recognized Component (Motor Only)
Includes Bung Adapter
Yes
Suction Tube ID
1 1/3 in
Includes Discharge Hose
Yes
Suction Tube Material
CPVC
Includes Nozzle
Yes
Suction Tube OD
1 3/5 in

Product Description

Acid, base, and solvent electric drum pumps are made with corrosion-resistant materials that withstand a range of acidic and basic chemical concentrations. They are used to dispense and transfer moderate to large volumes of substances and solutions in laboratories and chemical processing plants.

Expertly Selected Product Pairings

Barrel Adaptor, Polyprop
$58.96 pkg | $58.96 ea
Item: 910888 | Pkg Qty: 1
Barrel Adaptor, Polyprop
$36.90 pkg | $36.90 ea
Item: 910888-1 | Pkg Qty: 1
Hand Nozzle,Polypropylene, 1IN
$188.22 pkg | $188.22 ea
Item: 911453-3 | Pkg Qty: 1
Coupling, Drum Pump
$43.43 pkg | $43.43 ea
Item: 924721-6 | Pkg Qty: 1

Item Barcode
9148987
Drum Pump,115VAC,1 Hp,60 Hz
 NameItemDescription
Grainger DropshipGrainger Dropship1DLP4Drum Pump, 115VAC,1 HP,
UNSPSC CODESUNSPSC CODES40151513
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Drum Pump, 115VAC,1 HP,

For more product information by email, click here