Home All Products Fluid Transfer & Pumps Water Pumps Centrifugal Pumps Straight Pumps (below 80' Of Max. Head) SKU: 914269
Share  
Print  
DAYTON

120/240 VAC Open Dripproof Centrifugal Pump, 1-Phase, 1-1/4" NPT Inlet Size

Hover over image to magnify
Pump,Centrifugal, 1/2 Hp, 1 Ph,
Pump,Centrifugal, 1/2 Hp, 1 Ph,

#914269 | Pkg Qty: 1

$365.31 pkg | $365.31 ea

Drop Ship Item

Shipping to 60045
|

Technical Specifications

Key Specifications
Agency Compliance
c UL us
Maximum GPM @ Head
67 gpm @ 10 ft.
Amps
8.4/4.8
Maximum Head
44
Bearing Type
Ball
Maximum Liquid Temperature
200°F
Bearings
Ball
Maximum Pressure
19.04 psi
Best Efficiency GPM @ Head
38 gpm @ 27 ft.
Maximum Specific Gravity
1
Best Efficiency Range GPM @ Head
19 to 63 GPM @ 35 to 15 ft.
Mfr. Part Number
2ZWP1
Brand
DAYTON
Mfr. Warranty Length
1 yr.
Drain Plug
Easily Accessible, 2 Position
Minimum GPM @ Head
10 gpm @ 40 ft.
Duty
Continuous
Motor Enclosure
ODP
Duty Cycle
Continuous
Motor RPM
3450
Frame
56J
Motor Type
Capacitor Start
GPM of Water @ 10 Ft. of Head
67
NEMA/IEC Frame
56J
GPM of Water @ 15 Ft. of Head
63
Number of Port Positions
4 Position
GPM of Water @ 150 Ft. of Head
63
Outlet Size
1 in. NPT
GPM of Water @ 20 Ft. of Head
57
Package Quantity
1
GPM of Water @ 25 Ft. of Head
48
Phase
1
GPM of Water @ 30 Ft. of Head
40
Port Rotation
4 Position Increments
GPM of Water @ 40 Ft. of Head
10
Pump Length
13-1/2 in.
Height
5-7/8 in.
Pump Size
1-1/4 in. X 1
Horsepower
1/2
Screw Material
Steel, Zinc Plated
Housing Material
Cast Iron
Seal Application
Long Life When not Run Dry or Pumping Abrasives
Hz
60
Seal Material
Buna-N, Carbon, Ceramic, Stainless Steel
Impeller Material
Cast Iron
Seal Type
Mechanical
Impeller Type
Semi Open
Service Factor
1.6
Inlet
1-1/4 in. NPT
Shaft Material
Stainless Steel
Inlet Pressure
200 psi
Shaft Size
5/8 in.
Item
Straight Centrifugal High Flow Pump
Shipping Weight
34.5 lb.
Length
13-1/2 in.
Type
Centrifugal
Liquid Compatibility
Nonflammable, Non Abrasive
Voltage
120/240 VAC
Maximum Case Pressure
200 psi
Volute Material
Cast Iron
Maximum Diameter Solids
7/16
Wetted Materials
Buna-N, Carbon, Cast Iron, Ceramic, Stainless Steel
Maximum Fluid Viscosity
100 SSU
Width
6-5/8 in.
General
Application
Suitable for general transfer, boiler feed, condensate return, water circulation, irrigation, cooling towers, filtration, and pressure boosting.
Intake Type
NPT
Best Efficiency Flow
38 gpm
Intake and Discharge Size
1 1/4 in , 1 in
Best Efficiency Head
27 ft
Manufacturer Warranty Length
1 yr
Compatible Discharge Pipe Size
1 in
Maximum Feet of Head
44 ft
Compatible Intake Pipe Size
1 1/4 in
Maximum Media Temperature
200 Degrees F
Compatible with Media Type
Non-Flammable Liquids
Minimum Media Temperature
40 Degrees F
Discharge Rotation
90 Degrees Increments
Motor Enclosure Type
ODP
Discharge Type
NPT
Motor Frame Designation
56J
Feet of Head (Minimum)
10 ft
Nameplate Voltage
115/230V AC
Flow Rate @ 10 ft of Head (Maximum)
67 gpm
Nominal Voltage
115/230V AC
Flow Rate @ 15 ft of Head (Maximum)
63 gpm
Pump Housing Material
Cast Iron
Flow Rate @ 20 ft of Head (Maximum)
57 gpm
Pumping Application
Aggressive Liquid Applications and Other General Purpose Pumping, Boiler Feed, Boosters, Chemical Processing, Condensate Return, Cooling Towers, Filtration, Fountains, General Transfer, Irrigation, Jockey Pump Service, Marine Applications, Spraying Systems, Utility, Water Circulation
Flow Rate @ 30 ft of Head (Maximum)
40 gpm
Shut Off Pressure (Maximum)
19 psi
Flow Rate @ 40 ft of Head (Maximum)
10 gpm
Solid Diameter (Maximum)
0.44 in
For Use With
Non-Flammable and Non-Abrasive Liquids Compatible with Pump Component Materials
Specific Gravity (Maximum)
1
Impeller Design
Semi-Open
Wetted Material
Buna-N, Carbon, Cast Iron, Ceramic, Stainless Steel
Includes
Manual

Product Description

Dayton close-coupled units pump continuously, producing high flow rates under low-head conditions. Designed for continuous low-pressure circulation and transfer of nonflammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications, fountains, boosters, water circulation, irrigation, spraying systems, jockey pump service, chemical processing, aggressive liquid applications, and other general purpose pumping compatible with pump component materials where no suction lift or self priming is required.

Expertly Selected Product Pairings

Shaft Seal, 5/8 In,Viton,
$64.72 pkg | $64.72 ea
Item: 914269-1 | Pkg Qty: 1
Motor
$379.58 pkg | $379.58 ea
Item: 927152-8 | Pkg Qty: 1
Shaft Seal, 5/8 In,Buna,
$34.68 pkg | $34.68 ea
Item: 931449 | Pkg Qty: 1

Compliance & Restrictions

California Proposition 65 Icon
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Documents

Dayton Close Coupled Centrifugal Pumps OIPM
Item Barcode
9142690
Pump,Centrifugal, 1/2 Hp, 1 Ph,
 NameItemDescription
Grainger DropshipGrainger Dropship2ZWP1Pump, Centrifugal,
UNSPSC CODESUNSPSC CODES40151503
VMRS (ATA) CODESVMRS (ATA) CODES053-006-009Pump, Centrifugal,

For more product information by email, click here