Share
Print
DAYTON
1-1/2-HP Self Priming Centrifugal Pump, 59 ft. Max. Head, 3/8" Max. Dia. Solids, Cast Iron
Hover over image to magnify
#912951 | Pkg Qty: 1
$1,193.19 pkg | $1,193.19 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Agency Compliance
c CSA us
Maximum Fluid Viscosity
31 SSU
Amps
16.9/8.6
Maximum GPM @ Head
89 gpm @ 2 ft.
Bearing Type
Ball
Maximum Head
59 ft.
Best Efficiency GPM @ Head
52 gpm @ 40 ft.
Maximum Liquid Temperature
180°F
Best Efficiency Range GPM @ Head
32 to 71 GPM @ 50 to 25 ft.
Maximum Pressure
25.5 psi
Brand
DAYTON
Maximum Specific Gravity
1
Drain Plug
Easily Accessible
Mfr. Part Number
4YKP9
Duty
Continuous
Mfr. Warranty Length
1 yr.
Frame
56J
Minimum GPM @ Head
2 gpm @ 58 ft.
GPM @ 10 PSI
72.6
Motor Design
Capacitor-Start/Run
GPM @ 20 PSI
41.8
Motor Enclosure
ODP
GPM @ 25 PSI
9.7
Motor RPM
3450
GPM of Water @ 10 Ft. of Head
83
Motor Type
Capacitor-Start, Capacitor-Run
GPM of Water @ 15 Ft. of Head
80
NEMA/IEC Frame
56J
GPM of Water @ 150 Ft. of Head
80
Outlet
1-1/2 in. NPT
GPM of Water @ 2 Ft. of Head
89
Outlet Size
1-1/2 in. NPT
GPM of Water @ 20 Ft. of Head
75
Package Quantity
1
GPM of Water @ 25 Ft. of Head
71
Phase
1
GPM of Water @ 30 Ft. of Head
66
Port Rotation
4 Position Increments
GPM of Water @ 40 Ft. of Head
52
RPM
3450
GPM of Water @ 5 Ft. of Head
86
Screw Material
Carbon Steel
GPM of Water @ 50 Ft. of Head
32
Seal Application
Non-Flammable Liquids Compatible with Pump Components
Height
10 in.
Seal Material
304 Stainless Steel, Carbon, Ceramic, Viton
Horsepower
1-1/2
Seal Type
Mechanical
Housing Material
Cast Iron
Self-Priming
Yes
Hz
60
Service Factor
1.2
Impeller Material
Cast Iron
Shaft Material
Stainless Steel
Impeller Type
Semi Open
Shipping Weight
50.06 lb.
Inlet
1-1/2 in. NPT
Suction Lift
25 ft.
Inlet Pressure
59.5 psi
Type
Transfer, Self Priming
Item
Centrifugal Pump
Voltage
115/230 VAC
Length
18-7/8 in.
Volute Material
Cast Iron
Maximum Case Pressure
85 psi
Wetted Materials
304 Stainless Steel, Cast Iron, Ceramic, Viton,Carbon
Maximum Diameter Solids
3/8 in.
Width
7-5/16 in.
General
Application
For General Purpose Chemical Transfer From Drums or Storage Tanks.
Impeller Design
Semi-Open
Best Efficiency Flow
88 gpm
Intake Type
NPT
Best Efficiency Head
25 to 50 ft
Maximum Feet of Head
59 ft
Compatible with Media Type
Non-Abrasive Liquids, Non-Flammable Liquids
Minimum Media Temperature
40 Degrees F
Discharge Rotation
90 Degrees Increments
Nominal Voltage
115/230V AC
Discharge Type
NPT
Solid Diameter (Maximum)
0.38 in
Feet of Head (Minimum)
2 ft
Suction Lift (Maximum)
25 ft
For Use With
Non-Flammable/Non-Abrasive Liquids Compatible with Pump Wetted Materials
Wetted Material
304 Stainless Steel, Carbon, Cast Iron, Ceramic, Viton
GPM @ 15 PSI
60.8
Product Description
Dayton transfer pump is designed for transferring liquids from drums or storage tanks. The pumps are designed to pump non-abrasive liquids which are compatible with pump component materials. Handles liquids from 40°F and up. This is a manual unit, no controls are supplied.
Expertly Selected Product Pairings
Documents
Item Barcode
Transfer Pump,1 1/2 Hp, Cast
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 4YKP9 | Transfer Pump,1 1/2 |
 | UNSPSC CODES | 40151503 | |
 | VMRS (ATA) CODES | 053-006-009 | Transfer Pump,1 1/2 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here