Share
Print
DAYTON
Marine Centrifugal Pump: Brass, 12V DC, 14 ft Max Head, 3/4 in , 3/4 in Intake and Discharge Size
Hover over image to magnify
#912950-5 | Pkg Qty: 1
$387.27 pkg | $387.27 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Amps
10-1/2
Maximum Fluid Viscosity
31 SSU
Bearing Type
Ball
Maximum GPM @ Head
19 @ 0 ft.
Bearings
Ball
Maximum Head
14 ft.
Best Efficiency GPM @ Head
14 gpm @ 5 ft.
Maximum Liquid Temperature
180°F
Best Efficiency Range GPM @ Head
8 to 19 GPM @ 10 to 2 ft.
Maximum Pressure
6.1 psi
Brand
DAYTON
Maximum Specific Gravity
1
Drain Plug
1/8 in. NPT
Mfr. Part Number
5PXX5
Duty
Intermittent
Mfr. Warranty Length
1 yr.
Duty Cycle
Intermittent
Minimum GPM @ Head
8 @ 10 ft.
GPH of Water @ 5 Ft. of Head
840
Motor Enclosure
Closed
GPM @ 1 Ft. of Head
18
Motor RPM
5000
GPM @ 7 Feet of Head
11.8
Motor Type
DC
GPM of Water @ 0 Ft. of Head
19
Outlet Size
3/4 in. NPT
GPM of Water @ 10 Ft. of Head
8
Pack Quantity
1
GPM of Water @ 2 Ft. of Head
17
Port Rotation
90 Degree Increments
GPM of Water @ 3 Ft. of Head
16
Screw Material
Stainless Steel
GPM of Water @ 5 Ft. of Head
14
Seal Application
Non-Flammable Liquids Compatible with Pump Components
Height
5 in.
Seal Material
Carbon/Ceramic, Stainless Steel, Viton
Horsepower
1/8
Seal Type
Mechanical
Housing Material
Brass
Service Factor
1.16
Impeller Material
Brass
Shaft Material
Stainless Steel
Impeller Type
Semi Open
Shaft Size
5/16 in.
Inlet
3/4 in. NPT
Shipping Weight
8.8 lb.
Inlet Pressure
5.9 psi
Type
Self Priming
Item
Straight Centrifugal High Flow Pump
Voltage
12 VDC
Length
9-3/8 in.
Volute Material
Brass
Liquid Compatibility
Nonflammable, Non Abrasive
Wetted Materials
Brass, Buna N, Carbon, Ceramic, Stainless Steel, Viton
Maximum Case Pressure
200 psi
Width
4 in.
Maximum Diameter Solids
1/8 in.
General
Application
Pumps are suitable for dewatering and liquid transfer
where there are non-abrasive non flammable liquids compatible with the pump material make-up.
Maximum Media Temperature
180 Degrees F
Compatible Intake Pipe Size
3/4 in
Minimum Media Temperature
40 Degrees F
Discharge Rotation
90 Degrees Increments
Motor Ambient Temperature (Maximum)
104 Degrees F
Discharge Type
NPT
Nameplate Voltage
12V DC
For Use With
Non-Flammable Liquids Compatible with Pump Component Materials
Shut Off Pressure (Maximum)
6 psi
Impeller Design
Semi-Open
Solid Diameter (Maximum)
0.13 in
Includes
Manual
Specific Gravity (Maximum)
1
Intake Type
NPT
Suction Lift (Maximum)
4.5 ft
Intake and Discharge Size
3/4 in , 3/4 in
Product Description
DC Centrifugal Pumps are suitable for dewatering and liquid transfer where there are non-abrasive, non flammable liquids compatible with the pump material make-up. The units produce high flow rates under low-head conditions. These units are manual units, no controls are supplied. All pumps feature a mechanical seal.
Expertly Selected Product Pairings
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Pump,Marine/Rv, 12 Vdc, 10.5
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 5PXX5 | Pump,Marine/ RV, 12 VDC, |
 | UNSPSC CODES | 40151503 | |
 | VMRS (ATA) CODES | 053-006-009 | Pump,Marine/ RV, 12 VDC, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here