Share
Print
FILL-RITE
Hand Operated Drum Pump, Rotary, Unmetered Dispensing with Manual Shut-Off
Hover over image to magnify
#912125-2 | Pkg Qty: 1
$389.16 pkg | $389.16 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Action Type
Rotary
Mfr. Warranty Length
2 yr.
Adapter Material
Cast Iron
Mounting Type
2" NPT with Supplied Bung Adaptor
Agency Compliance
UL/cUL
Mounts
2" NPT Opening
Amps AC
5-1/2
Nozzle Material
Aluminum
Bearing Type
Permanently Lubricated Sealed Ball
Nozzle Type
Manual
Brand
FILL-RITE
Outlet Size
3/4" FNPT
Bypass Valve
Internal
Outside Height
18 in.
Compatible Fluids
Diesel, Gasoline, Kerosene, E15, Biodiesel up to B20
Overall Length
13 in.
Design
Hand Operated Positive Displacement Rotary
Overall Width
11 in.
Duty Cycle
30 min
Pack Quantity
1
Food Grade
No
Power Source
Hand Operated
GPM
10
Pump Design
Rotary Vane
Hand Operated Pump Action Type
Hand Operated Rotary Pumps
RPM
1725 and 1425
Height
13-1/4 in.
Seal Material
BUNA-N
Hose Diameter
5/8 in.
Seal Type
Mechanical
Hose Length
8 ft.
Self-Priming
Yes
Hose Size
5/8" x 8'
Series
100 SERIES, ROTARY PUMPS
Housing Material
Cast Iron
Shipping Weight
19 lb.
Inlet Size
1" FNPT
Spout Material
Aluminum
Item
Hand Operated Drum Pump
Type
Rotary Action
Maximum Viscosity
1500 SSU
Voltage
115 VAC and 230 VAC
Metered
Yes
Wetted Materials
301 Stainless Steel, Buna-N, Cast Iron, Zinc Plated Steel
Mfr. Part Number
FR112AC
Width
6-3/8 in.
General
Adapter Connection Type
MNPT
Includes Discharge Hose
Yes
Application
Fuel and Light Oils
Includes Nozzle
Yes
Bung Connection Dia.
2 in
Includes Suction Tube
Yes
Compatible Chemicals
Antifreeze (Coolant), Automatic Transmission Fluid, Biodiesel, Brake Fluid, Diesel Fuel, E85, Ethylene Glycol, Glycerin, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Kerosene, Motor Oil, Stoddard Solvent (Mineral Spirits)
Max. Flow Rate
13 oz per stroke
Discharge Connection Type
FNPT
Max. Fluid Temp.
150 Degrees F
Discharge Tube Outlet ID
3/4 in
Max. Head - Pumps
6 ft
Discharge Tube Outlet OD
7/8 in
Max. Head Pressure
50 psi
Features
3/4 in x 8 ft Hose, Gal. Counter, Non Sparking Hose End Spout, Suction Pipe
Max. Oil Flow
13 oz per stroke
For Container Size
55 gal
Max. Outlet Pressure
50 psi
For Container Type
Drum
Min. Operating Temp.
0 Degrees F
For Media Type
Antifreeze, Automatic Transmission Fluid, Biodiesel, Brake Fluid, Diesel Fuel, E85, Ethylene Glycol, Glycerin, Hydraulic Oil, Kerosene, Motor Oil, Stoddard Solvent
Not Recommended Chemicals
Acetic Acid (Glacial), Acetic Acid 20%, Acetic Acid 80%, Acetone, Ammonia (Liquids), Ammonium Hydroxide, Anhydrous Ammonia, Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Citric Acid 50%, Cyclohexane, DEF, Deionized Water, Ethyl (Ethanol), Ethyl Acetate, Fertilizers, Formic Acid, Fresh Water, Fungicides, Gasoline, Heptane, Herbicides, Hexane, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Isopropyl (Isopropanol), Lacquer Thinners, Lithium Grease, Methyl (Methanol), Methyl Chloride, Methyl Ethyl Ketone (MEK), Naphtha, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Paint, Paint Thinner, Pesticides, Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Sodium Hypochlorite/Bleach (to 20%), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%), Toluene, Trichlorethylene (50%), Turpentine, Windshield Washer Fluid, Xylene
For Use With
Fuel and Light Oils
Nozzle Operation
Manual
Height Above Container
14 13/16 in
Pump Connection ID
2 in
Hose Cover Material
Neoprene
Pump Connection OD
2 1/8 in
Hose Inside Dia.
3/4 in
Pump Package Type
Unmetered Dispensing with Manual Shut-Off
Hose Outside Dia.
7/8 in
Runs Dry
Yes
Hose Tube Material
Nitrile
Standards
UL, cUL Listed Pump
Housing Material - Pumps
Cast Iron
Suction Tube ID
1 in
Includes
Check Valve, Pressure Relief Valve, Strainer
Suction Tube Material
Steel
Includes Bung Adapter
Yes
Suction Tube OD
1 1/8 in
Product Description
Automotive fluids, fuel, and oil hand drum pumps are designed for dispensing and transferring small volumes of fluids such as diesel fuel, coolant, washer fluid, power steering fluid, transmission fluid, and engine oil. These pumps are commonly used during automotive service and fleet maintenance to drain fuel tanks and remove spent fluids from vehicles and engine-powered machinery.
Expertly Selected Product Pairings
Item Barcode
Hand Operated Drum Pump, Fuel
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 4FY14 | Hand Operate d Drum Pump, |
 | UNSPSC CODES | 40151532 | |
 | VMRS (ATA) CODES | 053-006-009 | Hand Operate d Drum Pump, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here