Share
Print
DAYTON
Marine Centrifugal Pump: Brass, 12V DC, 17 ft Max Head, 3/4 in , 3/4 in Intake and Discharge Size
Hover over image to magnify
#911561-5 | Pkg Qty: 1
$361.71 pkg | $361.71 ea
Drop Ship Item
Shipping to 60045
Technical Specifications
Key Specifications
Amps
8-1/2
Maximum Case Pressure
200 psi
Bearing Type
Ball
Maximum Diameter Solids
1/8 in.
Bearings
Ball
Maximum Fluid Viscosity
31 SSU
Best Efficiency GPM @ Head
11 gpm @ 15 ft.
Maximum GPM @ Head
21 @ 0 ft.
Best Efficiency Range GPM @ Head
3 to 16 GPM @ 20 to 10 ft.
Maximum Head
17 ft.
Brand
DAYTON
Maximum Liquid Temperature
180°F
Drain Plug
1/8 in. NPT
Maximum Pressure
9.5 psi
Duty
Intermittent
Maximum Specific Gravity
1
Duty Cycle
Intermittent
Mfr. Part Number
5PXX4
GPH of Water @ 5 Ft. of Head
660
Mfr. Warranty Length
1 yr.
GPM @ 1 Ft. of Head
12.6
Minimum GPM @ Head
3 @ 20 ft.
GPM @ 7 Feet of Head
9.8
Motor Enclosure
Closed
GPM of Water @ 0 Ft. of Head
13
Motor RPM
5000
GPM of Water @ 10 Ft. of Head
8
Motor Type
DC
GPM of Water @ 15 Ft. of Head
4
Outlet Size
3/4 in. NPT
GPM of Water @ 150 Ft. of Head
4
Pack Quantity
1
GPM of Water @ 2 Ft. of Head
12.2
Port Rotation
180 Degree Increments
GPM of Water @ 20 Ft. of Head
3
Screw Material
Stainless Steel
GPM of Water @ 3 Ft. of Head
11.7
Seal Application
Non-Flammable Liquids Compatible with Pump Components
GPM of Water @ 5 Ft. of Head
11
Seal Material
Carbon/Ceramic, Stainless Steel, Viton
Height
3-3/8 in.
Seal Type
Mechanical
Horsepower
1/8
Service Factor
1.16
Housing Material
Brass
Shaft Material
Stainless Steel
Impeller Material
Brass
Shaft Size
5/16 in.
Impeller Type
Semi Open
Shipping Weight
5.6 lb.
Inlet
3/4 in. NPT
Type
Centrifugal
Inlet Pressure
6.5 psi
Voltage
12 VDC
Item
Straight Centrifugal High Flow Pump
Volute Material
Brass
Length
7-1/8 in.
Wetted Materials
Brass, Buna N, Carbon, Ceramic, Stainless Steel, Viton
Liquid Compatibility
Nonflammable, Non Abrasive
Width
4-5/16 in.
General
Application
Pumps are suitable for dewatering and liquid transfer
where there are non-abrasive non flammable liquids compatible with the pump material make-up.
Intake and Discharge Size
3/4 in , 3/4 in
Best Efficiency Head
15 ft
Maximum Feet of Head
17 ft
Compatible Intake Pipe Size
3/4 in
Maximum Media Temperature
180 Degrees F
Compatible with Media Type
Non-Abrasive Liquids, Non-Flammable Liquids
Minimum Media Temperature
40 Degrees F
Discharge Rotation
180 Degrees Increments
Motor Ambient Temperature (Maximum)
104 Degrees F
Discharge Type
NPT
Nameplate Voltage
12V DC
For Use With
Non-Flammable Liquids Compatible with Pump Component Materials
Pumping Application
Condensate Return, Filtration, Fluid Transfer, Marine Applications and Irrigation
Impeller Design
Semi-Open
Shut Off Pressure (Maximum)
10 psi
Includes
Manual
Solid Diameter (Maximum)
0.13 in
Intake Type
NPT
Specific Gravity (Maximum)
1
Product Description
Dayton DC Centrifugal Pumps are suitable for dewatering and liquid transfer where there are non-abrasive non flammable liquids compatible with the pump material make-up. The units produce high flow rates under low-head conditions. These units are manual units, no controls are supplied. All pumps feature a mechanical seal.
Expertly Selected Product Pairings
Compliance & Restrictions
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Item Barcode
Centrifugal Pump, 12 Vdc, 8.5
| Name | Item | Description | |
|---|---|---|---|
 | Grainger Dropship | 5PXX4 | Centrifugal Pump, 12 VDC, |
 | UNSPSC CODES | 40151503 | |
 | VMRS (ATA) CODES | 053-006-009 | Centrifugal Pump, 12 VDC, |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here