Home All Products Pipe, Tubing & Fittings Flared Fittings SAE 37 Degree (JIC) Flare Fittings Unions SKU: 96356
Share  

Share Item

* required
Print  
APPROVED SUPPLIER

37 deg. Male JIC to Male JIC Straight, Carbon Steel, .88 x 7/8"-14

Hover over image to magnify
37° Jic Union 5/8
37° Jic Union 5/8
Double tap image to magnify
37° Jic Union 5/8
37° Jic Union 5/8

#96356Pkg Qty: 5

In Stock

Shipping to 43085
|
Catalog: F19

Shipping Restrictions May Apply

This product cannot be shipped to some parts of the United States and Canada.
<h6 id="sae37jicsteelstandardhexunionfitting">Sae 37° (Jic) Steel Standard Hex Union Fitting</h6> <ul> <li>Working Pressure Up To 10,000 Psi, Depending On Tube And Fitting Size. </li> <li>Used With Copper, Brass, Steel, Aluminum, And Other Tubing That Can Be Flared. </li> <li>Applications Include Medium And High Pressure Lines On Heavy Construction, Agricultural, And Transportation Equipment. </li> <li>Meets Or Exceeds Asa, Asme, Sae, And Ms Specifications. </li> <li>Good Resistance To Vibration. Use Two Or Three Piece Nut Design Where Greater Vibration Resistance Is Required. </li> <li>Tube Outside Diameter: 5/8 </li> <li>Thread Size: 7/8-14 </li> <li>Cross Reference: C5305 X 10 </li> <li>Assembly Instructions: </li> <li>Slide Nut On Tubing. Threaded End Of Nut Must Face Out. </li> <li>Slide Sleeve On Tubing (3-Piece Assembly). Collar End Of Sleeve Must Face Out. </li> <li>Flare Tubing And Check Flare Diameter. Examine For Excessive Thin-Out. On Thin Wall Tubing, Use Double Flare To Prevent Pinch-Off. </li> <li>Assemble Tubing To Fitting Body. Tube Nut Should Be Turned Hand Tight. </li> <li>Tighten Assembly With A Wrench. 2-Piece Nut Assembly 3-Piece Nut Assembly</li> </ul>
Sae 37° (Jic) Steel Standard Hex Union Fitting
  • Working Pressure Up To 10,000 Psi, Depending On Tube And Fitting Size.
  • Used With Copper, Brass, Steel, Aluminum, And Other Tubing That Can Be Flared.
  • Applications Include Medium And High Pressure Lines On Heavy Construction, Agricultural, And Transportation Equipment.
  • Meets Or Exceeds Asa, Asme, Sae, And Ms Specifications.
  • Good Resistance To Vibration. Use Two Or Three Piece Nut Design Where Greater Vibration Resistance Is Required.
  • Tube Outside Diameter: 5/8
  • Thread Size: 7/8-14
  • Cross Reference: C5305 X 10
  • Assembly Instructions:
  • Slide Nut On Tubing. Threaded End Of Nut Must Face Out.
  • Slide Sleeve On Tubing (3-Piece Assembly). Collar End Of Sleeve Must Face Out.
  • Flare Tubing And Check Flare Diameter. Examine For Excessive Thin-Out. On Thin Wall Tubing, Use Double Flare To Prevent Pinch-Off.
  • Assemble Tubing To Fitting Body. Tube Nut Should Be Turned Hand Tight.
  • Tighten Assembly With A Wrench. 2-Piece Nut Assembly 3-Piece Nut Assembly
Pkg Qty 5 | Order Qty 1
Where will this product be shipped?

Technical Specifications

Brand
APPROVED SUPPLIER
Mfr. Part Number
96356
DOT Approved
No
Package Quantity
5
Finish
Trivalent Zinc Plated
Shape
Straight
Fitting Style
Male JIC to Male JIC
Shipping Weight
0.98 lb.
Fitting Thread Size
7/8"-14
System of Measurement
Fractional
Fitting Type
MJIC Union
Temperature Range (Deg. F)
-65 to +400 deg. F
Grade
1045
Tube Flare
37 deg.
Heat Treated
No
Tube Outside Diameter
.88
Item
Flare Fitting
Vibration Resistance
Good
Material
Carbon Steel
Working Pressure
3500

Product Description

Sae 37° (Jic) Steel Standard Hex Union Fitting
  • Working Pressure Up To 10,000 Psi, Depending On Tube And Fitting Size.
  • Used With Copper, Brass, Steel, Aluminum, And Other Tubing That Can Be Flared.
  • Applications Include Medium And High Pressure Lines On Heavy Construction, Agricultural, And Transportation Equipment.
  • Meets Or Exceeds Asa, Asme, Sae, And Ms Specifications.
  • Good Resistance To Vibration. Use Two Or Three Piece Nut Design Where Greater Vibration Resistance Is Required.
  • Tube Outside Diameter: 5/8
  • Thread Size: 7/8-14
  • Cross Reference: C5305 X 10
  • Assembly Instructions:
  • Slide Nut On Tubing. Threaded End Of Nut Must Face Out.
  • Slide Sleeve On Tubing (3-Piece Assembly). Collar End Of Sleeve Must Face Out.
  • Flare Tubing And Check Flare Diameter. Examine For Excessive Thin-Out. On Thin Wall Tubing, Use Double Flare To Prevent Pinch-Off.
  • Assemble Tubing To Fitting Body. Tube Nut Should Be Turned Hand Tight.
  • Tighten Assembly With A Wrench. 2-Piece Nut Assembly 3-Piece Nut Assembly

Item Barcode

0963560
37&deg; Jic Union 5/8

For more product information by email, click here

Compare

You can compare up to three items at a time

Compare

You are already comparing this item.

Alternate Products

No alternate products are currently available.