C5129 X 8 Steel Fitting 37 Degree

Sae 37° (Jic) Steel Cap Fitting

• Working Pressure Up To 10,000 Psi, Depending On Tube And Fitting Size.
• Used With Copper, Brass, Steel, Aluminum, And Other Tubing That Can Be Flared.
• Applications Include Medium And High Pressure Lines On Heavy Construction, Agricultural, And Transportation Equipment.
• Meets Or Exceeds Asa, Asme, Sae, And Ms Specifications.
• Good Resistance To Vibration. Use Two Or Three Piece Nut Design Where Greater Vibration Resistance Is Required.
• Hydraulic, Instrumentation, And Chemical Processing Systems.
• Tube Outside Diameter: 1/2
• Thread Size: 3/4-16
• Cross Reference: C5129 X 8
• Assembly Instructions:
• Slide Nut On Tubing. Threaded End Of Nut Must Face Out.
• Slide Sleeve On Tubing (3-Piece Assembly). Collar End Of Sleeve Must Face Out.
• Flare Tubing And Check Flare Diameter. Examine For Excessive Thin-Out. On Thin Wall Tubing, Use Double Flare To Prevent Pinch-Off.
• Assemble Tubing To Fitting Body. Tube Nut Should Be Turned Hand Tight.
• Tighten Assembly With A Wrench. 2-Piece Nut Assembly 3-Piece Nut Assembly