Share  
Print  
APPROVED SUPPLIER

10005B-Y05 Barb Tite End

Hover over image to magnify
Barb Mender 5/16
Barb Mender 5/16

#92073 | Pkg Qty: 10

In Stock

Shipping to 60045
|
Catalog: H28

Technical Specifications

Brand
APPROVED SUPPLIER
Mfr. Part Number
92073
Grade
CA360
Package Quantity
10
Hose Cutoff Factor
0.44 in.
Series
100 'B' Series Barb-Tite
Hose Hex Size
9/16 in.
Shipping Weight
0.37 lb.
Hose Inside Diameter
5/16 in.
System of Measurement
Fractional
Item
Hose Mender
Working Pressure
Determined by maximum working pressure for hose size
Material
Brass

Product Description

Low Pressure Hose Mender Barb-Tite Hose End
  • 100 'B' Series.
  • Material: Ca360 Brass
  • Hose Inside Diameter: 5/16
  • Applications: Low Pressure Shop Or Service Air Lines.
  • Cut-Off Factor: 7/16
  • Cross Reference: 10005B-Y05
  • For Use With H100 , H101 , And H201 Hose. To Assemble. Lubricate Insert. Hold Hose At Angle And Push On And Up Over First Barb. Continue To Push Straight On Until Hose Is Seated Under Protective Plastic Cap. To Disassemble. Split Hose, But Do Not Cut Completely Through Hose Because The Sealing Edge Of Barb Could Be Damaged. Bend Hose And Remove With Quick Pull.
Item Barcode
0920730
Barb Mender 5/16
 NameItemDescription
WEATHERHEADWEATHERHEAD10005B-Y05BARB-TITE 10005B-Y05
UNSPSC CODESUNSPSC CODES40141700BARB-TITE 10005B-Y05
VMRS (ATA) CODESVMRS (ATA) CODES053-008-004Fittings

For more product information by email, click here