Composites, Male Run Tee Swivel Connector, Air Brake Push-to-Connect, 1/8 in. x 1/8 in. x 1/8 in.
Technical Specifications
Product Description
Typical Applications:
• Air brakes, instrumentation, air controls, air bags, and air seats.
• Exceeds DOT pressure requirements for air brake systems.
• For use with SAE J844 type A or B air brake tubing.
• Pre-Applied PTFE Based Pipe Sealant On All Male Pipe Threads.
• Quick Disconnect - Simply push tubing In, no tools or loose parts to handle in tight places.
• Pipe threads are the most common fitting style used in the United States and Canada.
• Crosses References: Parker W371PLP-2-2, Phillips 12-99022
| Assembly | Disassembly |
 |  |
| Insert tube end into fitting, sliding I.D. of the tube over insert (friction is felt as tube slides past O-Ring). Continue to push tube in until it bottoms out. | Use thumb and forefinger to disconnect tube. Hold down the top of the insert against the fitting body and pull out the tubing with the other hand. No tools needed. |
Compliance & Restrictions
| Name | Item | Description | |
|---|---|---|---|
 | Phillips | 12-99022 | MALE RUN TEE 1/8 X 1/8 |
 | UNSPSC CODES | 27131600 | Air fittings and connectors |
 | VMRS (ATA) CODES | 053-008-004 | MALE RUN TEE 1/8 X 1/8 |
All information contained herein is the property of Imperial Supplies LLC, and is published here for your use only. Any reproduction or distribution of this information without prior written consent from Imperial Supplies LLC is strictly prohibited.
Imperial Supplies LLC does not provide services and products outside the United States
For more product information by email, click here